Search results for "face"
showing 10 items of 11436 documents
Special Issue: Water Management Strategies in Irrigated Areas
2016
The 2015 edition of the United Nations World Water Development Report highlighted that ‘water is at the core of sustainable development’. Water has upgraded the quality of human life, and any progress to achieve a more sustainable world will deal with the maintenance and/or the improvement of water management. Water demand has grown at more than twice the population rate in the XX century. By 2025, it is estimated that about 1.8 billion people will live in countries or regions with absolute water scarcity, and two-thirds of the world population could be under stress conditions.
Thermoplastic Properties of Endodontic Gutta-percha: A Thermographic In Vitro Study
2014
Abstract Introduction Endodontic gutta-percha undergoes deformation at temperatures above 65°C. The temperature influence of heat carriers on gutta-percha cones was investigated in vitro. Methods Six single-rooted extracted teeth were embedded in resin and fixed. The root canals were prepared (ProFile; Dentsply Maillefer, Ballaiques, Switzerland) to different tapers and bisected. Thermographic images when heating the gutta-percha cones (Roeko, Langenau, Germany) with a heat carrier (ML .12; SybronEndo, Orange, CA) at 1 and 5 mm from the working length were made with an infrared thermal imaging camera (ThermaCam P640; Flir Systems, Taby, Sweden). The device temperature was preset at 200°C. T…
Effect of high temperature annealing (T > 1650 °C) on the morphological and electrical properties of p-type implanted 4H-SiC layers
2019
This work reports on the effect of high temperature annealing on the electrical properties of p-type implanted 4H-SiC. Ion implantations of Aluminum (Al) at different energies (30-200 keV) were carried out to achieve 300 nm thick acceptor box profiles with a concentration of about 10(20) at/cm(3). The implanted samples were annealed at high temperatures (1675-1825 degrees C). Morphological analyses of the annealed samples revealed only a slight increase of the surface roughness RMS up to 1775 degrees C, while this increase becomes more significant at 1825 degrees C (RMS = 1.2 nm). Room temperature Hall measurements resulted in a hole concentration in the range 0.65-1.34 x 10(18)/cm(3) and m…
Ukrainian culture fansubbed: Challenges of amateur subtitling
2021
The research addresses the issues of rendering culture specific information in amateur subtitling from the Ukrainian into the English language. The fansubbing of proper names, culture-bound common nouns, formulaic sequences, sociolects and songs by the non-professional translators for whom English is a foreign language is the main focus of this study. Thus, the comparative analysis of the Ukrainian filmsChasing Two Hares(1961),Shadows of Forgotten Ancestors(1965) andPrayer for Hetman Mazepa(2001), and their English subtitles reveals the difficulties fansubbers may face, as well as discusses translations strategies and techniques employed. Moreover, the study delves into reasons underlying t…
Effects of tilling methods on soil penetration resistance, organic carbon and water stable aggregates in a vineyard of semiarid Mediterranean environ…
2018
Tillage, especially in semiarid Mediterranean environment, enhances the mineralization process of soil organic matter (SOM) and, in turn, decreases aggregate stability. Furthermore, continuous tillage leads to the formation of plough pan beneath the tilled layer. In the present study, we investigated the effect of an innovative self-propelled machine (spading machine, SM) for shallow tillage on SOM, water stable aggregates (WSA) and soil penetration resistance (PR). Such effects were compared to those of chisel plough (CP), rotary tiller (RT) and no tillage (NT). Each tilling method was applied up to a depth of 15 cm, whereas in NT only a brush cutter was used for weed control. Soil analyse…
Tackling Performance Challenges in Organic Photovoltaics: An Overview about Compatibilizers
2020
Organic Photovoltaics (OPVs) based on Bulk Heterojunction (BHJ) blends are a mature technology. Having started their intensive development two decades ago, their low cost, processability and flexibility rapidly funneled the interest of the scientific community, searching for new solutions to expand solar photovoltaics market and promote sustainable development. However, their robust implementation is hampered by some issues, concerning the choice of the donor/acceptor materials, the device thermal/photo-stability, and, last but not least, their morphology. Indeed, the morphological profile of BHJs has a strong impact over charge generation, collection, and recombination processes; control o…
Characterisation of the magmatic signature in gas emissions from Turrialba Volcano, Costa Rica
2014
The equilibrium composition of volcanic gases with their magma is often overprinted by interaction with a shallow hydrothermal system. Identifying the magmatic signature of volcanic gases is critical to relate their composition to properties of the magma (temperature, fO2, gas-melt segregation depth). We report measurements of the chemical composition and flux of the major gas species emitted from Turrialba Volcano during March 2013. Measurements were made of two vents in the summit region, one of which opened in 2010 and the other in 2012. We determined an average SO2 flux of 5.2 ± 1.9 kg s-1 using scanning ultraviolet spectroscopy, and molar proportions of H2O, CO2, SO2, HCl, CO and H2 ga…
The effect of macromolecular architecture of ethylene copolymers with multi-alkenylsilsesquioxane on morphological, rheological and dynamic mechanica…
2021
Abstract The influence of the degree and the way of incorporation of multi-alkenylsilsesquioxane into the polymer chain on morphological, rheological and dynamic mechanical parameters were determined. It was found that POSS incorporated into the polymer chain was located outside the crystalline structure of lamella in amorphous phase. The incorporation of POSS-6-2 as a pendant group resulted in significant increase of separation of macromolecules. The key factor in rheological and dynamic mechanical behavior of copolymers turned out to be the way of POSS incorporation into the polymer chain. The incorporation of POSS into the polymer chain as a pendant group resulted in decreased relaxation…
Nature of Interactions at the Interface of Two Water-Saturated Commercial TiO2 Polymorphs
2013
Two commercial TiO2 samples, a 100% anatase and a 100% rutile, were used for the fast field cycling NMR experiments. The results showed a different behavior between the different samples. In particular, water molecules were unbonded to the solid surface for the rutile sample, whereas they appeared to chemically interact with the surface through H-bond formation with the anatase sample. The above findings accord with the generally lower activity of rutile with respect to anatase reported in literature for photocatalytic oxidation reactions in water. The difficulty of water to interact with rutile surface, indeed, could hinder the formation of OH radicals, which are the most important oxidant…
Tetraiodoethynyl resorcinarene cavitands as multivalent halogen bond donors
2014
The first examples of iodoethynyl resorcinarene cavitands as rigid 3D halogen bond (XB) donor molecules are presented. These concave macrocycles form strong, RXB = 0.78–0.83, halogen bonds with dioxane oxygen, pyridine nitrogen and a bromide anion in tetraproropyl ammonium bromide resulting in deep cavity cavitand structures.