Search results for "pilot projects"

showing 10 items of 488 documents

Performance of a pilot-scale biotrickling filter in controlling the volatile organic compound emissions in a furniture manufacturing facility.

2009

A 0.75-m3 pilot-scale biotrickling filter was run for over 1 yr in a Spanish furniture company to evaluate its performance in the removal of volatile organic compounds (VOCs) contained in the emission of two different paint spray booths. The first one was an open front booth used to manually paint furniture, and the second focus was an automatically operated closed booth operated to paint pieces of furniture. In both cases, the VOC emissions were very irregular, with rapid and extreme fluctuations. The pilot plant was operated at an empty bed residence time (EBRT) ranging from 10 to 40 sec, and good removal efficiencies of VOCs were usually obtained. When a buffering activated carbon prefil…

EngineeringManufactured MaterialsAir pollutionPilot ProjectsManagement Monitoring Policy and Lawmedicine.disease_causeResidence time (fluid dynamics)law.inventionBioreactorslawAir PollutionPaintmedicineFactoryVolatile organic compoundWaste Management and DisposalFiltrationchemistry.chemical_classificationVolatile Organic CompoundsWaste managementbusiness.industryFilter (aquarium)Waste treatmentPilot plantBiodegradation EnvironmentalchemistrybusinessFiltrationInterior Design and FurnishingsJournal of the AirWaste Management Association (1995)
researchProduct

Exposure and risk assessment to arsenic species in Spanish children using biomonitoring

2018

We present a new approach to arsenic (As) risk assessment using biomonitoring. In this pilot study we determined the levels of total and speciated urinary arsenicin 109 Spanish school children aged between 6 and 11 years, and interpreted these concentrations in a risk assessment context. The geometric mean (GM) for total As (TAs) was 33.82 mu/L. The order of occurrence and average concentrations of the different species was arsenobetaine (AsB) (100%, 15 mu g/L), dimethylarsinic (DMA) (97%, 8.32 mu g/L), monomethylarsonic (MMA) (26%, 027 mu g/L) and inorganic As (iAs) (4%, 0.14 mu g/L). 18% of children presented exposures to inorganic arsenic (7.52 mu g/g creatinine) higher than guidance val…

Environmental Engineering010504 meteorology & atmospheric sciencesUrinary systemchemistry.chemical_elementPilot ProjectsContext (language use)010501 environmental sciencesRisk Assessment01 natural sciencesArsenicalsArsenicchemistry.chemical_compoundAnimal scienceBiomonitoringHumansEnvironmental ChemistryMedicineChildWaste Management and DisposalArsenic0105 earth and related environmental sciencesCreatininebusiness.industryEnvironmental ExposurePollutionDietSeafoodchemistrySpainEnvironmental PollutantsRisk assessmentArsenobetaineCancer riskbusinessEnvironmental Monitoring
researchProduct

The role of EPS concentration in MBR foaming: analysis of a submerged pilot plant.

2010

Foaming in Membrane BioReactor (MBR) is a frequently discussed topic. Some authors reported that the phenomenon is due to filamentous organisms, like at Conventional Activated Sludge (CAS) plants. However, in recent years, other authors reported that the Extra-cellular Polymer Substances (EPSs) concentration is an important factor for controlling foam as well. Nevertheless, even if a number of MBR plants are affected by foaming, presently there are no suitable methods to evaluate the phenomenon. To facilitate the study of this controversial phenomenon in an MBR system, certain foam tests proposed in the past for CASPs were investigated. The results of the tests were able to adequately measu…

Environmental EngineeringBiofoulingSurface PropertiesBioengineeringPortable water purificationPilot ProjectsMembrane bioreactorWater PurificationMBRBiofoulingBiopolymersBioreactorsFoam testBioreactorcardiovascular diseasesWaste Management and DisposalSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleWaste managementSewageViscosityRenewable Energy Sustainability and the EnvironmentChemistryMembranes ArtificialGeneral MedicinePulp and paper industryPilot plantActivated sludgelipids (amino acids peptides and proteins)EPSExtracellular SpaceProtein concentrationFoamingBioresource technology
researchProduct

Low cost-sensors as a real alternative to on-line nitrogen analysers in continuous systems.

