Search results for "proPO"
showing 10 items of 1325 documents
Creating customer value through industrial services : case: Raute Technology Services
2014
The role of marketing can be seen as to assist the company on creating superior value for its customers, so that they would succeed against their competitors. Creating superior value has not always been essential, as in the past firms could achieve profitability due to regulated markets, controlled distribution channels or scarce resources. An increasing number of industrial manufacturing companies are moving from offering solely products to offering combinations of products and services. Customers benefit from industrial services as they support and enable the value generation of the products they have purchased. To firms, offering services is a matter of competitive advantage since servic…
An electrochemical process to prepare and recycle biobased ionic liquids
2019
This manuscript describes the first electrosynthesis of biobased ionic liquids from L-valine, oxalic acid and glyoxal, which is energy-efficient, does not emit toxic waste and avoids the formation of inorganic waste. These ionic liquids were then used in the development of our electro-recycling process. While their recycling yields are still moderated due to recombination and disproportionation reactions, this unprecedented recycling technology is very promising in terms of environmental and economic gains. Indeed, it has a high energy efficiency, requires low cost equipment, allows a strong decrease of the price of such ionic solvents, limits the use of non-renewable resources and solves t…
Conductimetry and impedance spectroscopy study of low pressure metal organic chemical vapor deposition TiN O films as a function of the growth temper…
2001
Abstract Titanium oxinitride thin films have been grown by low pressure metal organic chemical vapor deposition (LP-MOCVD) using titanium isopropoxide, Ti(OCH(CH 3 ) 2 ) 4 (TIP) and NH 3 precursors in a growth temperature range from 450 to 750°C on sapphire substrates. The electrical behaviour of these films was studied between 400 and 173 K, revealing three different behaviours, ranking from a hopping conductivity (450–500°C) to a conducting one (700–750°C), with a dual behaviour for the intermediate growth temperatures. Moreover, at room temperature, both conductimetry and impedance spectroscopy highlighted a percolation behaviour, interpreted in terms of continuum percolation. The effect…
Electrochemical and Spectroelectrochemical Behavior of a Tetracyanotriphenodioxazine in Solution and Thin-Films
2018
International audience; We report the electrochemical behavior of a tetracyano triphenodioxazine bearing two triisopropylsilylethynyl moieties (TiPS‐TPDO‐tetraCN) during its reduction studied either in solution or after vacuum evaporation deposition on indium tin oxide (ITO) support. While in dichloromethane, it typically proceeds in two successive monoelectronic reactions, in acetonitrile, the mechanism appears more complex. Fine analysis of the spectroelectrochemical results combined with simulation of the voltammograms with various amount of water suggest the involvement of water and of a restructured dianion in the electrochemical process. In the solid‐state, the formation of the diprot…
SEM and XPS studies of titanium dioxide thin films grown by MOCVD
1998
Abstract The metal organic chemical vapour deposition (MOCVD) method was used to prepare titanium dioxide thin films. Thin films of TiO2, about 100 nm thick, were deposited on (100)Si and (1102)Al2O3 sapphire substrates using titanium isopropoxide (Ti(OC3H7)4) as metal organic precursor. The morphology of the films and the presence of impurities on the thin films surfaces were studied using respectively, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The influence of the growth parameters such as the deposition temperature, the carrier gas (nitrogen) flow rate and the presence of an additional oxygen flow on the characteristics of the titanium dioxide films h…
Low-temperature Ti-containing 3:2 and 2:1 mullite nanocrystals from single-phase gels
2007
Abstract TiO 2 -containig single-phase gels with (Al 2 O 3 + TiO 2 )/(SiO 2 ) molar ratios 3/2 and 2/1 were prepared by gelling mixtures of aluminium nitrate, tetraethylorthosilicate and titanium isopropoxide. Gels were fast heated at several temperatures up to 1100 °C. Dried and heated gels were characterized by differential thermal analysis (DTA), magic angle spinning nuclear magnetic resonance (MAS-NMR), X-ray powder diffraction (XRD), and scanning and transmission electron microscopies (SEM and TEM). Coupled DTA and XRD results of gels fast heated at 900 °C showed the crystallisation of two mullites as well as a small amount of alumina-silica spinel. 27 Al NMR spectra showed the format…
Thermal stability of Au–TiO2 nanocomposite films prepared by direct liquid injection CVD
2015
Abstract Nanocomposite films composed of gold nanoparticles (AuNPs) embedded in a TiO 2 matrix have been prepared by direct liquid injection chemical vapor deposition process, using preformed nanoparticles and titanium isopropoxide as precursors. The spherical AuNPs about 4.1 nm in diameter were synthesized by using gold (III) chloride trihydrate and stabilized by thiol ligands. The depositions were carried out by performing at first oxide deposition, then gold nanoparticle one and capping with oxide. The morphology, structure; the chemical state and optical properties of nanocomposite films were characterized by scanning electron microscopy, Raman, X-ray photoelectron and UV–Vis absorption…
Correlation Between the Electrical Properties and the Morphology of Low-Pressure MOCVD Titanium Oxynitride Thin Films Grown at Various Temperatures
2000
Titanium oxynitride (TiN x O y ) thin films were deposited by low-pressure metal-organic CVD (LP-MOCVD) on (100) silicon, sapphire, and polycrystalline alumina substrates. Titanium isopropoxide (TIP) and ammonia were used as precursors. The influence of the growth temperature, ranking from 450°C to 750°C, was investigated by scanning electron microscopy (SEM), and electrical DC measurements. Rutherford back-scattering (RBS) measurements were used to determine the N/O ratio in the films. The surface observations of the deposited films showed two morphological transitions. The resistivity decreased with the growth temperature, while the nitrogen content increased. Moreover, for the highest de…
Pulsed Direct liquid Injection ALD of TiO2 Films Using Titanium Tetraisopropoxide Precursor
2013
Abstract TiO 2 thin films are grown by pulsed direct liquid injection atomic layer deposition with rapid thermal heating using titanium tetraisopropoxide and water vapor as precursors. The ALD growth rate is constant in the saturation zone range 35-47 ms at the temperature deposition of 280 °C. The TiO 2 growth rate of 0.018 nm/cycle was achieved in a self-limited ALD mode. SEM and AFM analysis showed the as-deposited films have a smooth surface with a low roughness. XPS analysis exhibited the stoichiometry of TiO 2 in the homogenous depth composition.
Influence of sol counter-ions on the visible light induced photocatalytic behaviour of TiO2 nanoparticles
2014
Titanium dioxide (TiO2) nanoparticles are attracting increasing interest because of their superior photocatalytic and antibacterial properties. Here, aqueous titanium oxy-hydroxide sols were made, using a green synthesis method, from the controlled hydrolysis/peptisation of titanium isopropoxide. Three different mineral acids were used to peptise the sol (HNO3, HBr and HCl), and provide counter-ions. The influence of nitrate or halide sol counter-ions on size distributions of the starting sols were measured via photon correlation spectroscopy (PCS). Semi-quantitative phase composition analysis (QPA), on the gels thermally treated at 450 and 600 degrees C, was carried out via Rietveld refine…