Search results for "engineering.material"
showing 10 items of 2352 documents
Electrochemical treatment of aqueous solutions of organic pollutants by electro-Fenton with natural heterogeneous catalysts under pressure using Ti/I…
2018
The treatment of toxic organic pollutants by electro-Fenton (EF) presents some drawbacks such as the necessity to work at low pH and the low solubility of oxygen in water contacted with air or oxygen at room pressure that results often in slow and relatively low abatements. Here, the coupled adoption of natural heterogeneous catalysts and of relatively high pressure was proposed in order to improve the performances of EF for the treatment of organic pollutants. Caffeic acid (CA) and 3-chlorophenol were used as model resistant organic pollutants. EF process was performed using both conventional homogeneous FeSO4 and natural heterogeneous catalysts (pyrite, chalcopyrite, Fe2O3 and Fe3O4) as i…
Biotrickling filter modeling for styrene abatement. Part 2: Simulating a two-phase partitioning bioreactor.
2017
Abstract A dynamic model describing styrene abatement was developed for a two-phase partitioning bioreactor operated as a biotrickling filter (TPPB-BTF). The model was built as a coupled set of two different systems of partial differential equations depending on whether an irrigation or a non-irrigation period was simulated. The maximum growth rate was previously calibrated from a conventional BTF treating styrene (Part 1). The model was extended to simulate the TPPB-BTF based on the hypothesis that the main change associated with the non-aqueous phase is the modification of the pollutant properties in the liquid phase. The three phases considered were gas, a water–silicone liquid mixture, …
A pilot-scale study of struvite precipitation in a stirred tank reactor: Conditions influencing the process
2008
Currently, the two most developed techniques for recovering phosphorus from wastewater consist of the formation of calcium phosphates and struvite (MgNH(4)PO(4).6H(2)O). In this work the influence of the operational conditions on the struvite precipitation process (pH in the reactor, hydraulic retention time, and magnesium:phosphorus, nitrogen:phosphorus, and calcium:magnesium molar ratios) have been studied. Twenty-three experiments with artificial wastewater were performed in a stirred reactor. In order to obtain the pH value maintenance during the crystallization process, a fuzzy logic control has been developed. High phosphorus removal efficiencies were reliably achieved precipitating t…
Papers accepted for publication in The Analyst
1973
On the use of a powder rheometer to characterize the powder flowability at low consolidation with torque resistances
2017
The Anton Paar Powder Cell was used to measure the torque necessary to rotate an impeller in beds of glass beads, sand and alumina powders aerated between no aeration to the minimum for fluidization. Measured torque values depend on the material tested, on the air flow rate applied, on the impeller depth and on the height of the impeller blade. The effect of the impeller depth is linear for low impeller depth and is less than linear at high depth values. A model was developed for the interpretation of the experimental results based on the idea that the material is shearing on the surface described by the impeller rotation. The model allows to estimate an effectiveness of the impeller in the…
Effect of surface finish on the mechanical behaviour of Dacron© 360 woven
2013
Abstract In the present paper some experimental analyses of Dacron© 360 woven with and without surface treatment are presented to evaluate the effect of this treatment on the constitutive behaviour. This woven, widely adopted in sail manufacturing, is obtained by weaving polyethylene terephthalate (PET) yarn and it shows some peculiar features due to the manufacturing process. The experimental tensile tests, clearly show the orthotropy behaviour of the material. The effect of the treatment results in a stiffer behaviour especially along the warp and bias direction and in an increment of ultimate strength in all directions.
Environmentally Friendly Fuel Usage: Economic Margin of Feasibility
2019
Abstract In the world there are two main problems concerning energy and ecology. Despite the crude oil price fluctuation, it has tended to increase. Moreover fossil fuel burning emits hazard compounds, including greenhouse gas. To solve them alternative fuels for vehicle have to be used. In due to properties, their usage impacts on the engine efficiency. The alternative fuel usage needs additional investment costs on the vehicle engines adaptation and fuel supply infrastructure. So, decisions must be based on mathematical apparatus. Three submodels were used in the suggested mathematical model: energy and economic indicator for fuels; energy and economic indicator for vehicles; criteria for…
Electrospun nanofibers: role of nanofibers in water remediation and effect of experimental variables on their nano topography and application process…
2021
Water is the elixir of life and the most elementary need for the survival of human beings on planet Earth. With rapid industrialization, globalization and human exploitation, natural water resources are diminishing at a startling rate wherein availability of potable water has drastically decreased in recent times and hence membrane technology is a highly pursued area for water purification. The simple and cost-effective electrospinning technique has evolved to be a state-of-the-art method for developing nanofibers of tailored thickness and diameters by combining a broad range of starting materials. This comprehensive review emphasizes on the demonstration of electrospun nanofibers based on …
Theoretical and practical aspects of chemical functionalization of carbon nanofibers (CNFs): DFT calculations and adsorption study
2011
The nitric acid-functionalized commercial carbon nanofibers (CNFs) were comprehensively studied by instrumental (XRD, BET, SEM, TGA) and theoretical (DFT calculations) methods. The detailed surface study revealed the variation in the characteristics of functionalized CNFs, such as a decreased (up to 34%) surface area and impacted structural, electronic and chemical properties. The effects of functional groups were studied by comparison with pristine nanofibers. The results showed that the C-C bond lengths of the modified CNFs varied significantly. Chemical functionalization altered the frontier orbitals of the pristine material, and therefore altered the nature of their interactions with ot…
Visible-light photoelectrodegradation of diuron on WO3 nanostructures
2018
[EN] The degradation of pesticide diuron has been explored by photoelectrocatalysis (PEC) under visible light illumination using two different WO3 nanostructures, obtained by anodization of tungsten. The highest degradation efficiency (73%) was obtained for WO3 nanosheets synthesized in the presence of small amounts of hydrogen peroxide (0.05 M). For that nanostructure, the kinetic coefficient for diuron degradation was 133% higher than that for the other nanostructure (anodized in the presence of fluoride anions). These results have been explained by taking into account the different architecture and dimensions of the two WO3 nanostructures under study.