Search results for "polymers"
showing 10 items of 3567 documents
Nanoemulsions for synthesis of biomedical nanocarriers
2021
Nanoemulsions are kinetically stabilized emulsions with droplet sizes in the nanometer scale. These nanodroplets are able to confine spaces in which reactions of polymerization or precipitation can take place, leading to the formation of particles and capsules that can act as nanocarriers for biomedical applications. This review discusses the different possibilities of using nanoemulsions for preparing biomedical nanocarriers. According to the chemical nature, nanocarriers prepared in nanoemulsions are classified in polymeric, inorganic, or hybrid. The main synthetic strategies for each type are revised, including miniemulsion polymerization, nanoemulsion-solvent evaporation, spontaneous em…
Influence of different parameters on drug release from hydrogel systems to a biomembrane model. Evaluation by differential scanning calorimetry techn…
2000
A comparative study on the drug release capacity of four water swellable polymeric systems was carried out by differential scanning calorimetry (DSC). The polymeric systems chosen were alpha,beta-polyaspartahydrazide (PAHy) crosslinked by glutaraldehyde (GLU) (PAHy-GLU) or by ethyleneglycoldiglycidylether (EGDGE), (PAHy-EGDGE), polyvinylalcohol (PVA) crosslinked by glutaraldehyde (PVA-GLU) and alpha,beta-poly(N-hydroxyethyl)-DL-aspartamide (PHEA) by gamma irradiation (PHEA-gamma matrices). The degree of crosslinking for PAHy-GLU, PAHy-EGDGE and PVA-GLU samples was about 0.4 and 0.8. These hydrogels were characterized as free of drugs and were loaded with diflunisal (DFN) (approximately 2.5%…
NANOPARTICLES BASED ON NOVEL AMPHIPHILIC POLYASPARTAMIDE COPOLYMERS
2010
In this article, the synthesis of two amphiphilic polyaspartamide copolymers, useful to obtain polymeric nanoparticles without using surfactants or stabilizing agents, is described. These copolymers were obtained starting from α,β-poly-(N-2-hydroxyethyl)-dl-aspartamide (PHEA) by following a novel synthetic strategy. In particular, PHEA and its pegylated derivative (PHEA-PEG2000) were functionalized with poly(lactic acid) (PLA) through 1,1′-carbonyldiimidazole (CDI) activation to obtain PHEA–PLA and PHEA-PEG2000–PLA graft copolymers, respectively. These copolymers were properly purified and characterized by 1H-NMR, FT-IR, and Size Exclusion Chromatography (SEC) analyses, which confirmed that…
Hydrothermal ageing of polylactide/sisal biocomposites. Studies of water absorption behaviour and Physico-Chemical performance
2014
An accelerated hydrothermal degrading test was designed in order to analyse the synergic effect of water and temperature on PLA/sisal biocomposites with and without coupling agent. As well, the physicochemical properties of biocomposites were monitored along the hydrothermal test by means of Scanning Electron Microscopy, Size Exclusion Chromatography and Differential Scanning Calorimetry. The addition of fibre induced higher water absorption capability and promoted physical degradation, as observed in the surface topography. During the processing of biocomposites and throughout the hydrothermal ageing, a reduction of molecular weight due to chain scission was found. As a consequence, a fast…
Fracture toughness of synthesised high-performance epoxies subject to accelerated water aging
2018
Abstract The effects of water uptake on the fracture toughness of epoxy systems with high glass-transition temperatures (Tg above 170 °C) are investigated. Aging conditioning has been conducted in hot water, followed by a desorption conditioning in a room temperature dry-airborne. Water aging determines plasticisation effects and crosslink-density modifications, revealed by reductions of the Tg. It is less known how such modifications influence the material fracture toughness. In this study, Single Edge Notched Bending samples have been tested according to standards, to evaluate the KIC fracture toughness at different stages of water absorption-desorption. The characterisation has been supp…
Carbon Fiber Composites Cured by γ-Radiation-Induced Polymerization of an Epoxy Resin Matrix
2008
The use of ionizing radiation in order to initiate polymerization of suitable monomers has found increased interest in the last two decades due to its several advantages. In this work, carbon fiber composites through gamma radiation polymerization of epoxy matrices have been produced for aerospace and advanced automotive applications. Composite samples were produced by irradiation at room temperature using different radiation doses and, as reference, thermal curing of the same epoxy resin formulations was also carried out. Furthermore, some irradiated samples were subjected to postirradiation thermal curing to complete the polymerization reactions. The properties of the cured materials were…
Anomalous water diffusion in epoxy/carbon nanoparticle composites
2019
Abstract Water absorption-desorption-resorption and swelling were studied for a DGEBA-based amine-cured epoxy resin filled with four types of carbon nanoparticles: multiwall carbon nanotubes (MWCNT), graphite nano-platelets (GnP), expanded graphite platelets, and carbon black. Nanocomposites are characterised by lower diffusivity (down to 20% for epoxy/GnP) and increased water sorption capacity compared to the neat epoxy. Anomalous water absorption and swelling of nanocomposites is finely described by the diffusion-relaxation model. The relaxation times, considered as quantitative indicators of changes in segmental mobility of the polymer, increased with addition of nanoparticles and decrea…
Creep of polymer concrete in the nonlinear region
2000
Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and su…
Green composites of organic materials and recycled post-consumer polyethylene
2004
International audience; Addition of organic fillers to post‐consumer recycled plastics can give rise to several advantages. First of all, the cost of these fillers is usually very low, the organic fillers are biodegradable contributing to an improved environmental impact and, last but not least, some mechanical and thermomechanical properties can be enhanced. Organic fillers are not widely used in the plastic industry although their use is increasing. Bad dispersion into the polymer matrix at high‐level content and poor adhesion with the matrix are the more important obstacles to this approach. In this work various organic fillers have been used with a post‐consumer plastic material origina…
Vascularization and gene regulation of human endothelial cells growing on porous polyethersulfone (PES) hollow fiber membranes.
2004
Abstract Open-cell hollow fibers made of polyethersulfone (PES) manufactured in the absence of solvents with pore diameters smaller than 100 μm were examined for vascularization by human endothelial cells. The goal of this study was to determine whether the 3-D porous character of the PES surface affected human endothelial cell morphology and functions. Freshly isolated human endothelial cells from the skin (HDMEC), from the lung (HPMEC) and from umbilical cords (HUVEC) and two human endothelial cell lines, HPMEC-ST1.6R and ISO-HAS.c1 were added to PES fibers and cell adherence and growth was followed by confocal laser scanning microscopy. Prior coating of PES with gelatin or fibronectin wa…