Search results for "opolymerization"
showing 10 items of 56 documents
Ethene/norbornene copolymerization with (isodicyclopentadienyl)titanium complex-MAO catalyst
2007
Norbornene (NB) homopolymerization and ethene/NB copolymerizations with a silylene-bridged (isodicyclopentadienyl)(tert-butylamido)titanium dichloride-methylalumoxane (MAO) catalyst system were investigated. This catalytic system shows no efficiency towards NB homopolymerization but produces poly(ethene-co-norbornene)s. An increase in the initial NB feed content leads to a loss of copolymerization activity as well as NB copolymer incorporation. The structure of the isodicyclopentadienyl fragment (IsodiCp) has a strong limiting effect on comonomer incorporation possibilities.
Acid‐Cleavable Poly(ethylene glycol) Hydrogels Displaying Protein Release at pH 5
2020
Abstract PEG is the gold standard polymer for pharmaceutical applications, however it lacks degradability. Degradation under physiologically relevant pH as present in endolysosomes, cancerous and inflammatory tissues is crucial for many areas. The authors present anionic ring‐opening copolymerization of ethylene oxide with 3,4‐epoxy‐1‐butene (EPB) and subsequent modification to introduce acid‐degradable vinyl ether groups as well as methacrylate (MA) units, enabling radical cross‐linking. Copolymers with different molar ratios of EPB, molecular weights (M n) up to 10 000 g mol−1 and narrow dispersities (Đ<1.05) were prepared. Both the P(EG‐co‐isoEPB)MA copolymer and the hydrogels showed pH‐…
Recent advances in electrochemical meso- and β-functionalization of porphyrins and electrografting of diazonium porphyrins
2020
Abstract Recent studies on electrochemical meso- and β-functionalization of porphyrins and electrografting of diazonium porphyrin are presented. First, the electrochemical oxidative C–C coupling between porphyrins will be presented, followed by the intermolecular and intramolecular meso- and β-substitutions of porphyrins. Then, the latest results on diazonium porphyrin electrografting will be reviewed.
Light induced electropolymerization of poly(3,4-ethylenedioxythiophene) on niobium oxide
2010
Abstract The photoelectrochemical polymerization of poly(3,4-ethylenedioxythiophene), PEDOT, was successfully realized on anodic film grown to 50 V on magnetron sputtered niobium. Photocurrent Spectroscopy was employed to study the optical properties of Nb/Nb 2 O 5 /PEDOT/electrolyte interface in a large range of potential, and to get an estimate of the band gap and flat band potential of both the oxide and the polymer. Scanning Electron Microscopy was used to study the morphology of PEDOT. Both the optical and morphological features of the photoelectrochemically grown polymer were compared with those showed by PEDOT electropolymerized on gold conducting substrate.
Copolymerization of VDF and HFP in Supercritical Carbon Dioxide: A Robust Approach for Modeling Precipitation and Dispersion Kinetics
2012
A kinetic model is developed for the heterogeneous free-radical copolymerization of vinylidene fluoride and hexafluoropropylene in supercritical CO 2. The model accounts for polymerization in both the dispersed (polymer-rich) phase and in the continuous (polymer-free) supercritical phase, for radical interphase transport, diffusion limitations, and chain-length-dependent termination in the polymer-rich phase. A parameter evaluation strategy is developed and detailed to estimate most of the kinetic parameters a priori while minimizing their evaluation by direct fitting. The resulting model predictions compare favorably with the experimental results of conversion and MWD at varying monomer fe…
Copolymerization of ethylene with norbornene or 1-octene using supported ionic liquid systems
2016
Copolymerization of ethylene with norbornene (E/NB) and ethylene with 1-octene (E/Oct) is performed using supported ionic liquid (SIL) systems, in which metallocene (Cp2VCl2) or post-metallocene [VCl2(salenCl2)] vanadium catalysts are immobilized in pyridinium chloroaluminate ionic liquid supported on silica. The studied SIL catalysts show higher activities as well as stability than their non-supported analogues. In addition, higher activities and better comonomer incorporation are observed for norbornene (above 30 mol%). The comonomer incorporation has considerable influence on copolymer molecular weight (M w), melting temperature, crystallinity degree, and microstructure of the copolymers…
The effect of the comonomer on the copolymerization of ethylene with long chain α-olefins using Ziegler–Natta catalysts supported on MgCl2(THF)2
2000
Abstract The effect of the type of the comonomer (1-pentene, 1-hexene, 1-octene, 1-decene and 1-dodecene) on the copolymerization of ethylene with α-olefin over vanadium (VOCl3 and VCl4) and titanium (TiCl4) catalysts supported on MgCl2(THF)2 and activated by Et2AlCl was studied. The results show that the introduction of a longer α-olefin in the ethylene polymerization feed depresses the catalytic activity of all investigated catalysts. The catalyst activity does not depend on the type of the comonomer applied but changes with the comonomer concentration in the feed. The incorporation of α-olefin in the polymer chain was found to be dependent on the type and concentration of the comonomer i…
Synthesis and structural characterization of ethylene copolymers containing double-decker silsesquioxane as pendant groups and cross-linkage sites by…
2018
Abstract The copolymers of ethylene with the double-decker silsesquioxane (DDSQ) were synthesized by copolymerization with the use of metallocene and bis(phenoxy-imine) catalysts. The influence of the kind of the catalyst and polyreaction conditions on the performance of copolymerization as well as on the properties of the copolymers was studied. Depending on polyreaction parameters, the DDSQ contents in the copolymer varied in the range of 0.93–11.53 wt% which determined the compositions and the structural properties of copolymers. DDSQ incorporated into the polymer chain could constitute pendant groups in the main chain or it could act as a cross-linking agent. The ethylene/DDSQ copolymer…
Dichlorovanadium(IV) diamine-bis(phenolate) complexes for ethylene (co)polymerization and 1-olefin isospecific polymerization
2018
Abstract Two vanadium complexes bearing amine-bis(phenolate) ligands with the amino side-arm donor, [V{Me2NCH2CH2N(CH2-2-O-3,5-tBu2-C6H2)2}Cl2] (1) and [V{Me2NCH2CH2N(CH2-2-O-3,5-tBu2-C6H2)(CH2-2-O-C6H4)}Cl2] (2), were synthesised and characterized by FTIR and 1H NMR spectroscopy. Upon activation with Al(iBu)3/Ph3CB(C6F5)4, these complexes became active catalysts for 1-octene polymerization giving highly stereoregular polymers (mmmm ∼ 90%) having regioirregularly arranged units. The catalytic activity of the catalysts in ethylene homo- and copolymerization, and their ability to incorporate a comonomer were highly dependent on both the activator type and the complex structure. 1/EtAlCl2 exhi…
MRI-Visible Poly(ε-caprolactone) with Controlled Contrast Agent Ratios for Enhanced Visualization in Temporary Imaging Applications
2013
International audience; Hydrophobic macromolecular contrast agents (MMCAs) are highly desirable to provide safe and efficient magnetic resonance (MR) visibility to implantable medical devices. In this study, we report on the synthesis and evaluation of novel biodegradable poly(ε-caprolactone)-based MMCAs. Poly(α-propargyl-ε-caprolactone-co-ε-caprolactone)s containing 2, 5, and 10 mol % of propargyl groups have been prepared by ring-opening copolymerization of ε-caprolactone and the corresponding propargylated lactone. In parallel, a diazido derivative of the clinically used diethylenetriaminepentaacetic acid (DTPA)/Gd3+ complex has been synthesized. Finally, MRI-visible poly(ε-caprolactone)…