Search results for "finite element analysis"
showing 10 items of 98 documents
A Numerical Study on Interlaminar Defects Characterization in Fibre Metal Laminates with Flying Laser Spot Thermography
2018
This work describes a numerical study on non-destructive evaluation of interlayer disbond defects in aerospace grade Fibre Metal Laminate sheets (FMLs). A recently proposed infrared non-destructive testing setup is considered, where a continuous laser is moved over the material surface, while the thermal footprint of the moving heat source is acquired, e.g. by an infrared thermal camera. Interlayer disbonds are then detected by analysing the features of the acquired thermograms. The experimental feasibility of this approach has been recently proved. The present work proposes a numerical simulation of the NDT approach, where the material thermal response is analysed and correlated to defects…
Inclusion of the periodontal ligament in studies on the biomechanical behavior of fiber post-retained restorations: An in vitro study and three-dimen…
2016
Endodontically treated teeth are known to have reduced structural strength. Periodontal ligament may influence fracture resistance. The purpose of this study was to assess the influence of including the periodontal ligament in biomechanical studies about endodontically treated and restored teeth. Forty human maxillary central incisors were treated endodontically and randomly divided into four groups: non-crowned (with and without an artificial ligament) and crowned (with and without an artificial ligament) with glass-ceramic crowns. All groups received prefabricated glass-fiber posts and a composite resin core. Specimens were tested, under a flexural–compressive load, until failure occurre…
A simulation and experimental study of electrochemical pH control at gold interdigitated electrode arrays
2021
Abstract In electroanalysis, solution pH is a critical parameter that often needs to be tailored and controlled for the detection of particular analytes. This is most commonly performed by the addition of chemicals, such as strong acids or bases. Electrochemical in-situ pH control offers the possibility for the local adjustment of pH at the point of detection, without the need for additional reagents. Finite element analysis (FEA) simulations have been performed on interdigitated electrodes, to guide experimental design in relation to both electroanalysis and in-situ control of solution pH. No previous model exists that describes the generation of protons at an interdigitated electrode arra…
Experimental and numerical analysis of aluminum-aluminum bolted joints subject to an indentation process
2015
Abstract The increasing interest of the industry (especially automotive, aviation and marine) in the fastener joints (riveted, bolted, etc.) between metallic materials, has re-opened the study on the possibility to improve the performance of the drilled structure using plastic deformation processes. Indentation process, performed before the drilling operation, creates circumferential compression stresses around the hole which increase significantly the mechanical performance of the drilled structures. In this paper, static and the fatigue performances of aluminum–aluminum (AW 6082-T6) single-lap bolted joints are studied. In particular, the study compares the mechanical strength of only dri…
Rapid evaluation of notch stress intensity factors using the peak stress method: Comparison of commercial finite element codes for a range of mesh pa…
2018
The peak stress method (PSM) is an engineering, finite element (FE)-oriented method to rapidly estimate the notch stress intensity factors by using the singular linear elastic peak stresses calculated from coarse FE analyses. The average element size adopted to generate the mesh pattern can be chosen arbitrarily within a given range. Originally, the PSM has been calibrated under pure mode I and pure mode II loadings by means of Ansys FE software. In the present contribution, a round robin between 10 Italian universities has been carried out to calibrate the PSM with 7 different commercial FE codes. To this aim, several two-dimensional mode I and mode II problems have been analysed independe…
A study on stress distribution to cement layer and root dentin for post and cores made of CAD/CAM materials with different elasticity modulus in the …
2019
Background To evaluate the stress distribution in a maxillary central incisor with different post and cores made of six CAD/CAM materials with different elastic modulus in the absence of ferrule using the finite element analysis. Material and methods A three-dimensional endodontically treated maxillary central incisor restored with an all-ceramic crown was modelled in Rhinoceros (5.0 SR8, McNeel). The geometries were analyzed in ANSYS 17.2 (ANSYS Inc.) considering isotropic, homogeneous, linearly elastic materials with perfectly bonded contacts. The elastic moduli (E) of the post-and-cores defined the groups to be compared: nanoceramic resin (E=12.8GPa); composite resin (E=16GPa); hybrid ce…
Influence of different restorative materials on the stress distribution in dental implants
2018
Background To assist clinicians in deciding the most suitable restorative materials to be used in the crowns and abutment in implant rehabilitation. Material and methods For finite element analysis (FEA), a regular morse taper implant was created using a computer aided design software. The implant was inserted at the bone model with 3 mm of exposed threads. An anatomic prosthesis representing a first maxillary molar was modeled and cemented on the solid abutment. Considering the crown material (zirconia, chromium-cobalt, lithium disilicate and hybrid ceramic) and abutment (Titanium and zirconia), the geometries were multiplied, totaling eight groups. In order to perform the static analysis,…
Evaluation of Subgrade Resilient Modulus Predictive Model for Use in Mechanistic-Empirical Pavement Design Guide
2006
The characterization of unbound materials in the mechanistic–empirical pavement design guide (MEPDG), also known as the 2002 design guide, is reviewed, and this characterization is applied to Minnesota subgrades. The main emphasis is on the collection of k1-, k2-, and k3-parameters for Minnesota fine-grained soils and the procedure for the interpretation of the resilient modulus test to provide an input to the multilayer elastic theory (MLET) analysis (Level 2 input). This is an important aspect of adaptation of the MEPDG, because the guide recommends measurement of resilient moduli from laboratory testing, but the procedure does not specify how to interpret the test data to obtain an input …
Heterogeneous structures studied by an interphase elasto-plastic damaging model
2013
Heterogeneous materials present a mechanical response strongly dependent on the static and kinematic phenomena occurring in the constituents and at their joints. At the mesoscopic level the interaction between the units is simulated by mean of apposite mechanical devices such as the zero thickness interface model where contact tractions and displacement discontinuities are the primary static and kinematic variables respectively. In heterogeneous materials the response also depends on joint internal stresses. The introduction of internal stresses brings to the interphase model or an enhancement of the classical zero-thickness interface. With the term 'interphase' we shall mean a layer separa…
Effect of clenching on biomechanical response of human mandible and temporomandibular joint to traumatic force analyzed by finite element method
2013
Purpose: The purpose of the present study was to analyze the effect of clenching on the biomechanical response of human mandible and temporomandibular joint (TMJ) to traumatic force by the finite element (FE) method. Material and Methods: FE models of the mandible and the TMJ in resting and clenching positions were prepared. Distribution and magnitude of von Mises stress were analyzed by applying force as a point load in the symphyseal, canine, body and angle regions of the mandible. In addition, strain energy density (SED) at the articular disc and in posterior connective tissue of TMJ was analyzed. Results: In the resting position, von Mises stress was mainly concentrated at the condylar …