Search results for "sulfide"
showing 10 items of 388 documents
Preliminary Results on the Use of Leather Chrome Shavings for Air Passive Sampling
2012
A new passive sampler based on low-density polyethylene (LDPE) layflat tube filled with chrome shavings from tannery waste residues was evaluated to determine volatile organic compounds (VOCs) in indoor and outdoor areas. VOCs were directly determined by head space-gas chromatography-mass spectrometry (HS-GC-MS) without any pretreatment of the sampler and avoiding the use of solvents. Limit of detection values ranging from 20 to 75 ng sampler−1and good repeatability values were obtained for VOCs under study with relative standard deviation values from 2.8 to 9.6% except for carbon disulfide for which it was 22.5%. The effect of the amount of chrome shavings per sampler was studied and resul…
Determination of sulfide in waters by flow-injection solid phase spectrophotometry
2000
A highly sensitive flow injection solid-phase spectrophotometric method was developed for the determination of sulfide in waters. The method is based on the formation of Methylene Blue (MB) by reaction between sulfide and N,N-dimethyl-p-phenylenediamine chloride in presence of Fe(III) in acidic medium. The MB formed was adsorbed on C18 bonded silica, located inside a laboratory-made flow cell, which was placed in the optical path of the spectrophotometer. Analyte retention and detection at 666 nm were performed simultaneously, followed by elution with a mixture of methanol and hydrochloric acid. Several variables of the system, such as amine concentration, acidity of the reaction medium, re…
CCDC 142834: Experimental Crystal Structure Determination
2001
Related Article: R.Broussier, E.Bentabet, M.Laly, P.Richard, L.G.Kuz'mina, P.Serp, N.Wheatley, P.Kalck, B.Gautheron|2000|J.Organomet.Chem.|613|77|doi:10.1016/S0022-328X(00)00501-5
Structural and elastic properties of defect chalcopyrite HgGa2S4 under high pressure
2014
In this work, we focus on the study of the structural and elastic properties of mercury digallium sulfide (HgGa2S4) at high pressures. This compound belongs to the family of AB(2)X(4) ordered-vacancy compounds and exhibits a tetragonal defect chalcopyrite structure. X-ray diffraction measurements at room temperature have been performed under compression up to 15.1 GPa in a diamond anvil cell. Our measurements have been complemented and compared with ab initio total energy calculations. The axial compressibility and the equation of state of the low-pressure phase of HgGa2S4 have been experimentally and theoretically determined and compared to other related ordered-vacancy compounds. The pres…
Reactions of azoesters and dimethyl acetylenedicarboxylate with 3-methyl-1,2,4-triazole-5-thione
1991
The addition of dimethyl acetylenedicarboxylate to 3-methyl-1,2,4-triazole-5-thione (1), both in alcoholic medium and in inert solvents, has been investigated. When 1 was allowed to react with diethyl azodicarboxylate a disulfide 5 was obtained.
A kinetic model for the oxidation of benzenethiol catalyzed by the [MoVIO2(O2CC(S)(C6H5)2)2]2− complex intercalated in a Zn(II)–Al(III) layered doubl…
2009
Abstract The heterogeneous oxidation of benzenethiol catalyzed by the dianionic bis(2-sulfanyl-2,2-diphenylethanoxycarbonyl) dioxomolybdate (VI) complex intercalated into a Zn(II)–Al(III) layered double hydroxide (LDH) host have been investigated under aerobic conditions. The kinetics of the system has been analysed in detail. In ethanol, the benzenethiol is cleanly oxidized to diphenyl disulfide in the acidic media provided by the protonic resin Amberlite IR-120(H). The reaction is second-order in benzenethiol, and the apparent rate coefficient has been found to be proportional to the catalyst weight and inversely proportional to the initial concentration of the substrate. A catalytic cycl…
Electrochemical Formation of 3,5-Diimido-1,2-dithiolanes by Dehydrogenative Coupling
2018
A synthetic approach to the cyclic disulfide moiety of 3,5-diimido-1,2-dithiolane derivatives starting with readily available precursors including the electrochemical coupling of dithioanilides is developed. The electrochemical key step provides sustainable synthetic access in high yields, using a very simple electrolysis setup.
Experimental sulphide inhibition calibration method in nitrification processes: A case-study.
2020
[EN] Sulphide is one of the inhibitors in the nitrification process in WWTP in regions with sulphate rich soils. As little information is currently available on sulphide nitrification inhibition, the aim of this study was to develop a method based on a modification of the Successive Additions Method to calibrate the effect of sulphide on the activity of ammonia-oxidising bacteria (AOB) and nitrite-oxidising bacteria (NOB). The developed method was then applied to activated sludge samples from two WWTPs with different influent sulphide concentrations. In both cases, sulphide had a greater inhibitory effect on NOB than AOB activity. The sulphide inhibition was found to be lower in the activat…
Stabilisation of MSWI bottom ash with sulphide-rich anaerobic effluent.
2007
Effluent of an anaerobic sulphate-reducing wastewater treatment process was used to stabilise bottom ash. The effect of stabilisation on the concentration and binding of Ca, P, S, Cu, Pb, Zn, As, Cr, and Mo were studied by comparing results of sequential extraction from fresh and stabilised bottom ash. The stabilisation treatment improved the retention of Ca, Cu, Pb, S, and Zn in bottom ash compared to a treatment with ion-exchanged water. In addition to retention, Cu, S, and Zn were accumulated from the anaerobic effluent in the bottom ash. Concentrations of As, Cr, and Mo remained on the same level, whereas leaching of P increased compared to control treatment with ion-exchanged water. Im…
Treatment of a submerged anaerobic membrane bioreactor (SAnMBR) effluent by an activated sludge system: the role of sulphide and thiosulphate in the …
2014
This work studies the use of a well-known and spread activated sludge system (UCT configuration) to treat the effluent of a submerged anaerobic membrane bioreactor (SAnMBR) treating domestic waste-water. Ammonia, phosphate, dissolved methane and sulphide concentrations in the SAnMBR effluent were around 55 mg NH4-N L-1, 7 mg PO4-P L-1, 30 mg non-methane biodegradable COD L-1, and 105 mg S2- L-1 respectively. The results showed a nitrification inhibition caused by the presence of sulphur compounds at any of the solids retention time (SRT) studied (15,20 and 25 days). This inhibition could be overcome increasing the hydraulic retention time (HRT) from 13 to 26 h. Among the sulphur compounds, …