Search results for "lcsh:Technology"
showing 10 items of 550 documents
Estimating brain load from the EEG.
2009
Modern work requires cognitively demanding multitasking and the need for sustained vigilance, which may result in work-related stress and may increase the possibility of human error. Objective methods for estimating cognitive overload and mental fatigue of the brain on-line, during work performance, are needed. We present a two-channel electroencephalography (EEG)–based index, theta Fz/alpha Pz ratio, potentially implementable into a compact wearable device. The index reacts to both acute external and cumulative internal load. The index increased with the number of tasks to be performed concurrently (p= 0.004) and with increased time awake, both after normal sleep (p= 0.002) and sleep restr…
Suitability of some existing damage indexes for assessing agreements in maintenance and management of museum climatization systems
2020
Heating, Ventilating and Air-Conditioning systems in museums are called to properly control important microclimate parameters, not only for visitors’ wellbeing, but mostly for the preservation of works of art. Accordingly, in case of interruptions to Heating, Ventilating and Air-Conditioning systems, due to maintenance interventions or drawbacks, it is essential to guarantee the acceptable break from service to which possible damages for the works of art are related. In this regard, the aim of this work is to introduce a simple indicator to support curators in regulating the stipulation of contracts with external companies, a more effective management and maintenance of the Heating, V…
An integrated environmental indicator for urban transportation systems: description and application
2015
A simplified version of the ecological footprint method is proposed for assessing the environmental performances of urban transportation systems. The method, starting from the knowledge of the composition of the running vehicular fleet, is here applied to a southern Italian province. It represents a synthetic indicator of the environmental pressure exerted by the system also matching the pollutant emissions with the carrying capacity of the site. Particularly, the forested area needed to absorb the CO2 emissions of the system is compared with the total forested area of the province. The results of the case-study indicates the yearly maximum distance that each vehicle of the fleet can cover …
Reexamining Different Factors of the Resonance-Enhanced High-Order Harmonic Generation in Atomic and Nanoparticle Laser-Induced Tin Plasmas
2021
We reexamine the resonance enhancement of a single harmonic emission during the propagation of ultrafast pulses through atomic and nanoparticle tin-containing laser-induced plasma (LIP). We compare the single atomic Sn and Sn nanoparticle plasmas to demonstrate a distinction in the enhancement factor of the single harmonic in the case of fixed and tunable near-infrared pulses. The analysis of the dynamics of Sn LIP shows the range of optimal delays between heating and driving pulses (130–180 ns), at which the maximal harmonic yield can be achieved. The enhancements of the 17th and 18th harmonics of 806 nm pulses were analyzed in the case of single-color and two-color pumps of LIP, showing u…
Gas Barrier, Rheological and Mechanical Properties of Immiscible Natural Rubber/Acrylonitrile Butadiene Rubber/Organoclay (NR/NBR/Organoclay) Blend N…
2020
In this paper, gas permeability studies were performed on materials based on natural rubber/acrylonitrile butadiene rubber blends and nanoclay incorporated blend systems. The properties of natural rubber (NR)/nitrile rubber (NBR)/nanoclay nanocomposites, with a particular focus on gas permeability, are presented. The measurements of the barrier properties were assessed using two different gases—O2 and CO2—by taking in account the blend composition, the filler loading and the nature of the gas molecules. The obtained data showed that the permeability of gas transport was strongly affected by: (i) the blend composition—it was observed that the increase in acrylonitrile butadiene rubber compon…
“Compatibilization” through Elongational Flow Processing of LDPE/PA6 Blends
2018
Polyamide/polyolefin blends have gained attention from the academia and the industry for several years. However, in order to optimize their properties, some drawbacks such as chemical incompatibility must be adequately overcome. This can be done by adding suitable compatibilizers. On the other hand, it is less known that suitable processing techniques may also lead to significant results. In a previous work on a low-density polyethylene/polyamide 6 (LDPE/PA6) blend, we found that the orientation due to elongational flow processing conditions could lead to an unexpected brittle&ndash
On the Phase Separation in n-Type Thermoelectric Half-Heusler Materials
2018
Half-Heusler compounds have been in focus as potential materials for thermoelectric energy conversion in the mid-temperature range, e.g., as in automotive or industrial waste heat recovery, for more than ten years now. Because of their mechanical and thermal stability, these compounds are advantageous for common thermoelectric materials such as Bi 2 Te 3 , SiGe, clathrates or filled skutterudites. A further advantage lies in the tunability of Heusler compounds, allowing one to avoid expensive and toxic elements. Half-Heusler compounds usually exhibit a high electrical conductivity σ , resulting in high power factors. The main drawback of half-Heusler compounds is their high lattice th…
Deformation and failure of MXene nanosheets
2020
This work is aimed at the development of finite element models and prediction of the mechanical behavior of MXene nanosheets. Using LS-Dyna Explicit software, a finite element model was designed to simulate the nanoindentation process of a two-dimensional MXene Ti3C2Tz monolayer flake and to validate the material model. For the evaluation of the adhesive strength of the free-standing Ti3C2Tz-based film, the model comprised single-layered MXene nanosheets with a specific number of individual flakes, and the reverse engineering method with a curve fitting approach was used. The interlaminar shear strength, in-plane stiffness, and shear energy release rate of MXene film were predicted using th…
Influence of Glass Additions on Illitic Clay Ceramics
2020
A mixture of an illitic clay and waste glass was prepared and studied during the sintering process. The illitic clay, from the Liepa deposit (Latvia), and green glass waste (GW) were disintegrated to obtain a homogeneous mixture. The addition of disintegrated GW (5&ndash
Characterization of Different Cable Ferrite Materials to Reduce the Electromagnetic Noise in the 2–150 kHz Frequency Range
2018
The gap of standardization for conducted and field coupled electromagnetic interferences (EMI) in the 2–150 kHz frequency range can lead to Electromagnetic Compatibility (EMC) problems. This is caused by power systems such as Pulse Width Modulation (PWM) controlled rectifiers, photovoltaic inverters or charging battery units in electric vehicles. This is a very important frequency spectral due to interferences generated in a wide range of devices and, specifically, communication problems in the new technologies and devices incorporated to the traditional grid to convert it into a Smart Grid. Consequently, it is necessary to provide new solutions to attenuate this kind of interference, which…