Search results for "fiber"
showing 10 items of 2343 documents
Fiber-based light source for biomedical applications
2013
This manuscript presents the work done concerning the development of a light source used for biomedical imaging and more particularly for coherent Raman scattering imaging. In fact an efficient broadcasting of these ones is hampered by the need of two synchronized and wavelength shifted pulses. As so, the handiness and frequency conversion capabilities of nonlinear fiber optics are used to circumvent this technological lock. First of all, an easy wavelength tunable source is set by the use of the self-shifting in optical frequency of a soliton. A study of the main fiber parameters lead to shifts of 320 to more than 500 nm which allows interesting molecular resonances imaging (≈ 1000-4000 cm…
Strengthening of Masonry Columns with BFRCM or with Steel Wires: An Experimental Study
2016
Nowadays, innovative materials are more frequently adopted for strengthening historical constructions and masonry structures. The target of these techniques is to improve the structural efficiency with retrofitting methods while having a reduced aesthetical impact. In particular, the use of basalt fiber together with a cementitious matrix emerges as a new technique. This kind of fiber is obtained by basalt rock without other components, and consequently it could be considered a natural material, compatible with masonry. Another innovative technique for strengthening masonry columns consists of applying steel wires in the correspondence of mortar joints. Both techniques have been recently pr…
Basalt Fiber Hybridization Effects on High-Performance Sisal-Reinforced Biocomposites
2022
The increasing attention given to environmental protection, largely through specific regulations on environmental impact and the recycling of materials, has led to a considerable interest of researchers in biocomposites, materials consisting of bio-based or green polymer matrixes reinforced by natural fibers. Among the various reinforcing natural fibers, sisal fibers are particularly promising for their good mechanical properties, low specific weight and wide availability on the current market. As proven in literature by various authors, the hybridization of biocomposites by synthetical fibers or different natural fibers can lead to an interesting improvement of the mechanical properties or…
Directed Assembly of Cellulose Nanocrystals in Their Native Solid-State Template of a Processed Fiber Cell Wall
2021
Funding Information: I.S. thanks The Academy of Finland (grant no. 300364) for funding this work. C.D. acknowledges funding from FAPESP (grant 13/07932‐6). P.A.P. thanks the Emil Aaltonen Foundation and Academy of Finland (grant no. 315768) for funding and ESRF for beamtime at beamline D2am (experiment 02‐01‐885). Rita Hatakka is acknowledged for her assistance with the GPC measurements. Work of M.L. was supported by the Jane and Aatos Erkko Foundation. The work is a part of the FinnCERES Bioeconomy ecosystem. Publisher Copyright: © 2021 The Authors. Macromolecular Rapid Communications published by Wiley-VCH GmbH Copyright: Copyright 2021 Elsevier B.V., All rights reserved. Nanoparticle ass…
New Polylactic Acid Composites Reinforced with Artichoke Fibers
2015
In this work, artichoke fibers were used for the first time to prepare poly(lactic acid) (PLA)-based biocomposites. In particular, two PLA/artichoke composites with the same fiber loading (10% w/w) were prepared by the film-stacking method: the first one (UNID) reinforced with unidirectional long artichoke fibers, the second one (RANDOM) reinforced by randomly-oriented long artichoke fibers. Both composites were mechanically characterized in tensile mode by quasi-static and dynamic mechanical tests. The morphology of the fracture surfaces was analyzed through scanning electron microscopy (SEM). Moreover, a theoretical model, i.e., Hill's method, was used to fit the experimental Young's modu…
Strength of cellulosic fiber/starch acetate composites with variable fiber and plasticizer content
2014
In this experimental study, the performance of injection-molded short flax and hemp fibers in plasticized starch acetate were analyzed in terms of strength. Parameters involved in the analysis are a variable fiber and plasticizer content. The measured strength of the composites varies in the range of 12–51 MPa for flax fibers and 11–42 MPa for hemp fibers, which is significantly higher than the properties of the unreinforced starch acetate matrix. The micro-structural parameters used in modeling of composite strength were obtained from optical observations and indirect measurements. Some of these parameters were qualitatively verified by X-ray microtomography.
Creep Behavior of Poly(lactic acid) Based Biocomposites
2017
Polymer composites containing natural fibers are receiving growing attention as possible alternatives for composites containing synthetic fibers. The use of biodegradable matrices obtained from renewable sources in replacement for synthetic ones is also increasing. However, only limited information is available about the creep behavior of the obtained composites. In this work, the tensile creep behavior of PLA based composites, containing flax and jute twill weave woven fabrics, produced through compression molding, was investigated. Tensile creep tests were performed at different temperatures (i.e., 40 and 60 °C). The results showed that the creep behavior of the composites is strongly inf…
Effect of Tire-Char Ash on the Extent of Synergy during CO2 Cogasification with Hydrochar from Potassium-Rich Coconut Fiber
2020
The influence of inherent tire char ash during co-gasification with coconut hydrochar prepared at different intensities was investigated by thermogravimetric analysis to ascertain the extent to which synergistic interaction, reactivity, and activation energy reduction were altered. High-ash tire tread (TT) and low-ash sidewall (SW) both exhibited enhanced synergy, reactivity, and activation reduction upon co-gasification with hydrochars; however, the extent of promotion was more pronounced in SW-hydrochar blends. This difference was caused by the inhibiting nature of TT inherent ash, particularly the role of Si-containing compounds. Inhibition in TT-hydrochar blends was mainly due to the pr…
Characteristics of cellulose fibers from Opuntia ficus indica cladodes and its use as reinforcement for PET based composites
2021
With the aim of valorizing the unexplored Moroccan resources, Opuntia ficus indica (OFI) cladodes were proposed as a renewable source for the production of cellulose. In this work, cellulose microf...
Progress in Paper Physics Seminar : Abstract book of the PPPS2020 seminar September 1-3, 2020 in Jyväskylä, Finland
2020
The scope of the Progress in Paper Physics Seminar is to discuss the broad scope of physical properties of paper, paperboard and new cellulose containing materialas. The program contain presentations reporting on the latest experimental, theoretical and computational developments. The three invited plenary speakers aim at bringing industry and academia together for in-depth discussions on selected topics in paper physics the potential impact on industry. The selected 37 oral presentations and 12 poster presentations provide opportunity to improve scientific knowledge and explore the latest outcomes and trends in the field. nonPeerReviewed