Search results for "polymer nanocomposite"
showing 10 items of 55 documents
Novel non-destructive evaluation technique for the detection of poor dispersion of carbon nanotubes in nanocomposites
2019
Abstract A wide use of advanced carbon nanotube polymer composites can be boosted by new non-destructive evaluation (NDE) techniques that can test the quality of the products to ensure that their specifications are met. It is well known in literature that the parameter that far more than others can affect the enhancing capabilities of the carbon nanotubes is their dispersion. Here we have presented a novel NDE technique based on infrared thermography able to evaluate the dispersion of the added nanoparticles in polymer nanocomposites. The NDE technique was used to compare pairs of samples whose difference is represented only by the level of dispersion. It was found a significant difference …
Ag and Au/DNQ-novolac nanocomposites patternable by ultraviolet lithography: a fast route to plasmonic sensor microfabrication
2010
In this work we report on a method to synthesize Ag–Au nanoparticles/polymer nanocomposite patterns by UV lithography. The photoresists are based on DNQ-novolac as the polymer matrix, and Ag(I) and Au(III) salts as the nanoparticle precursors. After UV lithography, silver and gold nanoparticles are in situ synthesized inside the polymer patterns during a post bake. The resulting structured nanocomposite shows a characteristic absorbance spectrum related to the plasmon frequency of the synthesized noble metal NPs. This method represents a fast, simple and low-cost approach to the formation of extended polymer patterns with embedded silver or gold NPs. Moreover, it is a mechanism to position …
Elastic Modulus and Thermal Conductivity of Thiolene/TiO2 Nanocomposites
2017
Metal oxide based polymer nanocomposites find diverse applications as functional materials, and in particular thiol-ene/TiO2 nanocomposites are promising candidates for dental restorative materials. The important mechanical and thermal properties of the nanocomposites, however, are still not well understood. In this study, the elastic modulus and thermal conductivity of thiol-ene/TiO2 nanocomposite thin films with varying weight fractions of TiO2 nanoparticles are investigated by using Brillouin light scattering spectroscopy and 3ω measurements, respectively. As the TiO2 weight fraction increases from 0 to 90%, the effective elastic longitudinal modulus of the films increases from 6.2 to 37…
Recycled Polycarbonate Based Nanocomposites
2013
Post-consumer polycarbonate (RPC) blends with various amounts (5, 10, 30 wt. %) of ethylene vinyl acetate copolymer (EVAc) are investigated as potential nanocomposite matrices. At EVAc weight content of 10 wt.% maximum tensile strength σM and impact strength AI increase is observed in comparison to neat RPC. Addition of EVAc, however, reduces resistance to creep as well as decrease thermal stability of the investigated compositions. Addition of montmorillonite nanoclay (MMT), however, allows increase modulus of elasticity E and yield strength σY of the investigated RPC blend with 10 wt. % of EVAc. Besides it creep resistance and thermal resistance of the investigated system is increased to …
Injection Molding and Mechanical Properties of Bio-Based Polymer Nanocomposites
2018
The use of biodegradable/bio-based polymers is of great importance in addressing several issues related to environmental protection, public health, and new, stricter legislation. Yet some applications require improved properties (such as barrier or mechanical properties), suggesting the use of nanosized fillers in order to obtain bio-based polymer nanocomposites. In this work, bionanocomposites based on two different biodegradable polymers (coming from the Bioflex and MaterBi families) and two different nanosized fillers (organo-modified clay and hydrophobic-coated precipitated calcium carbonate) were prepared and compared with traditional nanocomposites with high-density polyethylene (HDPE…
Creep response of a LDPE-based nanocomposite
2016
Polymer nanocomposites and their behavior have been widely investigated by several paths, including mechanical, rheological, and permeability tests, finding that several parameters (such as the polymer matrix, the nanofiller, their amounts, the presence of compatibilizers, processing parameters, etc.) can influence the main properties. However, less information is available regarding the creep response of polymer nanocomposites; in particular, few or no data are reported about the combined effect of different loads and different temperatures. In this article, the creep behavior of a low density polyethylene/organomodified clay nanocomposite has been investigated. The characterization of vis…
Multi-functional polyhedral oligomeric silsesquioxane-functionalized carbon nanotubes for photo-oxidative stable Ultra-High Molecular Weight Polyethy…
2016
Abstract Nanohybrid (phPOSS- f -CNTs) based on Carbon Nanotubes (CNTs) and Phenyl Polyhedral Olygomenric Silsesquioxane (phPOSS) have been synthesized to be used as multifunctional filler for polymer nanocomposites. The success of the functionalization procedure has been demonstrated via accurate spectroscopic, spectrometric and thermo-gravimetric analyses. The results reveal that a large portion of phPOSS is covalently linked to CNTs, while a small amount of phPOSS remains physically adsorbed due to the strong interactions coming from π electron coupling between the CNTs and phenyl rings in phPOSS. Small amounts (1 wt.%) of phPOSS- f -CNTs have been dispersed in Ultra High Molecular Weight…
Accelerated weathering of PP based nanocomposites: Effect of the presence of maleic anhydryde grafted polypropylene
2013
Polymer nanocomposites are currently a topic of great interest. The increasing importance they are gaining also in the standpoint of industrial applications, is giving concerns regarding their environmental stability and, in general, their behaviour in outdoor applications, under direct solar irradiation. Papers available in the literature have highlighted the different influences of different nanosized fillers, in particular clay-based nanofillers; however, few data are available regarding other nanosized fillers. Furthermore, the research on polymer nanocomposites has clearly pointed out that the use of compatibilizers is required to improve the mechanical performance and the dispersion o…
Photooxidation Behavior of a LDPE/Clay Nanocomposite Monitored through Creep Measurements
2017
Creep behavior of polymer nanocomposites has not been extensively investigated so far, especially when its effects are combined with those due to photooxidation, which are usually studied in completely independent ways. In this work, the photooxidation behavior of a low density polyethylene/organomodified clay nanocomposite system was monitored by measuring the creep curves obtained while subjecting the sample to the combined action of temperature, tensile stress, and UV radiation. The creep curves of the irradiated samples were found to be lower than those of the non-irradiated ones and progressively diverging, because of the formation of branching and cross-linking due to photooxidation. …
Photo-oxidation of polypropylene/graphene nanoplatelets composites
2019
Abstract The photo-oxidation behaviour of polymer nanocomposites depends not only on the photo-oxidation behaviour of the matrix, but also on the chemical composition, on the physical properties of the nanoparticles and on the possible interactions between the two phases. In the case of nanocomposites with carbonaceous particles, the main effect is a photo-stabilization due to the absorption of the UV energy and the radical scavenging action. In this work we investigated the effect of the presence of graphene nanoplatelets on the photo-oxidation behaviour of the polypropylene. The presence of the graphene nanoplatelets improves the photo-resistance of the polypropylene and this effect incre…