Search results for "microstrip"
showing 10 items of 46 documents
The COMPASS experiment at CERN
2007
The COMPASS experiment makes use of the CERN SPS high-intensitymuon and hadron beams for the investigation of the nucleon spin structure and the spectroscopy of hadrons. One or more outgoing particles are detected in coincidence with the incoming muon or hadron. A large polarized target inside a superconducting solenoid is used for the measurements with the muon beam. Outgoing particles are detected by a two-stage, large angle and large momentum range spectrometer. The setup is built using several types of tracking detectors, according to the expected incident rate, required space resolution and the solid angle to be covered. Particle identification is achieved using a RICH counter and both…
Search for flavor-changing neutral current and lepton-flavor violating decays of D-0 -> l(+)l(-)
2004
We report on a search for the flavor-changing neutral current decays $\Dz\to e^+e^-$ and $\Dz\to\mu^+\mu^-$, and the lepton-flavor violating decay $\Dz\to e^\pm\mu^\mp$. The measurement is based on $122 {fb}^{-1}$ of data collected by the \babar detector at the PEP-II asymmetric $e^+e^-$ collider. No evidence is found for any of the decays. The upper limits on the branching fractions, at the 90 % confidence level, are $1.2\times 10^{-6}$ for $\Dz\to e^+e^-$, $1.3\times 10^{-6}$ for $\Dz\to\mu^+\mu^-$, and $8.1\times 10^{-7}$ for $\Dz\to e^\pm\mu^\mp$.
Minimization of a rectangular patch using genetic algorithms
2002
In recent years, the miniaturization of antennas have become more and more important, especially in connection with subscriber transceivers for cellular systems. Due to the multiple scattering environments and the almost indefinable operating scenario, the crosspolarization characteristics of the antenna are less important, however its physical size is critical. The attempts to reduce the physical size of the antenna made in the past, used classical methods, such as embedding the antenna in a dielectric medium of a high permittivity, adding a resistive element in series with the antenna, etc., but little effort was invested in simply generating other geometries, which by their intrinsic pro…
Miniaturization of rectangular microstrip patches using genetic algorithms
2002
This paper presents a new procedure for the miniaturization of rectangular microstrip patches based on genetic algorithms. The shape of a typical rectangular patch is modified in order to reduce its resonance frequency keeping the physical volume of the antenna constant. As an example, the resonance frequency of a square microstrip patch is reduced from 3 to 1.8 GHz. The patch is divided in 9/spl times/9 square cells. The genetic algorithm optimization procedure is subsequently used to remove some of the metallic cells. To validate the procedure an antenna prototype has been fabricated and tested. Good agreement is obtained between theoretical and experimental results.
Microwave signature for gas sensing: 2005 to present
2015
Abstract We present here the development and the implementation of a technique of gas detection involving a microwave transduction method. The use of low-cost sensors based on microstrip or coplanar structures, adapted to the microwaves domain, allows the sensitive materials deposition under various forms. The purpose of the study is to assess the interest of microwave transduction for gas detection. The choice of the sensitive materials concerns materials widely used in the field of gas sensing: the metal oxides (SnO2 and TiO2) as well as molecular materials like cobalt phthalocyanine (CoPc). In this article we shall apply to explain the principles of the microwave transduction before appr…
A study of the material in the ATLAS inner detector using secondary hadronic interactions
2011
The ATLAS inner detector is used to reconstruct secondary vertices due to hadronic interactions of primary collision products, so probing the location and amount of material in the inner region of ATLAS. Data collected in 7 TeV pp collisions at the LHC, with a minimum bias trigger, are used for comparisons with simulated events. The reconstructed secondary vertices have spatial resolutions ranging from ~ 200μm to 1 mm. The overall material description in the simulation is validated to within an experimental uncertainty of about 7%. This will lead to a better understanding of the reconstruction of various objects such as tracks, leptons, jets, and missing transverse momentum.
Beam test measurements of Low Gain Avalanche Detector single pads and arrays for the ATLAS High Granularity Timing Detector
2018
For the high luminosity upgrade of the LHC at CERN, ATLAS is considering the addition of a High Granularity Timing Detector (HGTD) in front of the end cap and forward calorimeters at |z|= 3.5 m and covering the region 2.4 <|η|< 4 to help reducing the effect of pile-up. The chosen sensors are arrays of 50 μm thin Low Gain Avalanche Detectors (LGAD). This paper presents results on single LGAD sensors with a surface area of 1.3×1.3 mm2 and arrays with 2×2 pads with a surface area of 2×2 mm2 or 3×3 mm2 each and different implant doses of the p+ multiplication layer. They are obtained from data collected during a beam test campaign in autumn 2016 with a pion beam of 120 GeV energy at the CERN SP…
Commissioning the ATLAS silicon microstrip tracker
2009
Abstract The completed SemiConductor Tracker (SCT) has been installed inside ATLAS. Quick tests were performed last year to verify the connectivity of the electrical and optical services. Problems observed with the heaters for the evaporative cooling system have been resolved. This has enabled extended operation of the full detector under realistic conditions. Calibration data has been taken and analyzed to determine the noise performance of the system. In addition, extensive commissioning with cosmic ray events has started. The cosmic muon data has been used to align the detector, to check the timing of the front-end electronics as well as to measure the hit efficiency of modules. The curr…
A comparison of the performance of irradiated p-in-n and n-in-n silicon microstrip detectors read out with fast binary electronics
2000
Abstract Both n-strip on n-bulk and p-strip on n-bulk silicon microstrip detectors have been irradiated at the CERN PS to a fluence of 3×10 14 p cm −2 and their post-irradiation performance compared using fast binary readout electronics. Results are presented for test beam measurements of the efficiency and resolution as a function of bias voltage made at the CERN SPS, and for noise measurements giving detector strip quality. The detectors come from four different manufacturers and were made as prototypes for the SemiConductor Tracker of the ATLAS experiment at the CERN LHC.
Silicon microstrip detectors for the ATLAS SCT
2002
Abstract The ATLAS Semiconductor Tracker at the Large Hadron Collider (LHC) will incorporate ∼20,000 individual silicon microstrip sensors representing ∼60 m 2 of silicon. Production and delivery of the sensors is already underway and scheduled for completion by late 2002. The sensors have been optimised for operation in the harsh radiation environment of the LHC, and subjected to an extensive qualification program in which their pre- and post-irradiation characteristics have been evaluated. The sensor design features are reviewed, together with their electrical characteristics and the Quality Control procedures adopted by ATLAS during production.