Search results for "solution"
showing 10 items of 5638 documents
The effect of pressure on the liquid–liquid phase equilibrium of two polydisperse polyalkylsiloxane blends
2002
The effect of pressure-induced immiscibility in polymer blends is investigated by experimental and theoretical methods. Experimental data of cloud point curves and critical points are obtained by turbidity measurements. The chosen system is a mixture of polydimethylsiloxane and polyhexylmethylsiloxane which is one of the very few polymer blends exhibiting pressure-induced immiscibility. This unusual behaviour is related to a critical temperature minimum of the critical curve and cloud point isopleths at positive pressure in the temperature–pressure diagram. The effect of the chain length on the critical temperature minimum is investigated here based on theoretical models. The effect of diff…
Quick and reliable routes to phase diagrams for polyethersulfone and polysulfone membrane formation
2000
Phase diagrams were measured and calculated for the ternary membrane forming systems DMF/water/polysulfone and DMF/water/polyethersulfone at different temperatures. Customary experiments yielded cloud point curves, tie lines, and critical compositions. The theoretical computation starts from the Flory-Huggins theory and employs binary interaction parameters g ij that vary with the composition. This information was mainly obtained by means of Headspace-Gas Chromatography (HSGC, yielding the partial pressures of the volatile components); these data were complemented by light scattering and swelling experiments. The calculation of binodals, spinodals, tie lines, and critical points avoids the …
Polydispersity effects on the phase diagram of the system chloroform/poly-l-(lactic acid)/poly(methyl methacrylate) and morphology of PLA/PMMA films
2000
Abstract Cloud point curve, critical composition and several critical coexistence curves were measured at 25°C for the ternary system poly- l -(lactic acid) (PLA), poly(methyl methacrylate) (PMMA) — where both polymers exhibit broad molecular weight distributions — and the common solvent chloroform. In contrast to the situation encountered in the absence of the second polymer both branches of the critical coexistence curves are located without any doubt inside the miscibility gap as defined by the cloud point curve. This unexpected experimental finding is corroborated by model calculations on the basis of continuous thermodynamics. The removal of solvent from the ternary mixtures yields fil…
Shear Effects on the Phase Diagrams of Solutions of Highly Incompatible Polymers in a Common Solvent. 1. Equilibrium Behavior and Rheological Propert…
1997
Phase diagrams (cloud points, tie lines, critical compositions) and viscosities of homogeneous solutions were determined at temperatures ranging from 20 to 100 °C for three representatives of the ternary system cyclohexanone/polystyrene/poly(n-butyl methacrylate) [CHO/PS/PBMA] in preparation of a study on shear influences. An only moderate increase of the two-phase region observed upon heating (LCST behavior) witnesses little heat effects upon mixing. Tie lines which are nearly parallel to the PS/PBMA edge of the Gibbs phase triangle indicate comparable solvent quality of CHO for both polymers. The quantitative mathematical description of the equilibrium behavior-required for a theoretical …
Amphiphilic derivatives of a polyaspartamide: their aggregation and solubilization ability
2006
Abstract The self-aggregation and solubilization capability of a series of amphiphilic copolymers obtained by derivatisation of polymeric chain of α,β-poly(N-2-hydroxyethyl)- dl -aspartamide (PHEA) with polyethylene glycols (PEG, being different molecular weight 2000 or 5000 Da, PEG2000 and PEG5000, respectively) and/or hexadecylamine alkyl chain (C16), namely PHEA–PEG2000, PHEA–PEG5000, PHEA–C16, PHEA–PEG2000–C16 and PHEA–PEG5000–C16, have been evidenced by performing systematic tensiometric and spectrophotometric studies. All measurements have been performed at 25.0 °C over a wide copolymer concentration range. The tensiometric results have shown that, for all copolymers studied, the surf…
