Search results for "photodegradation"
showing 10 items of 153 documents
Preparation and characterization of Al2O3 supported TiO2 catalysts employed for 4-nitrophenol photodegradation in aqueous medium
1998
Abstract In this paper the preparation and some bulk and surface characterizations of set of Al2O3 supported TiO2 photocatalysts are reported. The powders were home prepared by a wet impregnation method using titanium (IV) isopropylate. The impregnation was followed by thermal treatments and this procedure was repeated several times in order to obtain samples with different amounts of TiO2. The solids were characterized by X-ray diffraction, specific surface area determination, scanning electron microscopy coupled with an electron microprobe used in an energy-dispersive mode and diffuse reflectance spectroscopy. Moreover, all of them were tested as photocatalysts by using different kinds of…
Highly Active Photocatalytic TiO2 Powders Obtained by Thermohydrolysis of TiCl4 in Water
2009
Highly active photocatalytic TiO2 samples were synthesized by thermohydrolysis of TiCl4 in water at 100 °C. Rutile, binary mixtures of anatase and rutile or anatase and brookite or ternary mixtures of anatase, brookite, and rutile were obtained depending on the TiCl4/H2O ratio. Rietveld refinements were employed to evaluate the crystalline phases and composition of the mixtures. The effect of the aging time on the phase composition was also studied. The band gap values of the samples were obtained by the diffuse reflectance spectra. The position of the flat band potentials of anatase, brookite, and rutile was determined measuring the photovoltage as a function of the suspension pH. From the…
Preparation, Characterization, and Photoactivity of Polycrystalline Nanostructured TiO2 Catalysts.
2004
Various preparations of nanostructured TiO2 starting from Ti(iso-OC3H7)4 or TiCl4 are reported. The samples were characterized by X-ray diffractometry, specific surface area and porosity determinations, scanning and transmission electron microscopy, and diffuse reflectance spectroscopy. 4-Nitrophenol photodegradation in aqueous medium was employed as a probe reaction to test the photoactivity of the catalysts. The photoactivity of some samples derived from Ti(iso-OC3H7)4 was found comparable with that of commercial powders. Calcination after the hydrolysis process was necessary to achieve crystallization of the particles before using them as photocatalysts for the reaction studied. The samp…
Preparation and characterisation of TiO2 (anatase) supported on TiO2 (rutile) catalysts employed for 4-nitrophenol photodegradation in aqueous medium…
1999
Abstract In this paper the preparation of two sets of polycrystalline photocatalysts prepared by supporting TiO2 (anatase) on TiO2 (rutile) or Al2O3 is reported. The powders were prepared by a wet impregnation method using titanium(IV) isopropylate. The impregnation was followed by thermal treatment and this procedure was repeated several times in order to obtain samples with progressively increasing amounts of TiO2 (anatase). The photocatalytic activity of all of the specimens was tested by carrying out the 4-nitrophenol photodegradation, used as a “probe” reaction, in aqueous medium and in different kinds of batch photoreactors. The solids were characterised by X-ray diffraction (XRD), sp…
Preparation characterization and photocatalytic activity of polycrystalline ZnO/TiO2 systems. 2. Surface, bulk characterization, and 4-nitrophenol ph…
2001
Electron spin resonance spectroscopy (ESR), Fourier transform infrared spectroscopy (FTIR), and monitoring of pyridine (py) and boric acid trimethyl ester (BATE) adsorption for determining surface acidity and basicity, respectively, were used to carry out further characterization of mixed ZnO/TiO2 polycrystalline solids prepared by different methods. Moreover, the powders were tested in a batch photoreactor for a probe reaction, i.e., 4-nitrophenol photodegradation in aqueous medium. ESR results indicated the presence of signals attributable to Zn+ species in ZnO/TiO2 (anatase) solids, while in ZnO/TiO2 (rutile) samples the presence of zinc induced only the formation of signals probably due…
Rate of photon absorption and turnover number: two parameters for the comparison of heterogeneous photocatalytic systems in a quantitative way
1993
Abstract In order to correctly compare the performance of different photocatalytic systems using polycrystalline semiconductor oxides, two parameters are proposed: the rate of photon absorption (rpa) and the turnover number (tn). From these quantities the quantum yield (qy), which indicates the efficiency of the absorbed photons for promoting a reaction event, can be determined. The phenol photodegradation reaction, carried out in aqueous dispersions of polycrystalline TiO2 (anatase) of different preparation methods and sources, has been used as “test reaction” in order to determine the tn, rpa and qy values.
ChemInform Abstract: Rate of Photon Absorption and Turnover Number: Two Parameters for the Comparison of Heterogeneous Photocatalytic Systems in a Qu…
2010
Abstract In order to correctly compare the performance of different photocatalytic systems using polycrystalline semiconductor oxides, two parameters are proposed: the rate of photon absorption (rpa) and the turnover number (tn). From these quantities the quantum yield (qy), which indicates the efficiency of the absorbed photons for promoting a reaction event, can be determined. The phenol photodegradation reaction, carried out in aqueous dispersions of polycrystalline TiO2 (anatase) of different preparation methods and sources, has been used as “test reaction” in order to determine the tn, rpa and qy values.
Photocatalytic thin films of TiO2 formed by a sol-gel process using titanium tetraisopropoxide as the precursor
2008
Abstract Thin TiO 2 films were prepared with the dip-coating technique by using sols deriving from titanium tetraisopropoxide. TiO 2 films were formed on glass substrates previously covered by a SiO 2 layer obtained from a tetraethylortosilicate sol. The films, after a thermal treatment at 673 K, mainly consisted of TiO 2 anatase. The samples were characterised by X-ray diffraction, UV–Vis spectroscopy, scanning electron microscopy and atomic force microscopy. The photoactivity of the various films was tested by using as probe reaction the photo-oxidation of 2-propanol in gas-solid regime. The photoreactivity results indicated that the TiO 2 films were efficient for degrading 2-propanol und…
Sol-gel derived anatase TiO2: morphology and photoactivity
1994
Abstract High-surface area TiO 2 (anatase) was prepared by the sol-gel method and characterized by various instrumental and analytical methods, including X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, porosimetry, specific surface area measurements, scanning electron microscopy, and titration of surface hydroxyl groups. The specimen was tested for photodegradation of phenol and nitrophenols carried out in aqueous suspension at pH = 3; photoactivity was compared with that of commercially available anatase TiO 2 . Results are discussed in terms of porosity, surface area, and availability and population of surface OH groups, consequent upon the particular method used for…
Surface properties of iron-titania photocatalysts employed for 4-nitrophenol photodegradation in aqueous TiO2 dispersion
1994
Iron(III) doped specimens (0.01–5% atomic Fe ∶ Ti) have been prepared by impregnating polycrystalline “home prepared” TiO2 (mainly anatase) and have been studied for photocatalytic degradation of 4-nitrophenol in aqueous dispersions. Some structural and surface properties have been studied by X-ray diffraction, specific surface area and porosity measurements and FTIR monitoring of pyridine, ammonia and methanoic acid adsorption for surface acidity and basicity. Their surface properties were compared with a corresponding series of photocatalysts prepared by a coprecipitation method. Adsorption of pyridine and ammonia indicates the presence of surface acid Lewis sites, a low concentration of …