Search results for "extraction"

showing 10 items of 2072 documents

Vibrational Spectrometry Strategies for Quality Control of Procymidone in Pesticide Formulations

2005

Abstract Two vibrational spectrometry–based methodologies were developed for procymidone determination in wettable powdered pesticide formulations. The Fourier‐transform infrared (FTIR) procedure was based on the selective extraction of procymidone by chloroform and determination by peak area measurement between 1451 and 1441 cm−1, using a baseline correction established between 1490 and 1410 cm−1, and a precision of 0.4% and a limit of detection of 0.01% w/w procymidone for a sample mass of 25 mg were obtained. For FT‐Raman determination, the selected conditions were peak area measurement between 1005 and 995 cm−1 Raman shift, with a baseline correction fixed between 1030 and 947 cm−1, and…

Detection limitChloroformChromatographyExtraction (chemistry)Analytical chemistryMass spectrometryAtomic and Molecular Physics and OpticsAnalytical Chemistrychemistry.chemical_compoundsymbols.namesakechemistryReagentsymbolsProcymidoneFourier transform infrared spectroscopyRaman spectroscopySpectroscopySpectroscopy Letters
researchProduct

Miniaturized matrix solid phase dispersion procedure and solid phase microextraction for the analysis of organochlorinated pesticides and polybromina…

2009

Abstract This work has developed a miniaturized method based on matrix solid phase dispersion (MSPD) using C18 as dispersant and acetonitrile–water as eluting solvent for the analysis of legislated organochlorinated pesticides (OCPs) and polybrominated diphenylethers (PBDEs) in biota samples by GC with electron capture (GC-ECD). The method has compared Florisil®-acidic Silica and C18 as dispersant for samples as well as different solvents. Recovery studies showed that the combination of C18–Florisil® was better when using low amount of samples (0.1 g) and with low volumes of acetonitrile–water (2.6 mL). The use of SPME for extracting the analytes from the solvent mixture before the injectio…

Detection limitChromatography GasChromatographyChemistryOrganic ChemistryPesticide ResiduesAnalytical chemistryGeneral MedicineSolid-phase microextractionBiochemistryDispersantBivalviaAnalytical ChemistrySolventElectron capture detectorHalogenated Diphenyl EthersHydrocarbons ChlorinatedAnimalsSample preparationSolid phase extractionGas chromatographyFood AnalysisSolid Phase MicroextractionJournal of Chromatography A
researchProduct

Fishing for a drug: solid-phase microextraction for the assay of clozapine in human plasma

1999

Solid-phase microextraction (SPME) was investigated as a sample preparation method for assaying the neuroleptic drug clozapine in human plasma. A mixture of human plasma, water, loxapine (as internal standard) and aqueous NaOH was extracted with a 100-micron polydimethylsiloxane (PDMS) fiber (Supelco). Desorption of the fiber was performed in the injection port of a gas chromatograph at 260 degrees C (HP 5890; 30 m x 0.53 mm I.D., 1 micron film capillary; nitrogen-phosphorous selective detection). Fibers were used repeatedly in up to about 75 analyses. The recovery was found to be 3% for clozapine from plasma after 30 min of extraction. However, in spite of the low recovery, the analyte was…

Detection limitChromatography GasChromatographymedicine.diagnostic_testChemistryReproducibility of ResultsLoxapineGeneral ChemistryReference StandardsSolid-phase microextractionSensitivity and SpecificityHigh-performance liquid chromatographyMatrix (chemical analysis)Therapeutic drug monitoringmedicineHumansSample preparationSolid phase extractionGas chromatographyClozapineJournal of Chromatography B: Biomedical Sciences and Applications
researchProduct

Automated Fourier Transform near Infrared Determination of Buprofezin in Pesticide Formulations