α,ω-Functionalized poly-N-isopropylacrylamides: controlling the surface activity for vesicle adsorption by temperature
2003
The synthesis of alpha,omega-end-functionalized copolymers of N-isopropylacrylamide and N-(3-dimethylaminopropyl)acrylamide was performed. Monomer ratios of 100:0, 96:4, and 81:19 were investigated. The lower critical solution temperature (LCST) of these polymers was determined by cloud-point measurements and by microcalorimetric measurements. The LCST increased from 32 over 37 to 47 degrees C as the hydrophobicity increased with increasing amount of comonomer N-(3-dimethylaminopropyl)acrylamide. The polymers could successfully be adsorbed onto gold surfaces. Finally, vesicle adsorption onto these self-assembled polymer films on flat gold surfaces was investigated as the vesicle solution te…
On what terms and why the thermodynamic properties of polymer solutions depend on chain length up to the melt
2003
Theoretical considerations based on chain connectivity and conformational variability of polymers have lead to an uncomplicated relation for the dependence of the Flory-Huggins interaction parameter, chi, on the volume fraction of the polymer, phi, and on its number of segments, N. The validity of this expression is being tested extensively by means of vapor pressure measurements and inverse gas chromatography (complemented by osmotic and light scattering data from literature) for solutions of poly(dimethylsiloxane) in the thermodynamically vastly different solvents n-octane (n-C8), toluene (TL), and methylethylketone (MEK) over the entire range of composition for at least six different mol…
Characterization of poly(N-alkylanilines) by Raman spectroscopy
2007
Abstract Thin films of poly( N -alkylaniline) were synthesized in acidic aqueous solution and in mixtures of aqueous and organic solvents. The polymer films (alkyl = methyl, ethyl, propyl and butyl) were characterized by Raman spectroscopy with the excitation wavelengths of 514.5, 632.8 and 780 nm. The main Raman bands have been characterized for the leucoemeraldine, emeraldine and pernigraniline oxidation states between −0.2 and 0.8 V (vs. Ag|AgCl). This fundamental study shows that the structure of the half-oxidized emeraldine form contains quinoid units, which supports the commonly accepted oxidation and reduction scheme of poly( N -alkylanilines).
Impedance spectroscopy characterization of functionalized alumina membranes
2005
Abstract Anodic alumina membranes have been impregnated with a protonic conductor either by immersion or by vacuum permeation of a saturated aqueous solution of CsHSO4 for different times. Synthetized salt, obtained through the reaction of cesium carbonate with sulphuric acid (in excess), contained a small quantity of Cs2SO4. Unmodified membranes consist of amorphous Al2O3 with a regular distribution of pores (average diameter: 200 nm) and are stable up to 850 °C. Long impregnation times caused partial dissolution of alumina, with formation of Al(HSO4)3 on the front surfaces as well as into pore walls. From the frequency dispersion of the impedance, the “macroscopic conductivity” of membran…
Not just size and shape: spherically symmetrical d5 and d10 metal ions give different coordination nets with 4,2′:6′,4″-terpyridines
2010
Functionalized 4,2′:6′,4″-terpyridine ligands have been used to provide a divergent N,N′-donor set for the formation of coordination polymers containing {Zn2(µ-OAc)4} or {Mn3(µ-OAc)4(OAc)2} scaffolds. Single-stranded coordination polymers are produced from the reactions of 4′-(4-bromophenyl)-4,2′:6′,4″-terpyridine (1) and 4′-(4-methylthiophenyl)-4,2′:6′,4″-terpyridine (2) with Zn(OAc)2·2H2O. In [Zn2(1)(OAc)4]n and [Zn2(2)(OAc)4]n, the two outer nitrogen donors of the 4,2′:6′,4″-terpyridine ligands, bind to the axial sites of {Zn2(µ-OAc)4} units to generate coordination polymer chains which are π-stacked so that the V-shaped ligand domains are interleaved. When Mn(OAc)2·4H2O is treated with …