2009

This paper is focused on the evaluation of the applicability of low-cost sensors (pH and ORP) versus nutrient analysers for controlling biological nitrogen removal in WWTPs. A nutrient removal pilot plant located in Carraixet WWTP (Valencia, Spain) that is equipped with a significant number of nutrient analysers and low-cost sensors was used. The relations between reliable, cheap on-line sensors such as pH and ORP (located in anaerobic, anoxic and aerobic zones) and the nitrification/denitrification processes are provided. The nitrification process can be evaluated by measuring the pH difference between the first and last aerobic zones. The denitrification process can be evaluated by measur…

Environmental EngineeringDenitrificationSewageChemistryNitrogenEnvironmental engineeringPilot ProjectsHydrogen-Ion ConcentrationAnoxic watersAerobiosisChemistry Techniques AnalyticalWater PurificationAnaerobic digestionPilot plantWastewaterFuzzy LogicSpainCosts and Cost AnalysisNitrificationSewage treatmentAnaerobiosisAerationWater Science and TechnologyWater science and technology : a journal of the International Association on Water Pollution Research
researchProduct

Nitrous oxide from moving bed based integrated fixed film activated sludge membrane bioreactors

2017

Abstract The present paper reports the results of a nitrous oxide (N 2 O) production investigation in a moving bed based integrated fixed film activated sludge (IFAS) membrane bioreactor (MBR) pilot plant designed in accordance with the University of Cape Town layout for biological phosphorous removal. Gaseous and liquid samples were collected in order to measure the gaseous as well as the dissolved concentration of N 2 O. Furthermore, the gas flow rate from each reactor was measured and the gas flux was estimated. The results confirmed that the anoxic reactor represents the main source of nitrous oxide production. A significant production of N 2 O was, however, also found in the anaerobic …

Environmental EngineeringHydraulic retention timeNitrogen0208 environmental biotechnologySettore AGR/13 - Chimica AgrariaBioreactorNitrous Oxidechemistry.chemical_elementPilot Projects02 engineering and technology010501 environmental sciencesManagement Monitoring Policy and LawMembrane bioreactor01 natural sciencesEmission factorWaste Disposal FluidMBRDenitrifying bacteriachemistry.chemical_compoundBioreactorsBioreactorPilot ProjectEmission factor; IFAS; MBR; Nitrous oxide; UCT; Denitrification; Gases; Nitrogen; Nitrous Oxide; Phosphorus; Pilot Projects; Sewage; Waste Disposal Fluid; Bioreactors; Environmental Engineering; Waste Management and Disposal; Management Monitoring Policy and LawWaste Management and Disposal0105 earth and related environmental sciencesSewageSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleChemistryGasePhosphoruPhosphorusGeneral MedicineNitrous oxideIFASNitrogen020801 environmental engineeringPilot plantActivated sludgeEnvironmental chemistryDenitrificationUCTGases
researchProduct

Hydrogen sulfide and odor removal by field-scale biotrickling filters: Influence of seasonal variations of load and temperature

2012

Two biotrickling filters were set up at two wastewater treatment plants (WWTP) in The Netherlands to investigate their effectiveness for treatment of odorous waste gases from different sources. One biotrickling filter was installed at Nieuwe Waterweg WWTP in Hook of Holland to study the hydrogen sulfide removal from headworks waste air. The other reactor was installed at Harnaschpolder WWTP (treating wastewater of the city of The Hague) to remove mercaptans and other organic compounds (odor) coming from the emissions of the anaerobic tanks of the biological nutrient removal (BNR) activated sludge. The performance of both units showed a stable and highly efficient operation under seasonal va…

Environmental EngineeringHydrogen sulfidePilot ProjectsResidence time (fluid dynamics)Waste Disposal FluidWaste gaschemistry.chemical_compoundBioreactorsAir PollutionSodium HydroxideAnaerobiosisHydrogen SulfideNetherlandsAir PollutantsVolatile Organic CompoundsEnvironmental engineeringGeneral MedicineFilter (aquarium)Biodegradation EnvironmentalActivated sludgeWastewaterOdorchemistryOdorantsSewage treatmentFiltrationJournal of Environmental Science and Health, Part A
researchProduct

Effect of pH, substrate and free nitrous acid concentrations on ammonium oxidation rate.

2012

Respirometric techniques have been used to determine the effect of pH, free nitrous acid (FNA) and substrate concentration on the activity of the ammonium oxidizing bacteria (AOB) present in an activated sludge reactor. With this aim, bacterial activity has been measured at different pH values (ranging from 6.2 to 9.7), total ammonium nitrogen concentrations (ranging from 0.1 to 10 mg TAN L-1) and total nitrite concentrations (ranging from 3 to 43 mg NO2-N L-1). According to the results obtained, the most appropriate kinetic expression for the growth of AOB in activated sludge reactors has been established. Substrate half saturation constant and FNA and pH inhibition constants have been obt…

