Search results for "resin"
showing 10 items of 385 documents
Thermal Stability and Flame Retardancy of Polypropylene Composites Containing Siloxane-Silsesquioxane Resins
2018
A novel group of silsesquioxane derivatives, which are siloxane-silsesquioxane resins (S4SQ), was for the first time examined as possible flame retardants in polypropylene (PP) materials. Thermal stability of the PP/S4SQ composites compared to the S4SQ resins and neat PP was estimated using thermogravimetric (TG) analysis under nitrogen and in air atmosphere. The effects of the non-functionalized and n-alkyl-functionalized siloxane-silsesquioxane resins on thermostability and flame retardancy of PP materials were also evaluated by thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR) and by cone calorimeter tests. The results revealed that the functionalized S4SQ resins may for…
Cariostatic effect of a light-cured, resin-reinforced glass-ionomer for bonding orthodontic brackets in vivo
1998
The aim of this study was to evaluate in vivo the cariostatic potential of the resin-reinforced glass-ionomer (Vitremer core build-up restorative; 3M Dental Product Division) when used as a bonding agent for orthodontic brackets. The mineral distribution and topography of the enamel surface adjacent to the bracket base was determined by quantitative microradiography (TMR) and confocal laser scanning microscopy (CLSM). The study was designed in split-mouth technique using 9 pairs of premolars to be extracted for orthodontic reasons. One tooth of each pair was bonded with the resin-reinforced glass-ionomer, and the control contralateral premolar with the non-fluoridated composite (Concise, 3M…
Minimal exposure time of different LED-curing devices
2007
Abstract Objectives The purpose of the study was to investigate the shortest possible exposure time of different LED-curing devices for five different resin composites in a clinically relevant in vitro-model, where a 7 mm distance from the light guide tip to the bottom side of the cavity was compiled. Methods Resin composite samples (Tetric EvoCeram A3, Filtek Supreme XT A3B, Premise A3, CeramX Mono M5, QuiXfil) were filled in three increments of 2 mm thickness each in stainless steel moulds (O = 5 mm, h = 6 mm, n = 9). The samples were incrementally exposed to different blue LED-curing devices (Bluephase, Bluephase C8, Bluephase 16i/Ivoclar Vivadent, L.E.Demetron II/sds Kerr, Elipar Free…
A tooth whitening and chemical abrasive protocol for the treatment of developmental enamel defects
2018
Abstract This clinical report describes a chemical abrasive protocol and whitening techniques to quantify modifications to the color and volume produced when eliminating white spots associated with developmental defects in enamel. Chemical (oxidative-erosive) abrasive treatment (whitening + 6.6% hydrochloric acid) resolves white spots up to a depth of 0.2 mm. At greater depths, infiltration with 16% hydrochloric acid followed by composite resin infiltration is recommended.
Effect of addition of Nano hydroxyapatite particles on wear of resin modified glass ionomer by tooth brushing simulation
2016
Background Recently, incorporation of nanohydroxyapatite (NHA) has been suggested to improve the mechanical properties of glass ionomers (GIs). This study aimed to assess the effect of addition of NHA on wear of resin modified glass ionomer (RMGI) by tooth brushing simulation. Material and Methods In this in vitro, experimental study, NHA in 1, 2, 5, 7 and 10wt% concentrations was added to Fuji II LC RMGI powder, and 48 samples (5×5mm) in five experimental and one control group (n=8) were fabricated. After polishing, cleaning and incubation at 37°C for three weeks, the samples were weighed and subjected to tooth brushing simulation in a toothpaste slurry according to ISO14569-1. Then, they …
Photoelastic stress analysis assisted evaluation of fracture toughness in hydrothermally aged epoxies
2014
The present work has investigated the fracture toughness of a model DGEBA epoxy system subject to Hidro-Thermal aging. A Photoelastic Stress Analysis technique has been implemented, showing the evolution of stresses arising throughout the water uptake process due to the non-uniform swelling of the material. Gravimetric and Dynamic Mechanical Thermal Analyses have further complemented the characterization, showing the onset of plasticization effects with aging. The correlation of all previous characterizations has allowed to conclude that an increase of KIC fracture toughness is obtained at the fully saturated condition. In particular Photoelasticity has also revealed the onset of relevant s…
Phytochemical and anti-staphylococcal biofilm assessment of Dracaena draco L. Spp. draco resin
2013
Background: Dracaena draco L. ssp. draco is known as the “dragon's blood tree” and it is endemic from the Canary Islands and Morocco. Objective: Carry out phytochemical investigation of acetonic extracts of red resin obtained from the trunk of D. draco, to obtain to the isolation of the most abundant resin constituents, belonging to the class of flavonoids: flavans, along with homoisoflavans and homoisoflavanones. Materials and Methods: The structures of the isolated compounds were established by Nuclear Magnetic Resonance (NMR) and mass spectrometry data and comparison with literature data. The acetonic extract was evaluated for its anti-staphylococcal properties against two reference stra…
Multilayer capsules: a promising microencapsulation system for transplantation of pancreatic islets
2001
In 1980, Lim and Sun introduced a microcapsule coated with an alginate/polylysine complex for encapsulation of pancreatic islets. Characteristic to this type of capsule is, that it consists of a plain membrane which is formed during a single procedural step. With such a simple process it is difficult to obtain instantly a membrane optimized with respect to all the properties requested for islet transplantation. To overcome these difficulties, it is recommended to build up the membrane in several consecutive steps, each optimized for a certain property. In this study, we have analysed such a multilayer microcapsule for the encapsulation of pancreatic islets. Therefore, empty and islet contai…
A free plate model can predict guided modes propagating in tubular bone-mimicking phantoms
2014
The goal of this work was to show that a non-absorbing free plate model can predict with a reasonable accuracy guided modes measured in bone-mimicking phantoms that have circular cross-section. Experiments were carried out on uncoated and coated phantoms using a clinical axial transmission setup. Adjustment of the plate model to the experimental data yielded estimates for the waveguide characteristics (thickness, bulk wave velocities). Fair agreement was achieved over a frequency range of 0.4 to 1.6 MHz. A lower accuracy observed for the thinnest bone-mimicking phantoms was caused by limitations in the wave number measurements rather than by the model itself.
Efecto de la estimulación multipunto del ventrículo izquierdo en la terapia de resincronización cardíaca sobre la asincronía y la contractilidad mioc…
2018
Introducción La terapia de resincronización cardíaca (TRC) ha demostrado ser capaz de reducir la morbilidad y la mortalidad en pacientes con insuficiencia cardíaca, mala función ventricular izquierda y un QRS ensanchado. Desafortunadamente hasta un 20% de los pacientes no responden a esta terapia. Parte de los casos de no respuesta a la TRC son atribuibles a la corrección incompleta de la asincronía ventricular existente. Se ha postulado que la estimulación simultanea desde varios puntos del ventrículo izquierdo (VI) puede capturar una mayor masa miocárdica y reducir el tiempo de activación ventricular y, por tanto la asincronía. Hipótesis. La TRC realizada mediante estimulación multipunto …