Search results for "powder metallurgy"
showing 10 items of 22 documents
Physical chemistry of the powder metallurgy of beryllium: Chemical characterization of the powder in relation to its granularity
1996
Combining the systematic quantitative chemical analysis of the light impurities H, C, N, and O, the quantitative thermal desorption of molecular H2O and H2, and X ray diffractometry of various size fractions of a commercial Be powder (SP-65 grade from Brush-Wellman) allowed the precise de-termination of the mean composition and equivalent mean thickness of the surface impurity phases in the passivation-contamination layer on the surface of the particles. The overall surface stoichi-ometry is as follows: 0.2 BeOcrystallized, 0.8 [BeO - 0.59 H2O]amorphous, 0.14 H2Oads The result of the elemental analysis by X-ray photoelectron spectroscopy of the unetched surface of a powder pellet is compare…
Microstructure-oxidation resistance relationship in Ti3AlC2 MAX phase
2020
International audience; Spark Plasma Sintering and Hot Isostatic Pressing were used to synthesize coarse-grained and fine-grained Ti3AlC2 specimens. Moreover, Spark Plasma Sintering processing parameters were modified in order to vary the TiC, Al2O3 and TixAly impurity and the porosity contents in the fine-grained samples. The influence of the Ti3AlC2 microstructure on the oxidation resistance was assesed. It is demonstrated that the grain size can drastically modify the oxidation resistance. The higher density of grain boundaries, in fine-grained specimens, increases the number of Al diffusion paths and leads to the formation of a protective alumina scale. In coarse-grained sample, Al diff…
Porous titanium for biomedical applications : an experimental study on rabbits
2010
Made available in DSpace on 2013-08-12T18:44:08Z (GMT). No. of bitstreams: 0 Previous issue date: 2010-03-01 Made available in DSpace on 2013-09-30T18:34:10Z (GMT). No. of bitstreams: 0 Previous issue date: 2010-03-01 Submitted by Vitor Silverio Rodrigues (vitorsrodrigues@reitoria.unesp.br) on 2014-05-20T14:04:32Z No. of bitstreams: 0 Made available in DSpace on 2014-05-20T14:04:32Z (GMT). No. of bitstreams: 0 Previous issue date: 2010-03-01 Objective: The aim of this study was to carry out an in vivo assessment of bone ingrowth in two different types of porous titanium -the first being completely porous, and the second with a porous surface and dense nucleus, manufactured by powder metallu…
Development of high entropy tungsten-based alloys by powder metallurgy processes
2022
Although metallurgy is a very old research domain, many innovations are still being considered, such as the emergence of high-entropy alloys. These alloys, composed of at least three elements, are characterized by a chemical composition without a majority element and most of the time equimolar. Research in this field is very recent since the first studies concerning these alloys are from the early 2000s. The original chemical compositions of these alloys open the way to many possibilities to obtain unusual properties.In conjunction with these developments, powder metallurgy processes are expanding quickly because of the advantages they offer over more traditional techniques (foundry and for…
Consolidation and densification mechanisms of copper powder during Spark plasma sintering (SPS)
2015
Spark plasma sintering is a manufacturing process that leads to dense materials with fine microstructures. SPS combines heating and uniaxial load as well as the Hot Pressing (HP) process but the material is heated using a pulsed current. The phenomena occurring during SPS are not fully understood and are still an open point: -Which densification and consolidation mechanisms are involved during SPS? -Why is sintering by SPS more efficient than sintering by traditional ways such as HP? –Does electrical current modify the sintering mechanisms? The aim of this work is to answer these questions in the case of spherical copper powder (from 10 to 50 µm). Comparisons between SPS and HP were perform…
Spark plasma synthesis from mechanically activated powders: a versatile route for producing dense nanostructured iron aluminides
2004
Abstract The possibility of mechanically activated spark plasma sintering (MASPS) to perform simultaneously within a very short period of time the synthesis and the consolidation of nanophase iron aluminide from mechanically activated powders of Fe and Al in two different ratio (Fe53 at.% and Fe60 at.%) were confirmed in this work.
Mechanical activation effect on the self-sustaining combustion reaction in the Mo–Si system
2001
Abstract Nanostructured molybdenum disilicide (MoSi2) was synthesized using an alternative route called MASHS (mechanically activated self-propagating high-temperature synthesis). This original process combines a short duration ball milling (MA) with a self-sustaining combustion (SHS). These two steps were investigated. The microstructure evolution of the powder mixture during mechanical activation was monitored using XRD profile analysis and TEM investigations. Short duration ball milling of (Mo+2Si) powder produces Mo and Si nanocrystallites into micrometric particles. It was demonstrated that pure α-MoSi2 with nanometric structure (DMoSi2=88 nm) could be produced via a very fast combusti…
Bulk FeAl nanostructured materials obtained by spray forming and spark plasma sintering
2007
Abstract This paper examines the efficiency of two consolidation processing techniques high velocity oxy-fuel (HVOF) spray forming and spark plasma sintering (SPS) which allow to obtain bulk dense nanostructured materials. An oxide dispersion strengthened (ODS) Fe–40Al (at.%) based milled powder (with a nanostructure
A new approach to the synthesis of intermetallic compounds: mild synthesis of submicrometric CoxMy (M = Mo, W; x∶y = 3∶1 and 7∶6) particles by direct…
2002
A simple processing route to cobalt–molybdenum and cobalt–tungsten intermetallics (CoxMy, where M = Mo and W, and x∶y = 3∶1 and 7∶6) has been developed, on the basis of the use of precursors resulting from freeze-drying of aqueous solutions of the appropriate common metal salts. The influence of the preparative variables on the outcomes of this procedure is examined. These compounds are prepared as single phases by thermal reduction of amorphous freeze-dried powders under a hydrogen–argon atmosphere (8% H2), followed by slow cooling of the samples. The materials have been characterised by X-ray powder diffraction, metal analysis, scanning electron microscopy and thermogravimetry under an ox…
Open Cell Al-Si Foams by a Sintering and Dissolution Process
2014
Open cell foams from AlSi12 alloy were successfully fabricated by the Sintering and Dissolution Process, using NaCl as space holder (60 %). The size of the aluminum alloy powder is less than 45 μm, while the space holder powder size is 315-500 μm, 630-800 μm and 800-1250 μm respectively. The appropriate quantities of alloy powder and salt were mixed and cold pressed at 250 MPa. The sintering process was done at 500 °C and 545 °C, in vacuum (10-5 torr) for 10, 20 and 30 minutes respectively. The space holder was eliminated by holding the sintered samples in running hot water (70 °C). After the salt was dissolved, the samples were dried and the mass loss was analyzed. Keywords: Aluminum foam…