Search results for "scanning"
showing 10 items of 1808 documents
Durability of Basalt/Hemp Hybrid Thermoplastic Composites
2019
The Achilles heel of thermoplastic natural fibre composites is their limited durability. The environmental degradation of the mechanical properties of hemp and hemp/basalt hybrid-reinforced high-density polyethylene (HDPE) composites has been investigated with a special focus on the effects of water ageing and accelerated ageing, including hygrothermal and UV radiation. Modification of the matrix was carried out using a maleic anhydride high-density polyethylene copolymer (MAPE) as a compatibilizer. Hybridization of hemp fibres with basalt fibres and the incorporation of MAPE were found to significantly decrease the water uptake (up to 75%) and increase the retention of mechanical propertie…
Protection of active aroma compound against moisture and oxygen by encapsulation in biopolymeric emulsion-based edible films.
2008
International audience; Edible films made of ι-carrageenans display interesting advantages: good mechanical properties, stabilization of emulsions, and reduction of oxygen transfers. Moreover, the addition of lipids to ι-carrageenan-based films to form emulsified films decreases the transfer of water vapor and can be considered to encapsulate active molecules as flavors. The aim of this study was to better understand the influence of the composition and the structure of the carrageenan-based film matrices on its barrier properties and thus on its capacity to encapsulate and to protect active substances encapsulated. Granulometry, differential scanning calorimetry, and Fourier transform infr…
Kinetic parameters of a cyanate ester resin catalyzed with different proportions of nonylphenol and cobalt acetylacetonate catalyst
2005
The isothermal cure of a dicyanate ester monomer has been investigated by differential scanning calorimetry (DSC) in the presence of different quantities of a catalyst system formed by nonylphenol (NP) and cobalt (II) acetylacetonate (Co(AcAc)2). Two sets of experiences were studied. Firstly, the NP composition was varied from 0 to 10 per hundred resin (phr) and secondly, the Co(AcAc)2 loadings were changed at 2 phr of NP. It has been observed that the cyanate conversion increases significantly after the first addition of the metal catalyst and, also, at the same time the thermal stability improves. Moreover, the kinetic data have been fitted with a second-order equation respect to the cyan…
Morphology and thermal behavior of dicyanate ester-polyetherimide semi-IPNS cured at different conditions
2000
A high-temperature thermosetting bisphenol-A dicyanate, BADCy was modified with polyetherimide, PEI, at various compositions. Phase separation and rheokinetics through curing were studied by optical microscopy, dynamic and isothermal differential scanning calorimetry, and rheological measurements. The PEI phase separated at the early stages of curing, well before gelation, and did not affect the polycyclotrimerization kinetics. The phase structure and thermal properties of the final network were investigated as a function of the PEI content and cure temperature. For this purpose, dynamic mechanical analysis, scanning electron microscopy studies, and thermogravimetrical analysis were carried…
Water-soluble and redox-responsive hyperbranched polyether copolymers based on ferrocenyl glycidyl ether
2015
Water-soluble copolymers of ferrocenyl glycidyl ether (fcGE) and glycidol were prepared via anionic ring-opening multibranching polymerization (ROMBP). The resulting hyperbranched materials with molecular weights (Mn) of 3500 to 12 300 g mol−1 and relatively narrow molecular weight distributions (Mw/Mn = 1.40–1.69) exhibit both temperature- as well as redox-responsive behavior, which was studied via turbidity measurements. The cloud point temperatures (Tc) were adjusted between 45 and 60 °C through variation of the fcGE comonomer content. Additionally, these Tcs can be increased by the addition of an oxidizing agent. The extent of oxidation of the materials was quantified by Mosbauer spectr…
A Challenging Comonomer Pair: Copolymerization of Ethylene Oxide and Glycidyl Methyl Ether to Thermoresponsive Polyethers
2014
Motivated by the oxygen-rich and fully amorphous structure of poly(glycidyl methyl ether) (PGME), a series of thermoresponsive poly(glycidyl methyl ether-co-ethylene oxide) copolymers P(GME-co-EO) with molecular weights in the range of 3000–20 000 g mol–1 were synthesized by the activated monomer polymerization technique. Tetraoctylammonium bromide (NOct4Br) was employed as an initiator in combination with triisobutylaluminum (i-Bu3Al) as a catalyst under mild conditions. Polyethers with varying GME content between 31 and 100 mol % were obtained. Triad sequence analysis using 13C NMR spectroscopy proved that no pronounced block structure was obtained. Differential scanning calorimetry (DSC)…
In situ forming hydrogels of hyaluronic acid and inulin derivatives for cartilage regeneration.
2014
An in situ forming hydrogel obtained by crosslinking of amino functionalized hyaluronic acid derivatives with divinylsulfone functionalized inulin (INU-DV) has been here designed and characterized. In particular two hyaluronic acid derivatives bearing respectively a pendant ethylenediamino (EDA) portion (HA-EDA) and both EDA and octadecyl pendant groups (HA-EDA-C18) were crosslinked through an azo-Michael reaction with INU-DV. Gelation time and consumption of DV portions have been evaluated on hydrogel obtained using HA-EDA and HA-EDA-C18 derivatives with a concentration of 3% w/v and a ratio 80/20 w/w respect to the crosslinker INU-DV. The presence of pendant C18 chains improves mechanical…
Plasma Polymer Membranes for Immobilising Metalloporphyrins
2013
Atmospheric pressure dielectric barrier discharge formation of organosilicon thin films loaded with zinc 5,10,15,20-tetraphenylporphyrin (Zn(TPP)) was investigated for different deposition conditions. UV–visible spectroscopy and scanning electron microscopy revealed the effects of the metalloporpyhrins injection parameters and the plasma polymerisation conditions can affect the dispersion of the metalloporphyrins and the morphology of the coatings. The stability of the embedded Zn(TPP) molecules was investigated by orbitrap mass spectrometry.
Spherulite formation in a ?noncrystalline? two-dimensional hydrogen-bond assembly
1996
4-Urazoyl benzoic acid groups 1 are attached as terminal end group to an oligoisobutene. According to wide-angle X-ray scattering the material is amorphous. Differential scanning calorimetry, small-angle X-ray scattering, transmission electron microscopy, and polarizing microscopy show that the polar head groups form ordered two-dimensional assemblies which organize into spherulites. Temperature-dependent SAXS measurements and the d.s.c. analysis give a close insight into the order-disorder (“melting”) process of the two-dimensional clusters which form macroscopic spherulites. The order-disorder transition of the clusters is closely related to the dynamics and order of the polyisobutene cha…
Aroma behaviour during steam cooking within a potato starch-based model matrix.
2012
To help understand the organoleptic qualities of steam cooked foods, the kinetics of aroma release during cooking in a potato starch based model matrix was studied. Behaviour of components having a major impact in potato flavour were studied using solid phase micro extraction-gas chromatography (SPME-GC). Evolution of microstructure of potato starch model-matrix during steam cooking process was analyzed using environmental scanning electron microscopy (ESEM). Both aroma compounds that are naturally present in starch matrix and those that were added were analyzed. Both the aroma compounds naturally presented and those added had different behaviour depending on their physico-chemical properti…