Search results for "refrigerator"
showing 10 items of 18 documents
Direct measurements of electron thermalization in Coulomb blockade nanothermometers at millikelvin temperatures
1998
Abstract We investigate electron thermalization of tunnel junction arrays installed in a powerful dilution refrigerator whose mixing chamber can produce lattice temperatures down to 3 mK. The on-chip Coulomb blockade thermometers (CBT) against other thermometers at the mixing chamber provide direct information on the thermal equilibrium between the electronic system and the refrigerator. We can detect and discriminate between the heat load delivered through the wiring and that produced by the bias current of the CBT-measurement. The basic heat leak limits the minimum of the electronic temperature to slightly below 20 mK.
Helium gas pressure cell for pressures up to 1 kbar (0.1 GPa) in conjunction with the cold head of a closed-cycle He refrigerator
1997
A helium gas pressure cell for pressures up to 1 kbar (0.1 GPa) has been developed in conjunction with a closed-cycle He refrigerator allowing variable temperatures between 15 and 300 K. Both cell and refrigerator are equipped with optical windows suitable for photophysical measurements, such as temperature- and pressure-dependent absorption spectroscopy or laser flash photolysis. Examples of measurements on iron(II) spin-crossover systems are given. In these compounds, comparatively small external pressures induce significant changes in the thermodynamic equilibrium as well as in the relaxation dynamics.
High-frequency filtering for low-temperature thermal transport studies in nanostructures
2012
Filtering of external unwanted RF-noise and thermal noise generated at the high-temperature parts of the measuring circuit is essential for successful measurements of thermal transport of nanostructures at low temperatures. This is because of thermal decoupling of the systems, i.e. the extreme weakness of thermal conduction at sub-Kelvin temperatures, leading easily to overheating even with excess power in sub pW range. We have started to improve the noise filtering in our cryogenic dilution refrigerators, which can reach a base temperature of ~ 50 mK. The miniature low-pass filters were made from special RF sealing compound Eccosorb CR124, stainless steel powder of grain size 50 micrometer…
Superconducting tunnel junction fabrication on three-dimensional topography based on direct laser writing
2020
Superconducting junctions are widely used in a multitude of applications ranging from quantum information science and sensing to solidstate cooling. Traditionally, such devices must be fabricated on flat substrates using standard lithographic techniques. In this study, we demonstrate a highly versatile method that allows for superconducting junctions to be fabricated on a more complex topography. It is based on maskless direct laser writing and two-photon lithography, which allows writing in 3D space. We show that high-quality normal metal–insulator–superconductor tunnel junctions can be fabricated on top of a 20-lm-tall three-dimensional topography. Combined with conformal resist coating m…
A measurement methodology for monitoring a CHCP pilot plant for an office building
2003
Abstract In Mediterranean areas, climate conditions determine quite equal demand both for thermal and cooling energy. The possibility to convert a cooling demand in thermal one through an absorption chiller allows to extend widely the number of running hours of a cogeneration plant. A trigeneration pilot plant for two office building is described, in which an integrated lay-out includes a NG prime mover with heat exchanger, an absorption chiller and a reversible heat pump. The pilot plant is completed and pre-running test were performed. Different fluid dynamics parameters will be monitored, in order to build the actual cumulative curve for thermal power. The measurement methodology is also…
Efficient Peltier refrigeration by a pair of normal metal/ insulator/superconductor junctions
1995
We suggest and demonstrate in experiment that two normal metal /insulator/ superconductor (NIS) tunnel junctions combined in series to form a symmetric SINIS structure can operate as an efficient Peltier refrigerator. Specifically, it is shown that the SINIS structure with normal-state junction resistances 1.0 and 1.1 k$\Omega$ is capable of reaching a temperature of about 100 mK starting from 300 mK. We estimate the corresponding cooling power to be 1.5 pW per total junction area of 0.8 $\mu$m$^2$ at $T= 300$ mK.
Pumped helium system for cooling positron and electron traps to 1.2 K
2011
Abstract Extremely precise tests of fundamental particle symmetries should be possible via laser spectroscopy of trapped antihydrogen ( H ¯ ) atoms. H ¯ atoms that can be trapped must have an energy in temperature units that is below 0.5 K—the energy depth of the deepest magnetic traps that can currently be constructed with high currents and superconducting technology. The number of atoms in a Boltzmann distribution with energies lower than this trap depth depends sharply upon the temperature of the thermal distribution. For example, ten times more atoms with energies low enough to be trapped are in a thermal distribution at a temperature of 1.2 K than for a temperature of 4.2 K. To date, H…
A single stage adiabatic demagnetization refrigerator for testing x-ray microcalorimeters
2004
A single stage Adiabatic Demagnetization Refrigerator (ADR), has been set-up at the X-ray Astronomy Calibration and Testing (XACT) facility of INAF - Osservatorio Astronomico di Palermo G.S. Vaiana, for the development and testing of cryogenic X-ray detectors for laboratory and astrophysical applications. The ADR allows to cool detectors at temperatures below 40 mK and to maintain them at constant operating temperature for many hours. We describe the design and construction of the ADR and present test results and performances.
A Validation Methodology for a Combined Heating Cooling and Power (CHCP) Pilot Plant
2004
A great number of variables significantly influence the energetic, environmental and economic results of CHP (Combined Heating and Power) and CHCP (Combined Heating Cooling and Power) plants operation, and as a consequence their project activity is rather complex. In order to select the best layout and properly size the machines, detailed data on hourly electric, thermal, and cooling demand are necessary, so that a series of plant life cycle simulations may have to be carried out. Unfortunately, such detailed data are rarely available, because energy consumptions data for existing buildings are usually derived from aggregated monthly or bimonthly gas and electricity bills. Even more difficu…
Experimental characterization of a novel configuration of thermoelectric refrigerator with integrated finned heat pipes
2021
Abstract Thermoelectric refrigerating systems (TER) are environment-friendly technologies. They have several advantages such as low maintenance costs, are less cumbersome and long lifetime. However, these systems have low coefficient of performance and are limited in achieving low temperature levels. This study investigates a new configuration of TE refrigerator employing a novel arrangement of heat sinks with integrated flat and finned heat pipes. A mathematical model is firstly developed to predict transient temperatures and cooling limit time. An experimental characterization is then performed and it includes optimization of energy consumption, cooling time, temperature levels and TE ref…