2005

An automated procedure has been developed for Fourier transform near infrared (FT-NIR) determination of buprofezin in pesticide formulations. This methodology is based on on-line pesticide extraction with acetonitrile from solid samples and its determination by using peak area absorbance measurements between 2147 and 2132 nm, corrected with a horizontal baseline established at 2091 nm. The repeatability, as a relative standard deviation of five independent analyses of 18.9 mg g−1 of buprofezin, was 0.06% and the limit of detection 5 mg L−1. The reagent consumption was clearly reduced compared with a chromatographic reference procedure from 40.4 mL acetonitrile per sample, required by high …

Detection limitChromatography010304 chemical physics010401 analytical chemistryExtraction (chemistry)Analytical chemistryRepeatability01 natural sciencesHigh-performance liquid chromatography0104 chemical sciencesAbsorbancechemistry.chemical_compoundsymbols.namesakeFourier transformchemistryReagent0103 physical sciencessymbolsAcetonitrileSpectroscopyJournal of Near Infrared Spectroscopy
researchProduct

Determination of thyreostatics in animal feed by micellar electrokinetic chromatography

1999

The determination of the thyreostatics 2-thiouracil, its derivatives (4-methyl-2-thiouracil, 4-propyl-2-thiouracil and 4-phenyl-2-thiouracil) and methimazole in manufactured dried animal feed by micellar electrokinetic chromatography (MEKC) is described. A 99 +/- 5% extraction yield at the 20 micrograms g-1 level (n = 8) was achieved by shaking the milled fodder with methanol-1 M NaOH (80 + 20). Aliquots of the supernatant were injected in a 75 microns x 33.5 cm uncoated silica capillary using pressure; separation was performed at 23 degrees C with 15 kV (positive polarity) in a background electrolyte (BGE) containing 40 mM sodium dihydrogenphosphate, 50 mM sodium dodecyl sulfate and 15 mM …

Detection limitChromatographyAnimal feedSodiumExtraction (chemistry)chemistry.chemical_elementAnimal FeedBiochemistryThiouracilMicellar electrokinetic chromatographyAnalytical Chemistrychemistry.chemical_compoundAntithyroid AgentschemistryFodderElectrochemistryAnimalsEnvironmental ChemistrySodium dodecyl sulfateQuantitative analysis (chemistry)SpectroscopyChromatography Micellar Electrokinetic CapillaryThe Analyst
researchProduct

A simple novel configuration for in-vial microporous membrane liquid–liquid extraction

2009

Abstract A novel arrangement for microporous membrane liquid–liquid extraction from the aqueous donor phase to the organic acceptor phase within a micro-vial, which is compatible with the chromatograph autosampler is presented. The device consisted of a stoppered glass micro-vial containing the organic solvent where the septum of the screw stopper was replaced by a sized piece of membrane which is hermetically assembled to the volumetric flask containing the aqueous donor solution. The placement of the membrane in alternative contact with the solutions was achieved by orbital agitation. As a preliminary study, 2-ethylhexyl 4-(dimethylamino)benzoate has been determined (limit of quantificati…

Detection limitChromatographyAqueous solutionChemistryOrganic ChemistryExtraction (chemistry)Membranes ArtificialGeneral MedicineMicroporous materialChemical FractionationBiochemistryAnalytical ChemistryMembraneLiquid–liquid extractionPhase (matter)para-AminobenzoatesSample preparation4-Aminobenzoic AcidPorosityJournal of Chromatography A
researchProduct

Determination of atranol and chloroatranol in perfumes using simultaneous derivatization and dispersive liquid-liquid microextraction followed by gas…

2013

Abstract A new analytical method based on simultaneous derivatization and dispersive liquid–liquid microextraction (DLLME) followed by gas chromatography–mass spectrometry (GC–MS), for the determination of the allergenic compounds atranol and chloroatranol in perfumes, is presented. Derivatization of the target analytes by means of acetylation with anhydride acetic in carbonate buffer was carried out. Thereby volatility and detectability were increased for improved GC–MS sensitivity. In addition, extractability by DLLME was also enhanced due to a less polar character of the solutes. A liquid–liquid extraction was performed before DLLME to clean up the sample and to obtain an aqueous sample …

