Search results for "nanoparticle"

Preparation and characterization of a novel chitosan/Al2O3/magnetite nanoparticles composite adsorbent for kinetic, thermodynamic and isotherm studie…

2015

Abstract In this study we developed a novel chitosan/Al 2 O 3 /magnetic iron oxide nanoparticle composite acting as an adsorbent for removing Methyl Orange (MO), a model anionic dye, from aqueous solution. The new adsorbent was characterized by Scanning Electron Microscope (SEM), Thermo Gravimetric Analysis (TGA), Brunauer–Emmett–Teller (BET) specific surface area, Energy Dispersive spectrometer (EDAX), powder X-ray Diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) methods. The MO removal by the developed adsorbent was investigated using batch adsorption technique and all parameters influencing the removal efficiency such as: dose of adsorbent, pH and initial MO concentr…

Precursor Polymers for the Carbon Coating of Au@ZnO Multipods for Application as Active Material in Lithium-Ion Batteries

2014

The synthesis of statistical and block copolymers based on polyacrylonitrile, as a source for carbonaceous materials, and thiol-containing repeating units as inorganic nanoparticle anchoring groups is reported. These polymers are used to coat Au@ZnO multipod heteroparticles with polymer brushes. IR spectroscopy and transmission electron microscopy prove the successful binding of the polymer onto the inorganic nanostructures. Thermogravimetric analysis is applied to compare the binding ability of the block and statistical copolymers. Subsequently, the polymer coating is transformed into a carbonaceous (partially graphitic) coating by pyrolysis. The obtained carbon coating is characterized by…

From Layered Molybdic Acid to Lower-Dimensional Nanostructures by Intercalation of Amines under Ambient Conditions

2006

Nanostructures of varied dimensionality such as rods, scrolls, and disks of molybdenum oxide have been synthesized in gram quantities under ambient conditions using exfoliation of the layers as a synthetic tool. Intercalation of alkylamines (CnH2n+2NH2, where n = 3, 4, 8, 12, and 16) into yellow molybdic acid (MoO3·2H2O) and subsequent treatment with nitric acid resulted in molybdenum oxide nanorods, nanodisks, or oxide−amine composite nanorods. The sizes of the nanoparticles range from a few nanometers to micrometers in length and 10 to 200 nm in diameter. Detailed X-ray, scanning electron microscopy, and transmission electron microscopy analyses reveal an inverse relation between the size…

Carbon nanotubes-based nanohybrids for multifunctional nanocomposites

2017

In the present work, nano-hybrids based on carbon nanotubes (CNTs) bearing immobilized, either through covalent linkage and physical absorption, commercial anti-oxidant molecules have been formulated and used as nanofillers in Ultra High Molecular Weight Polyethylene (UHMWPE), aiming at preparing multifunctional nanocomposites. The effective immobilization of the anti-oxidant molecules has been probed by spectroscopic and thermogravimetric analyses. The study of the morphology and the rheological behaviour of the nanocomposites show that the immobilization of anti-oxidant molecules onto the CNTs surface is beneficial for the state of the polymer/nanoparticles interfacial region. Additionall…

The role of nanoparticles in decreased washout of underwater concrete

2019

Abstract The paper presents research results of the influence of SiO2 nanoparticles on the washout of underwater concrete and hardened concrete. Based on infrared spectroscopy (FTIR) and thermogravimetric (TGA) analyses of the applied anti-washout admixture (AWA), its chemical structure was determined. A beneficial effect of SiO2 nanoparticles on the reduction of the mix washout was demonstrated and the most probable reason for that phenomenon was given, taking into account the AWA chemical structure and its behaviour in the concrete mix environment. It was found that a dosing method of AWA and nanoparticles to the concrete influenced the washout.

Hierarchical structure and cytocompatibility of fish scales from Carassius auratus

2014

Abstract To study the structure and the cytocompatibility of fish scales from Carassius auratus , scanning electron microscopy (SEM) was used to observe the morphology of fish scales treated with different processing methods. Based on varying morphologies and components, the fish scales can be divided into three regions on the surface and three layers in vertical. The functions of these three individual layers were analyzed. SEM results show that the primary inorganic components are spherical or cubic hydroxyapatite (HA) nanoparticles. The fish scales have an ~ 60° overlapped plywood structure of lamellas in the fibrillary plate. The plywood structure consists of co-aligned type I collagen …

Thermally induced structural modifications and O2 trapping in highly porous silica nanoparticles

2014

Abstract In this work we investigate by Raman spectroscopy the effect of isochronal (2 h) thermal treatments in air in the temperature range 200–1000 °C of amorphous silicon dioxide porous nanoparticles with diameters ranging from 5 up to 15 nm and specific surface 590–690 m2/g. Our results indicate that the amorphous structure changes similarly to other porous systems previously investigated, in fact superficial SiOH groups are removed, Si–O–Si linkages are created and the ring statistic is modified, furthermore these data evidence that the three membered rings do not contribute significantly to the Raman signal detected at about 495 cm−1. In addition, after annealing at 900 and 1000 °C we…

Toward development of optical biosensors based on photoluminescence of TiO2 nanoparticles for the detection of Salmonella

2017

Quality control of food and agriculture production is an inseparable part of human safety and wellbeing. Salmonella infections belong to one of the most monitored pathogens in the world, therefore advanced determination of this pathogen can decrease the risks of human diseases caused by this microorganism. In this research we introduce a novel optical immunosensor for determination of Salmonella typhimurium. The immunosensor is based on Titanium dioxide (TiO2) nanoparticles deposited on glass substrates (glass/TiO2)center dot TiO2 nanoparticles exhibit an intense photoluminescence (PL) in the visible range of spectrum at room temperature. The direct immobilization of antibodies (anti-S-Ab) …

TiO2 nanocrystalline powders by W/O microemulsion synthesis

2012

Gold Nanoparticles Supported on Nanoparticulate Ceria as a Powerful Agent against Intracellular Oxidative Stress

2012

Ceria-supported gold nanoparticles are prepared exhibiting peroxidase activity and acting as radical traps. Au/CeO2 shows a remarkable biocompatibility as demonstrated by measuring cellular viability, proliferation, and lack of apoptosis for two human cell lines (Hep3B and HeLa). The antioxidant activity of Au/CeO2 against reactive oxygen species (ROS) is demonstrated by studying the cellular behavior of Hep3B and HeLa in a model of cellular oxidative stress. It is determined that Au/CeO2 exhibits higher antioxidant activity than glutathione, the main cytosolic antioxidant compound, and its CeO2 carrier. Overall the result presented here shows the potential of implementing well-established …