Environmental EngineeringInorganic chemistryAmmonia oxidizing bacteriaNitrous OxideBioengineeringPilot Projectschemistry.chemical_compoundOxidizing agentpH effectParameter calibrationAmmoniumNitriteAmmonium oxidationWaste Management and DisposalTECNOLOGIA DEL MEDIO AMBIENTEFree ammoniaNitrous acidFree nitrous acidbiologyRenewable Energy Sustainability and the EnvironmentGeneral MedicineHydrogen-Ion Concentrationbiology.organism_classificationQuaternary Ammonium CompoundsKineticsActivated sludgechemistrySaturation (chemistry)BacteriaBioresource technology
researchProduct

A pilot-scale study of struvite precipitation in a stirred tank reactor: Conditions influencing the process

2008

Currently, the two most developed techniques for recovering phosphorus from wastewater consist of the formation of calcium phosphates and struvite (MgNH(4)PO(4).6H(2)O). In this work the influence of the operational conditions on the struvite precipitation process (pH in the reactor, hydraulic retention time, and magnesium:phosphorus, nitrogen:phosphorus, and calcium:magnesium molar ratios) have been studied. Twenty-three experiments with artificial wastewater were performed in a stirred reactor. In order to obtain the pH value maintenance during the crystallization process, a fuzzy logic control has been developed. High phosphorus removal efficiencies were reliably achieved precipitating t…

Environmental EngineeringMaterials scienceHydraulic retention timeNitrogenStruvitePelletsMagnesium Compoundschemistry.chemical_elementContinuous stirred-tank reactorPilot ProjectsBioengineeringPhosphateslaw.inventionchemistry.chemical_compoundlawChemical PrecipitationMagnesiumCrystallizationWaste Management and DisposalWaste managementRenewable Energy Sustainability and the EnvironmentMagnesiumPhosphorusPhosphorusGeneral MedicineHydrogen-Ion ConcentrationWastewaterchemistryChemical engineeringStruviteCalciumCrystallizationBioresource Technology
researchProduct

Pilot scale experiment with MBR operated in intermittent aeration condition: analysis of biological performance.

2014

The effect of intermittent aeration (IA) on a MBR system was investigated. The study was aimed at ana- lyzing different working conditions and the influence of different IA cycles on the biological performance of the MBR pilot plant, in terms of organic carbon and ammonium removal as well as extracellular poly- meric substances (EPSs) production. The membrane modules were placed in a separate compartment, continuously aerated. This configuration allowed to disconnect from the filtration stage the biological phenomena occurring into the IA bioreactor. The observed results highlighted good efficiencies, in terms of organic carbon and ammonium removal. It was noticed a significant soluble micr…

Environmental EngineeringNitrogenBioengineeringPilot ProjectsMBR systemsWastewaterlaw.inventionExtracellular polymeric substanceBiopolymersBioreactorslawBioreactorWaste Management and DisposalFiltrationBiological Oxygen Demand AnalysisFoulingSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleRenewable Energy Sustainability and the EnvironmentChemistryEnvironmental engineeringGeneral MedicineAnoxic watersNitrificationAerobiosisCarbonIntermittent aerationActivated sludgePilot plantBiodegradation EnvironmentalActivated sludgeDenitrificationAerationVolatilizationBiological treatmentBiotechnologyBioresource technology
researchProduct

Calibration of denitrifying activity of polyphosphate accumulating organisms in an extended ASM2d model

2010

Abstract This paper presents the results of an experimental study for the modelling and calibration of denitrifying activity of polyphosphate accumulating organisms (PAOs) in full-scale WWTPs that incorporate simultaneous nitrogen and phosphorus removal. The convenience of using different yields under aerobic and anoxic conditions for modelling biological phosphorus removal processes with the ASM2d has been demonstrated. Thus, parameter ηPAO in the model is given a physical meaning and represents the fraction of PAOs that are able to follow the DPAO metabolism. Using stoichiometric relationships, which are based on assumed biochemical pathways, the anoxic yields considered in the extended A…

Environmental EngineeringNitrogenElectronsPilot ProjectsModels BiologicalWaste Disposal FluidDenitrifying bacteriaPolyphosphatesCalibrationProcess optimizationAnaerobiosisWaste Management and DisposalAcetic AcidWater Science and TechnologyCivil and Structural EngineeringAutotrophic ProcessesNitratesBacteriaSewageChemistryEcological ModelingEnvironmental engineeringPhosphorusPollutionAnoxic watersOxygenPolyphosphate-accumulating organismsPilot plantActivated sludgeEnhanced biological phosphorus removalCalibrationBiological systemWater Research
researchProduct