Search results for "electron spectroscopy"
showing 10 items of 525 documents
Oxidized graphene in ionic liquids for assembling chemically modified electrodes: a structural and electrochemical characterization study
2012
Dispersions of graphene oxide (GO) nanoribbons in ionic liquids, ILs (either 1-butyl-3-methylimidazolium chloride (BMIM-Cl-) or 1-butylpyridinium chloride (-Bupy-Cl-)) have been used to assemble modified screen printed electrodes (SPEs). The graphene oxide/ionic liquid dispersions have been morphologically and structurally characterized by the use of several techniques: X-ray photoelectron spectroscopy (XPS), Fourier transform-infrared (FT-IR) spectroscopy, high-resolution-transmission electron microscopy (HR-TEM). The assembled modified SPEs have then been challenged with various compounds and compared to several electro-active targets. In all cases high peak currents were detected, as wel…
Carbon nanotubes thin filters for x-ray detectors in space
2022
In this paper, we present the first results from an investigation performed on nanometric thin pellicles based on carbon nanotubes (CNT) of potential interest for manufacturing large area optical blocking filters to protect soft X-ray detectors in astrophysics space missions. In order to evaluate the effective capability of such materials to block UV/VIS/IR radiation, while being highly transparent in the soft X-rays and strong enough to withstand the severe launch stresses, we have performed a suite of characterization measurements. These include: UV/VIS/IR and X-ray absorption spectroscopy, X-ray Photoelectron Spectroscopy and Scanning Electron Microscopy on bare and Al coated small self-…
N-Doped Anatase/Rutile Photocatalysts for the Synthesis of Aromatic Aldehydes Under Ultraviolet and Solar Irradiation
2015
N-doped anatase/rutile photocatalysts were prepared by a sol-gel method, using TiCl4 as TiO2 precursor and urea as N-dopant source. The catalysts required a thermal treatment at temperature higher than 300 degrees C to achieve actual nitrogen doping; this treatment also allowed obtaining crystalline and hydrophobic samples. Moreover, nitrogen doping modified the surface of samples by increasing the anatase to rutile phase ratio and hydrophilicity. The catalysts were characterized by BET specific surface area, XRD, ESEM, TGA, FT-IR, DRS and XPS measurements, with particular attention to the assessment of the N-doping effect. It was found that XPS analysis should be used together with DRS and…
Changes in surface stress, morphology and chemical composition of silica and silicon nitride surfaces during the etching by gaseous HF acid
2007
Abstract HF acid attack of SiO2 and Si3N4 substrates is analyzed to improve the sensitivity of a sensor based on microcantilever. Ex situ analysis of the etching using XPS, SIMS and AFM show significant changes in the anisotropy and the rate of the etching of the oxides on SiO2 and Si3N4 surface. Those differences influence the kinetic evolution of the plastic bending deflection of the cantilever coated with SiO2 and Si3N4 layer, respectively. The linear dependence between the HF concentration and the Si3N4 cantilever bending corresponds to a deep attack of the layer whereas the non-linear behavior observed for SiO2 layer can be explained by a combination of deep and lateral etching. The ca…
Interaction of Gold with Co-Condensed and Grafted HMS-SH Silica: A 29Si {1H} CP-MAS NMR Spectroscopy, XRD, XPS and Au LIII EXAFS Study
2010
Hexagonal mesoporous silica (HMS) is functionalised with mercaptopropyl groups by adopting two different procedures ; co-condensation and grafting. In both cases tetraethylorthosilicate (TEOS) and 3-mercaptopropyltriethoxysilane (3-MPTES) are used as the silicon and sulfur precursors, respectively. The obtained materials are analysed by several techniques such as N 2 sorption, TG-DTA, XRD, SAXS and-solid state 29 Si { 1 H} CP-MAS NMR spectroscopy. By taking advantage of the chemical interaction between gold and the -SH groups, the effect of the thiol addition procedure on the supporting capability of the functionalised silica is evaluated by depositing gold through the incipient wet impregn…
Nanostructured Polymer Brushes With Reversibly Changing Properties
2002
AbstractWe investigated the interplay between different mechanisms of the lateral and vertical segregation in the synthesized via “grafting from” approach symmetric A/B (where A and B are poly(styrene-co-2,3,4,5,6-pentafluorostyrene) and poly(methylmethacrylate), respectively) polymer brushes upon exposure to different solvents. We used X-ray photoemission electron spectroscopy and microscopy (X-PEEM), AFM, water contact angle measurements, and oxygen plasma etching to study morphology of the brushes. The ripple morphology after toluene (nonselective solvent) revealed elongated lamellar-like domains of A and B polymers alternating across the surface. The dimple-A morphology consisting of ro…
Deconvolution of XPS spectra
1991
The resolution of XPS spectra is limited mainly by instrumental parameters like the spectral line width of the exciting X-ray source and the finite energy resolution of the electron analyzer. If the line broadening functions resulting from the instrumental setup can be estimated and expressed by a spectrometer function, a mathematical recalculation of the intrinsic signal is possible by deconvolution. With the method presented in this paper, a resolution enhancement by a factor of 3 can be obtained. Measured spectra of physically correlated spin orbit doublets have been deconvoluted, and it is shown, that the intensity ratios and the positions are comparable with results obtained by highly …
Adsorbates on thin iron(100) films
1995
The electronic and magnetic properties of different kinds of adsorbates on thin magnetized Fe(100) films have been investigated by means of spin resolving photoelectron spectroscopy. The study has been carried out with atomically physisorbed xenon, the molecule carbon monoxide, and metallic gold. The spin splitting of the Xe 5p signal can be explained by magnetic interactions with the final ionic hole state. By spin analysis, it could be shown that at room temperature for low exposures the adsorption of CO is dissociative and with increasing exposure additionally molecular. The Au related features for the monolayer show different line shapes in both spin channels but no splittings due to an…
2019
Energy-level alignment at organic-metal interfaces plays a crucial role for the performance of organic electronic devices. However, reliable models to predict energetics at strongly coupled interfaces are still lacking. We elucidate contact formation of 1,2,5,6,9,10-coronenehexone (COHON) to the (1 1 1)-surfaces of coinage metals by means of ultraviolet photoelectron spectroscopy, x-ray photoelectron spectroscopy, the x-ray standing wave technique, and density functional theory calculations. While for low COHON thicknesses, the work-functions of the systems vary considerably, for thicker organic films Fermi-level pinning leads to identical work functions of 5.2 eV for all COHON-covered meta…
Complexes of organometallic compounds
1974
Abstract Several new complexes formed by PhTlCl 2 with tridentate ligands (with ONO and SNO donor atoms) and a tetradentate ligand (with ONNO donor atoms), have been prepared. The complexes show 1/1 organothallium(lll)/Ligand ( = L 2− ) stoichiometry. Their nature and configuration are investigated in the solid state by vibrational spectroscopy, and in solution by electronic spectroscopy. The existence of chelation by the dianionic ligands on Tl III is inferred, and suggestions are made concerning the Tl III coordination number and the stereochemistry of the complexes.