Search results for "proper"
showing 10 items of 3167 documents
The Effect of Electronic Properties of Anodized and Hard Anodized Ti and Ti6Al4V on Their Reactivity in Simulated Body Fluid
2022
The electronic properties of barrier and porous layers on Ti and Ti6Al4V were studied. Barrier anodic oxides grown to 40 V on Ti and on Ti6Al4V are both n-type semiconductors with a band gap of 3.3 eV and 3.4 eV respectively, in agreement with the formation of amorphous TiO2. Anodizing to 200 V at 20 mA cm−2 in calcium acetate and β-glycerol phosphate disodium pentahydrate leads to the formation of Ca and P containing porous films with a photoelectrochemical behaviour dependent on the metallic substrate. A band gap of 3.2 eV and the flat band potential of −0.5 V vs Ag/AgCl were measured for the porous oxide on Ti, while optical transitions at 2.15 eV and a significantly more positive flat b…
Pentafulvene durch Aminomethinylierung des Cyclopentadiens
1986
Aus der Dreikomponentenreaktion von Cyclopentadien (1) mit s-Triazin (2) und einem sekundaren Amin 4 gehen die cyclisch N,N-disubstituierten Pentafulven-6-amine 5 und die cyclisch N1,N1-disubstituierten N2-(6-Pentafulvenyl)formamidine 7 hervor. Unter den biologischen Eigenschaften der neuen Verbindungen ist besonders die anthelminthische Wirkung von 5d interessant. Pentafulvenes by Aminomethynylation of Cyclopentadiene The three component reaction comprising the interaction of cyclopentadiene (1) with s-triazine (2) and a secondary amine 4 leads to the cyclic N,N-disubstituted pentafulven-6-amines 5 and the cyclic N1,N1-disubstituted N2-(6-pentafulvenyl)formamidines 7. Among the biological …
ChemInform Abstract: A Versatile Approach to CF3-Containing 2-Pyrrolidones by Tandem Michael Addition-Cyclization: Exemplification in the Synthesis o…
2016
The synthesis of new fluorinated pyrrolidones starting from unprotected amino esters and amino nitriles through a Michael addition-lactamization sequence is described. The resulting CF3 -containing building blocks, bearing a quaternary stereogenic center adjacent to the fluorinated group, have been converted into amino pyrrolidines that display potent β-secretase 1 (BACE1) inhibitory activity. This work constitutes an example of selective fluorination as a valid strategy for the modulation of physicochemical and biological properties of lead compounds in drug discovery.
Characterization of Thin Passive Film-Electrolyte Junctions. The Amorphous Semiconductor (a-SC) Schottky Barrier Approach.
2017
A detailed study of the electronic properties of thin (< 20 nm) anodic TiO2 potentiostatically grown on titanium in two different solutions is presented. The results show that the nature of the anodizing solution affects the electronic properties of the anodic film and in particular the density of electronic state (DOS) distribution. Different DOS were derived from the experimental data analyzed according to the theory of amorphous semiconductor (a-SC) Schottky barrier. It is shown that the usual non-linear and frequency dependent Mott-Schottky plots are in agreement with expected theoretical behaviour of a-SC Schottky barrier. It is shown the importance of the DOS distribution in determini…
<title>Holographic properties of dielectric crystals and amorphous semiconductor films</title>
2001
Holographic recording properties and mechanisms are analyzed and compared in dielectric electrooptic crystals (EOC), dielectric colored alkali halide crystals (AHC) and amorphous semiconductor films (ASF) basing on author's investigations as well as on the literature data. Holographic photosensitivity parameters are introduced enabling the characterization of the recording mechanism efficiency independently of the particular optical and geometrical sample parameters, and allowing also for recording optimization. Ultimate specific recording energies for EOC, AHC and ASF are theoretically estimated. It is concluded that the ultimate recording energy for both crystalline and amorphous material…
Influence of the electro-optical properties of an a-Si:H single layer on the performances of a pin solar cell
2012
We analyze the results of an extensive characterization study involving electrical and optical measurements carried out on hydrogenated amorphous silicon (α-Si:H) thin film materials fabricated under a wide range of deposition conditions. By adjusting the synthesis parameters, we evidenced how conductivity, activation energy, electrical transport and optical absorption of an α-Si:H layer can be modified and optimized. We analyzed the activation energy and the pre-exponential factor of the dark conductivity by varying the dopant-to-silane gas flow ratio. Optical measurements allowed to extract the absorption spectra and the optical bandgap. Additionally, we report on the temperature dependen…
Secondary nucleation and accessible surface in insulin amyloid fibril formation.
2008
At low pH insulin is highly prone to self-assembly into amyloid fibrils. The process has been proposed to be affected by the existence of secondary nucleation pathways, in which already formed fibrils are able to catalyze the formation of new fibrils. In this work, we studied the fibrillation process of human insulin in a wide range of protein concentrations. Thioflavin T fluorescence was used for its ability to selectively detect amyloid fibrils, by mechanisms that involve the interaction between the dye and the accessible surface of the fibrils. Our results show that the rate of fibrillation and the Thioflavin T fluorescence intensity saturate at high protein concentration and that, surpr…
Tuning the selectivity of molecularly imprinted polymer extraction of arylcyclohexylamines: From class-selective to specific
2020
Abstract A molecularly imprinted polymer (MIP) has been prepared in presence of 3-hydroxy phencyclidine (3-OH PCP) as template by bulk polymerization using N,N-dimethylformamide, as porogenic solvent, for the selective solid-phase extraction (SPE) of arylcyclohexylamines from oral fluids. Experimental variables of the extraction procedure have been studied in order to increase both, extraction recovery of 3-OH PCP, used as model analyte, and imprinting factor. By modifying the composition of the washing solvent, the selectivity of the MIP extraction procedure can be tuned, moving from an arylcyclohexylamine selective method to a 3-OH PCP specific method. The applicability of the synthesized…
In tube-solid phase microextraction-nano liquid chromatography: Application to the determination of intact and degraded polar triazines in waters and…
2017
Abstract In-tube solid-phase microextraction (IT-SPME) coupled to miniaturized liquid chromatography (LC) techniques are attractive mainly due to the column efficiency improvement, sensitivity enhancement and reduction of solvent consumption. In addition, the nanomaterials based sorbents can play a key role in the improvement of the extraction efficiency taking into account their interesting physical and chemical properties. Thus, in this work the performance of IT-SPME coupled to nano LC (NanoLC) has been compared with the performance of IT-SPME coupled to capillary LC (CapLC) with similar configurations for the determination of polar triazines including their degradation products. In both…
Prediction of the chemiluminescent behavior of pharmaceuticals and pesticides.
2001
The present paper deals with the first attempt to apply molecular connectivity calculations to predict a chemical property with analytical usefulness: the chemiluminescent behavior of substances when reacted with common oxidants in a liquid phase. Preliminary evidence when searching for new direct CL methods consisted of the examination of analyte reaction with a wide range of oxidants and media. This task, which results in time-consuming and trial-and-error expensive procedures, is necessary due to ensure empirical or theoretical rules for CL prediction are available. On the other hand, in quantitative structure-activity relationship studies, molecular connectivity is a topological method …