Search results for "fabrication"
showing 10 items of 460 documents
Microreflectivity studies of wavelength control in oxidised AlGaAs microcavities
2003
Wet oxidation of GaAs/AlGaAs structures is an important technique in the processing of advanced devices such as vertical cavity surface emitting lasers (VCSELs). In one VCSEL application, the low-index and electrically-insulating AlxOy layers have been used to obtain high-reflectivity and broad bandwidth distributed Bragg reflector mirrors (DBRs). A further recent development has shown that combined lateral–vertical oxidation of intracavity AlGaAs layers can be used to tune the resonant wavelength of a semiconductor microcavity. The slow oxidation rate limits the lateral scale of practical wet oxidation to mesas structures of 50–100 μm in width. Therefore post-processing assessment of spect…
Bottom‐Up Fabrication of Semiconductive Metal-Organic Framework Ultrathin Films
2018
Though generally considered insulating, recent progress on the discovery of conductive porous metal-organic frameworks (MOFs) offers new opportunities for their integration as electroactive components in electronic devices. Compared to classical semiconductors, these metal-organic hybrids combine the crystallinity of inorganic materials with easier chemical functionalization and processability. Still, future development depends on the ability to produce high-quality films with fine control over their orientation, crystallinity, homogeneity, and thickness. Here self-assembled monolayer substrate modification and bottom-up techniques are used to produce preferentially oriented, ultrathin, con…
Recent Progress in FSMA Microactuator Developments
2009
The giant magneto-strain effect is particularly attractive for actuator applications in micro- and nanometer dimensions as it enables contact-less control of large deformations, which can hardly be achieved by other actuation principles in small space. Two different approaches are being pursued to develop ferromagnetic shape memory (FSMA) microactuators based on the magnetically induced reorientation of martensite variants: (1) the fabrication of free-standing epitaxial Ni-Mn-Ga thin film actuators in a bottom-up manner by magnetron sputtering, substrate release and integration technologies and (2) the top-down approach of thickness reduction of bulk Ni-Mn-Ga single crystals to foil specime…
In-line fiber-optic sensors based on the excitation of surface plasma modes in metal-coated tapered fibers
2001
Abstract Metal-coated tapered fibers are reported as refractive index sensors based on the resonant excitation of surface plasma modes supported by the metal coating. The devices are easy to fabricate and constitute an alternative to metal-coated side-polished fibers and to other sensors made up of bulk components. We report the fabrication and power transmission properties of quasi-circular devices and asymmetric devices. Both sets of devices can be operated as wavelength output sensors, as well as amplitude output sensors. The transmittance of quasi-circular devices is polarization independent and it changes more than 30 dB as a function of external refractive index.
An E-plane EBG waveguide for dispersion compensated transmission of short pulses
2007
The resolution of radar applications can significantly suffer from pulse broadening along the propagation in homogeneous hollow waveguides. The latter occurs due to the strongly dispersive nature of the fast waves in the waveguides. A low-cost solution to this problem is here proposed, employing an EBG type of waveguide, compatible with traditional E-plane fabrication techniques. By means of an example, here we demonstrate the reduction of the pulse spreading as it propagates along this type of waveguide.
An Electrical Tuner to Command Optical NanoAntennas
2010
Optical antennas are passive device where fabrication designs decide operating frequency, gain and emission diagram. By introducing an electrically controllable load medium for the antenna, these characteristics can be externally controlled.
Fabrication of Porous Hydrogenation Catalysts by a Selective Laser Sintering 3D Printing Technique
2019
Open in a separate window Three-dimensional selective laser sintering printing was utilized to produce porous, solid objects, in which the catalytically active component, Pd/SiO2, is attached to an easily printable supporting polypropylene framework. Physical properties of the printed objects, such as porosity, were controlled by varying the printing parameters. Structural characterization of the objects was performed by helium ion microscopy, scanning electron microscopy, and X-ray tomography, and the catalytic performance of the objects was tested in the hydrogenation of styrene, cyclohexene, and phenylacetylene. The results show that the selective laser sintering process provides an alte…
Metal-organic magnets with large coercivity and ordering temperatures up to 242°C.
2020
International audience; Magnets derived from inorganic materials (e.g., oxides, rare-earth–based, and intermetallic compounds) are key components of modern technological applications. Despite considerable success in a broad range of applications, these inorganic magnets suffer several drawbacks, including energetically expensive fabrication, limited availability of certain constituent elements, high density, and poor scope for chemical tunability. A promising design strategy for next-generation magnets relies on the versatile coordination chemistry of abundant metal ions and inexpensive organic ligands. Following this approach, we report the general, simple, and efficient synthesis of light…
Optical Amplification in Hollow-Core Negative-Curvature Fibers Doped with Perovskite CsPbBr3 Nanocrystals
2019
| openaire: EC/H2020/820423/EU//S2QUIP We report a hollow-core negative-curvature fiber (HC-NCF) optical signal amplifier fabricated by the filling of the air microchannels of the fiber with all-inorganic CsPbBr3 perovskite nanocrystals (PNCs). The optimum fabrication conditions were found to enhance the optical gain, up to +3 dB in the best device. Experimental results were approximately reproduced by a gain assisted mechanism based on the nonlinear optical properties of the PNCs, indicating that signal regeneration can be achieved under low pump powers, much below the threshold of stimulated emission. The results can pave the road of new functionalities of the HC-NCF with PNCs, such as op…
Liquid-phase alkali-doping of individual carbon nanotube field-effect transistors observed in real-time
2011
The carbon nanotube (CNT) is known to be very sensitive to changes in its surrounding environment. Our study is on the effects of mild, liquid-phase alkali-doping on electronic transport in individual CNTs. We find clear and consistent reversal from p- to n-type behavior, with all seven investigated CNT field-effect transistors (FETs) retaining a similar ON/OFF ratio and subthreshold slope. We have also measured the realtime electronic response during liquid-phase doping, and demonstrate detection of alkali cations with a signal response that ranges over more than three orders of magnitude. The doping is fully reversible upon exposure to oxygen, and the doping cycle is repeatable. We also c…