Search results for "scanning"
showing 10 items of 1808 documents
Reaction Sequence in the Preparation of NiAl2O4 Spinel-Mullite Composites by Sol-Gel
2005
NiAl 2 O 4 spinel-mullite composites were prepared by simultaneous replacement of Al by Ti and/or Ni in 3:2 stoichiometric mullite. Specimens having nominal compositions 3(Al 2-2x Ni x Ti x O 3 ).2SiO 2 (x = 0, 0.025, 0.05, 0.2) and 3(Al 2-x M x O 3) .2SiO 2 (M = Ni 2+ or Ti 4+ and x = 0.05) were synthesized by sol-gel techniques, which provide homogeneous gels in the SiO 2 -Al 2 O 3 system. Gel structures investigated by infrared (IR) spectroscopy revealed the formation of Al-O-Si bonds in dried gels. The reaction sequence of gel-derived glasses, previously obtained by preheating gels at 750°C for 3 h, was evaluated by X-ray powder diffraction (XRD) and ultraviolet-visible (UV-vis) spectro…
Formation of layered titania and zirconia catalysed by surface-bound silicatein
2005
Silicatein immobilised on self-assembled polymer layers using a histidine-tag chelating anchor group retains its hydrolytical activity for the formation of biosilica, and catalyses the formation of layered arrangements of biotitania and biozirconia.
Characterisation of beam focus quality in biomedical nuclear microscopy: A Fourier optics approach
2009
Abstract The central peak widths of the 2D-autocorrelation function have been investigated as a Figure of Merit (FoM) of focus quality in nuclear microscopy using a quadrupole triplet lens system. The beam focus could be reliably characterised for direct scanning transmission ion microscopy (direct-STIM) images obtained with fluences as small as 5.8 × 10 9 ions cm - 2 which colocalisation tests showed did not introduce significant beam-induced changes in the cells.
Color centers and nanodefects in LiF crystals irradiated with 150MeV Kr ions
2012
Abstract The modifications of structure, optical and nano-mechanical properties of LiF crystals after irradiation with 150-MeV Kr +14 ions at a fluence of 6 × 10 12 ions cm −2 have been studied using optical absorption spectroscopy, scanning electron and atomic force microscopy, and nanoindentation. Optical spectroscopy shows the saturation of F centers and a comparatively high number of F n centers. AFM and SEM imaging reveals a nanostructured region with columnar nanocrystallites (size 30–90 nm). Nanostructuring occurs in depths up to 10 μm, where the ion energy loss surpasses a critical threshold of about 10 keV/nm. At a lower energy loss a zone enriched with dislocations is observed. S…
High magnification SEM observations for two types of granularity in a high burnup PWR fuel rim
1998
Abstract Rim microstructure of an UO2 pellet irradiated up to 61 GWd/tU, observed with high magnification scanning electron microscopy, presented two types of subgrains: polyhedral and round subgrains. Round subgrains were also observed on the surface of fabrication pores along the pellet radius. These round-shaped subgrains seem to be associated to free surface rearrangement. This new type of round subgrains was proved to be independent of the rim effect. Observations of the fuel structure in the vicinity of rim area evidenced two types of defects specific to rim effect: planar defects and small intergranular pores. Hypothesis is made that the accumulation of planar defects could generate …
Structural changes and distribution of accumulated tritium in the carbon based JET tiles
2011
Abstract In this study the tritium distribution and the effect of structural changes thereon have been analyzed in the bulk of the tile selected from the JET Mark II SRP divertor. Tritium content has been analyzed by the full combustion technique [1] . The structure has been investigated by the method of Scanning Electron Microscopy. Tritium depth profiles have been measured at different poloidal positions. A high specific activity of tritium (up to 156 MBq g −1 ) was found at the plasma-facing surface. At some tile positions up to 98–99% of the T can be in the surface slice of 1 mm thickness, whereas in other poloidal positions there can be more T in the bulk than at the surface. The struc…
Growth of osteoblasts on lithographically modified surfaces
2007
Here we report about preliminary investigations on developing substrates for culturing osteoblasts, the cells responsible for production of mineralised bone, by lithographically modifying the surfaces of several materials. The proton beam writing system at the National University of Singapore was used to fabricate high aspect ratio structures in PMMA, while two-dimensional low aspect ratio structures were fabricated using conventional electron beam lithography (EBL) and UV lithography (UVL) in SU-8. It was found that oxygen plasma treatment of structured SU-8 surfaces changed the surface layer and significantly improved cell attachment and proliferation. Cells grown on patterned thick PMMA …
Rare Earth Activated Oxyfluoride Glasses and Glass-Ceramics for Scintillation Applications
2012
Oxyfluoride glasses 49SiO2·6Al2O3·24Li2O·20LaF3 activated with Tb, Ce, Eu have been synthesized and studied. After heating at 580°C and 750°C crystalline phases were obtained. The samples were studied by DTA (Differential thermal analyzer), CL (cathodoluminescence), XRD (X-ray diffraction), SEM (scanning electron microscope), EDS (energy dispersive x-ray spectroscopy) methods. We found out that presence of crystalline phase enhances the CL of Tb activated samples significantly; whereas, the shortest decay time of 0.29 μs has been observed for less intense Ce doped glass sample.
ODS ferritic steels obtained from gas atomized powders through the STARS processing route: Reactive synthesis as an alternative to mechanical alloying
2018
Authors acknowledge ALBA synchrotron (Spain) for the provision of beamtime on the beam line BL22-CLAESS (Proposal 2016081797). Transmission electron microscopy observations were accomplished at Centro Nacional de Microscopía Electrónica, CNME-UCM. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Financial support from Basque Government through the ELKARTEK ACTIMAT 2016 project is also acknowledged.
Preliminary corrosion studies of P-91 in flowing lead–lithium with and without magnetic field for Indian lead–lithium ceramic breeder test blanket mo…
2014
To study the corrosion of P-91 (9% chromium and 1% molybdenum) material with lead–lithium (Pb–Li) eutectic, two experiments were carried out in a forced convection loop, at eutectic temperature of 550 °C. The first experiment was carried out at a velocity of 15 cm s−1 for 1000 h and the second experiment, at a velocity of 30 cm s−1 for 2700 h. In both the experiments, P-91 sample coupons were exposed to Pb–Li flow in the presence and absence of magnetic field. Samples were analyzed using an optical microscope, scanning electron microscope (SEM) and electron probe micro-analyzer (EPMA). Micro-Vickers hardness testing was also carried out. Dissolution of elements into liquid metal is the main…