Detection limitChromatographyAqueous solutionTime FactorsMolecular StructureLiquid Phase MicroextractionOsmolar ConcentrationHydrogen-Ion ConcentrationBiochemistryGas Chromatography-Mass SpectrometryAnalytical ChemistryPerfumeSolventMatrix (chemical analysis)chemistry.chemical_compoundchemistryReagentStandard additionBenzaldehydesSolventsEnvironmental ChemistryGas chromatography–mass spectrometryDerivatizationSpectroscopyAnalytica chimica acta
researchProduct

Determination of Parabens in Cosmetics without Previous Extraction by Micellar Liquid Chromatography

1999

A simple and rapid micellar liquid chromatography method for the determination of p-hydroxybenzoic acid esters (methyl-, ethyl-, n-propyl-, and n-butylparaben) in cosmetics (bath foam, milk lotion, hand cream, cream base, and shampoo) is described. The samples are solved with n-propanol, further diluted with more n-propanol or with an aqueous sodium dodecyl sulphate (SDS) micellar solution, and injected. Separations are performed with a micellar mobile phase containing 0.1M SDS, 2.5% n-propanol, 10mM phosphate (pH 3), and with an octadecyl silica column (C 18 ). Calibrations are linear (correlation coefficient r > 0.999) and the limits of detection range from 0.03 to 0.3 ng paraben. The det…

Detection limitChromatographyAqueous solutionintegumentary systemChemistryExtraction (chemistry)General MedicineMicellar electrokinetic chromatographyShampooAnalytical ChemistryParabenchemistry.chemical_compoundMicellar liquid chromatographyLotionJournal of Chromatographic Science
researchProduct

Resin and fatty-acid analysis by solid-phase extraction coupled to atmospheric pressure chemical ionization–mass spectrometry

2007

Using gas-chromatographic analysis, the suitability of liquid–liquid extraction and solid-phase extraction (SPE) methods was studied for the rapid separation of resin and fatty-acid fractions from papermaking process waters. In the second phase of this study, a novel procedure (correlation coefficient >0.99 and repeatability RSD <8%) for on-line monitoring of selected individual acid components (limits of detection 11–78 µg L−1) by SPE combined with atmospheric pressure chemical ionization–mass spectrometry was developed. The suitability of this technique for quality control of papermaking process waters was tested by means of industrial samples. The method was also found suitable for the a…

Detection limitChromatographyAtmospheric pressureChemistryHealth Toxicology and MutagenesisPapermakingExtraction (chemistry)Public Health Environmental and Occupational HealthAnalytical chemistrySoil ScienceAtmospheric-pressure chemical ionizationRepeatabilityMass spectrometryPollutionAnalytical ChemistryEnvironmental ChemistrySolid phase extractionWaste Management and DisposalWater Science and TechnologyInternational Journal of Environmental Analytical Chemistry
researchProduct

Evaluation of C18 adsorbent cartridges for sampling and derivatization of primary amines in air

2004

Abstract The sampling efficiency of C18 solid-phase extraction cartridges was investigated for methylamine, ethylamine, propylamine, butylamine and pentylamine, in air. Determination of these analytes was based on derivatization with o-phthaldialdehyde–N-acetylcysteine (OPA–NAC) on the solid support and fluorescence detection at λexcitation=330 nm and λemission=440 nm of the eluted derivatives. The calibration model derived from aqueous standards was statistically comparable with the calibration model for air standards. Aqueous amines can be used as standards. The method was useful for calculating short-term exposure limits (STEL). A sampling time of 15 min at 30 ml min−1 was employed. Good…

Detection limitChromatographyButylamineFluorescence spectrometryAnalytical chemistryPropylamineBiochemistryAnalytical ChemistryStandard curvechemistry.chemical_compoundchemistryEnvironmental ChemistrySolid phase extractionPentylamineDerivatizationSpectroscopyAnalytica Chimica Acta
researchProduct