Search results for "nanoparticle"
showing 10 items of 2198 documents
Float glass colouring by ion exchange
2008
Abstract Back in the Middle Ages, glass artists used to produce yellowish colorations in soda-lime glasses using mixtures that contained silver salts, clay composites and natural oils. The resulting colour was a characteristic pale yellow known as silver-stain. This coloration is mainly caused by the extinction – absorption and, to a lesser extent, scattering – of light occasioned by silver nanoparticles formed inside the glass. This colouring technique comprises a heat treatment divided in two stages: in the first one, an ion exchange between the silver ions in the mixture and the alkali ions in the glass takes place. This process is called nucleation of silver nanoparticles. The second st…
Synthesis and optical characterization of Er-doped bismuth titanate nanoparticles grown by sol-gel hydrothermal method
2017
Abstract The Er 3+ -doped bismuth titanate (Bi 4 Ti 3 O 12 , BIT) nanoparticles were synthesized by a combined sol–gel and hydrothermal method under a partial oxygen pressure of 30 bar. The composition and morphology were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman scattering. They showed pure and homogeneous spherical BIT nanoparticles with a size below the 30 nm. The incorporation of Er ions showed a strong decrease in the lattice parameters, as well as averaged particle size. The photoluminescence up-conversion (excitation wavelength =1480 nm) showed an enhancement of the infrared emission (980 nm) as Er concentration increased, achieving a maxi…
Supercritical hydrothermal synthesis of ZnO nanopowders beyond the critical point : understanding of nucleation and growth steps
2014
The supercritical hydrothermal synthesis of nanopowders (especially metal oxide) has been widely studied. To the best of our knowledge, no nanoparticle formation mechanism has been published yet. In this prospect, this study is dedicated to the understanding of metal oxide nanoparticle nucleation and growth mechanisms. For this purpose, zinc oxide is used as a model material. First, the influence of synthesis operating conditions such as pressure, temperature, pH, precursor concentrations and solution flow rates on particle morphological properties (size, particle size distribution or morphologies) has been investigated. Hence, two approaches have simultaneously been carried out. The first …
Effect of Urea–Hydrogen Peroxide Content on the Photocatalytic Activity of Zinc Oxide Nanoparticles
2021
ZnO nanoparticles (NPs) were synthesized using zinc acetate dihydrate, ethanol, and oxalic acid as precursor, solvent, and complexing agent, respectively, and urea–hydrogen peroxide (UHP) as, simultaneously, nitrogen precursor and oxygen donor. The structural, morphological, textural, and optical properties of ZnO photocatalysts were investigated using different characterization methods such as XRD, SEM, BET, and UV-Vis-DRS. The XRD patterns showed that the products consisted of ZnO and revealed the presence of nitrogen. SEM images revealed the agglomeration and aggregation of NPs. The photocatalytic activity of ZnO samples was estimated based on the photo-oxidation of 2-propanol under UV i…
Dispersive solid-phase extraction based on oleic acid-coated magnetic nanoparticles followed by gas chromatography-mass spectrometry for UV-filter de…
2011
Abstract A sensitive analytical method to concentrate and determine extensively used UV filters in cosmetic products at (ultra)trace levels in water samples is presented. The method is based on a sample treatment using dispersive solid-phase extraction (dSPE) with laboratory-made chemisorbed oleic acid-coated cobalt ferrite (CoFe 2 O 4 @oleic acid) magnetic nanoparticles (MNPs) as optimized sorbent for the target analytes. The variables involved in dSPE were studied and optimized in terms of sensitivity, and the optimum conditions were: mass of sorbent, 100 mg; donor phase volume, 75 mL; pH, 3; and sodium chloride concentration, 30% (w/v). After dSPE, the MNPs were eluted twice with 1.5 mL …
Modified magnetic-based solvent-assisted dispersive solid-phase extraction: application to the determination of cortisol and cortisone in human saliv…
2021
A modification of magnetic-based solvent-assisted dispersive solid-phase extraction (M-SA-DSPE) has been employed for the determination of the biomarkers cortisol and cortisone in saliva samples. M-SA-DSPE is based on the dispersion of the sorbent material by using a disperser solvent like in dispersive solid phase extraction (SA-DSPE) but a magnetic sorbent is used like in magnetic dispersive solid-phase extraction (M-DSPE). Thus, the magnetic sorbent containing the target analytes is retrieved using an external magnet like in M-DSPE. Finally, the analytes are desorbed into a small volume of organic solvent for the subsequent chromatographic analysis. To this regard, a M-SA-DSPE-based meth…
Solid-phase extraction based on ground methacrylate monolith modified with gold nanoparticles for isolation of proteins
2015
In this study, a novel polymeric material functionalized with gold nanoparticles (AuNPs) was prepared as solid-phase extraction (SPE) sorbent for isolation of proteins. The sorbent was synthesized from a powdered poly(glycidyl-co-ethylene dimethacrylate) monolith, and modified with ammonia, followed by immobilization of AuNPs on the pore surface of the material. To evaluate the performance of this SPE support, proteins were selected as test solutes, being the extraction conditions and other parameters (loading capacity and regenerative ability of sorbent) established. The results indicated that this sorbent could be employed to selectively capture proteins according to their pI, on the basi…
Preconcentration of emerging contaminants in environmental water samples by using silica supported Fe3O4 magnetic nanoparticles for improving mass de…
2011
A magnetic material based on Fe(3)O(4) magnetic nanoparticles incorporated in a silica matrix by using a sol-gel procedure has been used to extract and preconcentrate emerging contaminants such as acetylsalicylic acid, acetaminophen, diclofenac and ibuprofen from environmental water samples prior to the analysis with Capillary LC-MS. The use of the proposed silica supported Fe(3)O(4) magnetic nanoparticles enables surfactant free extracts for the analysis with MS detection without interferences in the ionisation step. Under the optimum conditions, we demonstrated the reusability of the magnetic sorbent material during 20 uses without loss in the extraction efficiency. In addition, no cleanu…
Polymer-based materials modified with magnetite nanoparticles for enrichment of phospholipids
2018
[EN] A polymeric material modified with magnetic nanoparticles (MNPs) has been synthesized and evaluated as sorbent both for solid-phase extraction (SPE) and dispersive magnetic solid-phase extraction (MSPE) of phospholipids (PLs) in human milk samples. The synthesized sorbent was characterized by scanning electron microscopy and its iron content was also determined. Several experimental variables that affect the extraction performance (e.g. loading solvent, breakthrough volume and loading capacity) were investigated and a comparison between conventional SPE and MSPE modalities was done. The proposed method was satisfactorily applied to the analysis of PLs in human milk fat extracts in diff…
Spin-crossover nanoparticles anchored on MoS2 layers for heterostructures with tunable strain driven by thermal or light-induced spin switching
2021
In the past few years, the effect of strain on the optical and electronic properties of MoS2 layers has attracted particular attention as it can improve the performance of optoelectronic and spintronic devices. Although several approaches have been explored, strain is typically externally applied on the two-dimensional material. In this work, we describe the preparation of a reversible ‘self-strainable’ system in which the strain is generated at the molecular level by one component of a MoS2-based composite material. Spin-crossover nanoparticles were covalently grafted onto functionalized layers of semiconducting MoS2 to form a hybrid heterostructure. Their ability to switch between two spi…