Search results for "hate"
showing 10 items of 2099 documents
Highly activated screen-printed carbon electrodes by electrochemical treatment with hydrogen peroxide
2018
An easy effective method for the activation of commercial screen-printed carbon electrodes (SPCEs) using H2O2 is presented to enhance sensing performances of carbon ink. Electrochemical activation consists of 25 repetitive voltammetric cycles at 10 mV s−1 using 10 mM H2O2 in phosphate buffer (pH 7). This treatment allowed us to reach a sensitivity of 0.24 ± 0.01 μA μM−1 cm−2 for the electroanalysis of H2O2, which is 140-fold higher than that of untreated SPCEs and 6-fold more than screen-printed platinum electrodes (SPPtEs). Electrode surface properties were characterized by SEM, EIS and XPS. The results revealed atomic level changes at the electrode surface, with the introduction of new ca…
Resistance of bonded premolars to four artificial ageing models post enamel conditioning with a novel calcium-phosphate paste
2020
Background This in vitro study compares a novel calcium-phosphate etchant paste to conventional 37% phosphoric acid gel for bonding metal and ceramic brackets by evaluating the shear bond strength, remnant adhesive and enamel damage following water storage, acid challenge and fatigue loading. Material and Methods Metal and ceramic brackets were bonded to 240 extracted human premolars using two enamel conditioning protocols: conventional 37% phosphoric acid (PA) gel (control), and an acidic calcium-phosphate (CaP) paste. The CaP paste was prepared from β-tricalcium phosphate and monocalcium phosphate monohydrate powders mixed with 37% phosphoric acid solution, and the resulting phase was con…
Iron and lithium-iron alkyl phosphates as nanostructured material for rechargeable batteries
2018
Abstract Inorganic/organic hybrid materials composed by iron atoms bonded to an alkyl phosphate can be easily synthesized by mixing at 110 °C iron chlorides with tri-alkyl phosphates. Since structural information on these products are lacking and taking into account that lithium/iron organic hybrid materials are important in lithium ion battery technology we report here the physico-chemical characterization of different hybrid lithium/iron butylphosphates. These materials are characterized by the presence of elongated hexagonal crystals stable up to 315 °C. The insertion of lithium does not affect the local structure. Thanks to such structures the material can be electrochemically-cycled an…
Syntheses, crystal structures, and solid state NMR investigations of K4M2P6S25 and K3M2P5S18 (M=Ti, Sn)
2002
Abstract Reaction of K 2 S 5 with P 4 S 10 and Ti at 450 °C results in the formation of K 4 Ti 2 P 6 S 25 , a new titanium thiophosphate, whose crystal structure was solved by single-crystal X-ray diffraction. The title compound crystallizes in the orthorhombic space group Fdd2, with the lattice constants a =33.819(7), b =35.508(7), and c =6.251(1) A ( Z =8). The structure contains a layered arrangement of crosslinked quasi-one-dimensional Ti 2 P 6 S 4− 25 chains. The K + ions are situated between the layers. The Ti atoms within the chains are octahedrally coordinated by P 2 S 4− 7 and P 2 S 4− 9 ligands. Reaction of K 2 S with P 4 S 10 , S and Ti at 600 °C results in the formation of K 3 T…
Proton-conducting zirconium phosphate/poly(vinyl acetate)/glycerine gel electrolytes
2003
This work reports on a proton gel electrolyte composed of zirconium phosphate (ZP) particles suspended in a poly(vinyl acetate)/glycerine matrix. The material was studied by X-ray powder diffraction, differential scanning calorimetry, impedance spectroscopy, and spectrophotometry. It had a proton conductivity of 1–0.1 mS/cm at room temperature and remained stable and transparent up to at least 110 °C; it therefore appears suitable for uses in electrochromic devices. The structure of the ZP powder and of the gel is discussed in terms of water removal from interplanar spaces by heating or exfoliation. It is suggested that an exfoliation of the layered structure of ZP by intercalation of glyce…
Reaction pathways for atomic layer deposition with lithium hexamethyl disilazide, trimethyl phosphate, and oxygen plasma
2020
Atomic layer deposition (ALD) of lithium-containing films is of interest for the development of next-generation energy storage devices. Lithium hexamethyl disilazide (LiHMDS) is an established precursor to grow these types of films. The LiHMDS molecule can either be used as a single-source precursor molecule for lithium or as a dual-source precursor molecule for lithium and silicon. Single-source behavior of LiHMDS is observed in the deposition process with trimethylphosphate (TMP) resulting in the deposition of crystalline lithium phosphate (Li3PO4). In contrast, LiHMDS exhibits dual-source behavior when combined with O2 plasma, resulting in a lithium silicate. Both processes were characte…
Production and Characterization of Oxyhydroxyapatites
2018
The amount and alignment of hydroxyl ions influence the bioactivity of hydroxyapatite. Hydroxyl ions in hydroxyapatite are the most mobile and upon heating are the first to leave the lattice to form oxyhydroxyapatite. This work describes a method for producing hydroxyapatite with different amounts of hydroxyl ions, and reports on the changes in Fourier transform infrared absorption at increasing level of dehydroxylation. Detailed analysis of spectra in the 500 – 700 cm-1 range showed a peak shift for the hydroxyl ion absorption line at 632 cm-1 to 637 cm-1 and an increase in the wavenumber for the phosphate line at 575 cm-1.
Corrosion protection of Nd–Fe–B type permanent magnets by zinc phosphate surface conversion coatings
2001
Abstract The use of protective zinc phosphate top coatings to protect Nd–Fe–B type permanent magnets against corrosion is discussed. The progress of the phosphatisation process has been tested by simultaneous measurement of pH near surface, corrosion potential, substrate mass loss and phosphate coating mass gain. The corrosion behaviour of the magnet in phosphate solution was analyzed by the anodic polarization technique and the general resistance of the magnet to corrosion was evaluated by the Akimov drop test. It is shown that immersion of the magnet in the acidified (pH=2) phosphating solution containing Zn(II), nitrate and fluoride ions resulted in the formation of well adhered, thin an…
Preparation and structural study of sodium germanium phosphate-sodium titanium phosphate solid solutions. I. Evolution of structure with composition
1993
Compounds NaM2IV(PO4)3 with M = Ge, Ti present the [NZP]-type structure, with a low thermal expansion. The space group at room temperature for the compound NaGe2(PO4)3 is R3, whereas for the compound NaTi2(PO4)3 is R3c. Evolution of the structure with composition in NaGe2(PO4)3 NaTi2(PO4)3 system is discussed. The space group and lattice parameters were determined for NaGe2−xTix(PO4)3 (0 < x < 2) solid solutions, prepared by ceramic method. Compositions rich in Ge(IV) (0 ≤ x ≤ 1) show the R3 space group, whereas for those rich in Ti(IV) (1.2 ≤ x ≤ 2) the space group is R3c. The variation of the lattice parameters with composition agreed with these results since it showed a change in its t…
Charge State of Silver Halide Colloids Determines the Antibacterial Activity in Amorphous Calcium Phosphate
2013
Removal of bacteria is important not only at implantation, but after long-term implant/prosthesis use. This requires strategies that employ different approaches for combating bacteria. Halides have the potential of an additional mechanism, and together with silver may provide a more powerful antibacterial strategy. Silver iodide was synthesized as colloids with a positive and negative charge and incorporated into an amorphous calcium phosphate (ACP) to provide a possible greater antibacterial action. Colloids were characterized by FTIR spectroscopy and the charge measured by zeta potential. Phase analysis by X-ray diffraction patterns confirmed the formation of b-AgI nanoparticles. Minimum …