Search results for "methacrylic acid"
showing 10 items of 71 documents
Rapid determination of sterols in vegetable oils by CEC using methacrylate ester-based monolithic columns
2008
A method for the determination of sterols in vegetable oils by CEC with UV-Vis detection, using methacrylate ester-based monolithic columns, has been developed. To prepare the columns, polymerization mixtures containing monomers of different hydrophobicities were tried. The influence of composition of polymerization mixture was optimized in terms of porogenic solvent, monomers/porogens and monomer/crosslinker ratios. The composition of the mobile phase was also studied. The optimum monolith was obtained with lauryl methacrylate monomer at 60:40% (wt:wt) lauryl methacrylate/ethylene dimethacrylate ratio and 60 wt% porogens with 20 wt% of 1,4-butanediol (12 wt% 1,4-butanediol in the polymeriz…
Influence of photo-initiators in the preparation of methacrylate monoliths into poly(ethylene-co-tetrafluoroethylene) tubing for microbore HPLC.
2020
[EN] In this study, poly(butyl methacrylate-co-ethyleneglycol dimethacrylate) polymeric monoliths were in situ developed within 0.75 mm i.d. poly(ethylene-co-tetrafluoroethylene) (ETFE) tubing by UV polymerization via three different free-radical initiators fscce-azobisisobutyronitrile (AIBN), 2,2-dimethoxy-2-phenylacetophenone (DMPA) and 2-methyl-4'-(methylthio)-2-morpholinopropiophenone (MTMPP). The influence of the nature of each photo-initiator and irradiation time on the morphological features of the polymer was investigated by scanning electron microscopy, and the chromatographic properties of the resulting microbore columns were evaluated using alkyl benzenes as test substances. The …
Treatment of poly(styrene-co-methacrylic acid)/poly(4-vinylpyridine) blends in solution under liquid–liquid phase-separation conditions. A new method…
2006
Phase diagrams are contributed for polymer mixture systems in solution. One polymer has proton-acceptor character and the other has growing proton-donor nature, which is reflected in the phase diagrams. Usually, these diagrams are obtained from size-exclusion chromatographic (SEC) measurements. A totally novel application, which is exposed in this report, is the construction of the phase diagram from the viscometric experiments of polymer mixtures. The evaluated binodal or cloud-point isotherms so built agree well with those from SEC. The results indicate an augmentation in the dimensions of donor polymer B, in the presence of acceptor polymer C, intensifying with the concentration of C, wh…
Hybrid methacrylate monolithic columns containing magnetic nanoparticles for capillary electrochromatography
2015
Abstract Vinylized iron oxide magnetic nanoparticles (VMNPs) were incorporated into polymethacrylate monolithic columns to develop novel stationary phases with enhanced separation performance. The VMNPs were dispersed in a polymerization mixture containing gycidyl methacrylate and ethylene glycol dimethacrylate as monomers, cyclohexanol and 1-dodecanol as porogens and azobisisobutyronitrile as initiator. The stability of the VMNPs in the polymerization mixture was investigated at several VMNP contents. Using short UV-polymerization times, polymeric beds with homogenously dispersed VMNPs were obtained. The novel stationary phases were characterized by scanning electron microscopy. The chroma…
Modelling retention and peak shape of small polar solutes analysed by nano-HPLC using methacrylate-based monolithic columns.
2019
Abstract The development of methacrylate-based monolithic columns was studied for the separation of pharmaceutical hydrophilic compounds in nano-liquid chromatography. The selected polymerisation mixture consisted of 7.5% hexyl methacrylate, 4.5% methacrylic acid and 18.0% ethylene dimethacrylate (w/w), in a binary porogenic solvent (35:35 w/w 1-propanol/1,4-butanediol). The polymer synthesised with this mixture has a good permeability, not excessive back-pressure, and reasonable retention times for polar and non-polar solutes. Monolithic columns (12 cm total capillary length, 100 μm i.d.), prepared with this mixture, were able to produce hydrogen bonding and electrostatic interactions, giv…
Imprinted Polymers for Selective Adsorption of Cholesterol from Gastrointestinal Fluids
1998
A series of highly cross-linked terpolymers of methacryloylated cholesterol or bile acid methyl esters, methacrylic acid, and ethyleneglycol dimethacrylate were prepared in the presence or absence ...
Method for Synthesis and Screening of Large Groups of Molecularly Imprinted Polymers
2011
A technique for the synthesis of molecularly imprinted polymers (MIPs) in small scale (∼55 mg) coupled with direct in situ processing and batch rebinding evaluation is reported. The primary assessment is based on quantification by HPLC or UV absorbance measurement of the amount of template released from the polymer in a given solvent. This method allows a rapid screening of the parameters of importance to reach a desired level of binding affinity capacity and selectivity for a given target molecule. This was demonstrated for the triazine herbicide terbutylazine, where an initial screening was performed for the type of functional monomer used in the MIP preparation. Thus among the six functi…
Vapor-phase testing of the memory-effects in benzene- and toluene-imprinted polymers conditioned at elevated temperature.
2013
Abstract The preparation of polymers imprinted with common aromatic solvents such as benzene and toluene is an under-exploited subject of research. The present study was aimed at the understanding of whether true solvent memory effects can be achieved by molecular imprinting, as well as if they are stable at elevated temperature. A set of copolymers, comprising low and high cross-linking levels, was prepared from four different combinations of functional monomer and cross-linker, namely methacrylic acid (MAA)/ethylene glycol dimethacrylate (EGDMA), methyl methacrylate (MMA)/EGDMA, MAA/divinyl benzene (DVB) and MMA/DVB. Each possible combination was prepared separately in benzene, toluene an…
A Deeper Insight into the Postpolymerization Modification of Polypenta Fluorophenyl Methacrylates to Poly(N -(2-Hydroxypropyl) Methacrylamide)
2014
This work provides a detailed insight into the synthesis of N-(2-hydroxypropyl)methacrylamide (HPMA) polymers employing the activated ester approach. In this approach, polypenta fluorophenyl methacrylate (PFPMA)-activated ester polymers are synthesized by the reversible addition-fragmentation chain transfer (RAFT) polymerization and transferred into HPMA-based systems by the use of 2-hydroxypropylamine. To prove quantitative conversion in the absence of side reactions, special attention is devoted to investigate different reaction conditions by different analytical methods ((1) H, (19) F, inverse-gated (13) C NMR, and zeta potential measurements). Furthermore the influence of common solvent…
Molecularly imprinted composite materials via iniferter-modified supports
2002
Wide pore silica (DP = 100 nm) and gel-type or macroporous (12% nominal crosslinking density) Merrifield resins were modified with iniferter groups for grafting of crosslinked molecularly imprinted or non-imprinted polymer layers through quasi-living polymerisation. Prior to iniferter coupling, the silica supports were premodified by silanisation with p-(chloromethyl)phenyl trimethoxysilane. The iniferter groups were then introduced by reacting the resin-bound chloromethyl groups with sodium N,N-diethyldithiocarbamate. It was shown that the coupling yield, measured as the conversion of the chloromethyl groups, could be varied between 5 and 85% through kinetic control, with the fastest conve…