Search results for "surface properties"
showing 10 items of 421 documents
A new biodegradable and biocompatible hydrogel with polyaminoacid structure
2007
The preparation and physicochemical and biological characterization of a novel polyaminoacid hydrogel have been reported. The ,-poly(N-2- hydroxyethyl)-dl-aspartamide (PHEA) has been used as a starting polymer for a derivatization reaction with methacrylic anhydride (MA) to give rise to the methacrylate derivative named PHM. Photocrosslinking of PHM has been performed in aqueous solution at 313 nm and in the absence of toxic initiators. PHM-based hydrogel has been characterized by scanning electron microscopy, X-ray diffractometry, swelling measurements in aqueous media; the degradation of PHM-based hydrogel has been evaluated as a function of time in the absence or in the presence of ester…
Non-cross-linked collagen type I/III materials enhance cell proliferation: in vitro and in vivo evidence
2014
Objective: To analyze Mucograft®(MG), a recently introduced collagen matrix, in vitro and in vivo, and compare it with BioGide®(BG), a well-established collagen membrane, as control. Material and Methods: A detailed analysis of the materials surface and ultra-structure was performed. Cellular growth patterns and proliferation rates of human fibroblasts on MG and BG were analyzed in vitro. In addition, the early tissue reaction of CD-1 mouse to these materials was analyzed by means of histological and histomorphometrical analysis. Results: MG showed a three-fold higher thickness both in dry and wet conditions, when compared to BG. The spongy surface of BG significantly differed from that of …
Supercritical carbon dioxide extraction of seed oil from yellow horn (Xanthoceras sorbifolia Bunge.) and its anti-oxidant activity
2010
Supercritical fluid carbon dioxide (SF-CO(2)) extraction (SFE) of seed oil from yellow horn and its anti-oxidant activity were investigated. The effects of CO(2) flow rate and particle size were firstly optimized, and a central composite design (CCD) combined with response surface methodology was used to study the effects of extraction pressure, temperature and time on the extraction yields. A maximal extraction yield of 61.28% was achieved under optimal conditions of extraction pressure 30 MPa at 45.68 degrees C, 2.08 h and CO(2) flow rate 12 kg/h with 0.5mm particle size. By analyzing the chemical composition of the seed oil, we found that the content of unsaturated fatty acids was approx…
In vivo comparison of a granular and putty form of a sintered and a non-sintered silica-enhanced hydroxyapatite bone substitute material
2019
Improved handling characteristics of bone substitute materials may facilitate surgical handling. However, the respective modifications should not alter the biological activity. For comparison of a ...
Cariostatic effect of a light-cured, resin-reinforced glass-ionomer for bonding orthodontic brackets in vivo
1998
The aim of this study was to evaluate in vivo the cariostatic potential of the resin-reinforced glass-ionomer (Vitremer core build-up restorative; 3M Dental Product Division) when used as a bonding agent for orthodontic brackets. The mineral distribution and topography of the enamel surface adjacent to the bracket base was determined by quantitative microradiography (TMR) and confocal laser scanning microscopy (CLSM). The study was designed in split-mouth technique using 9 pairs of premolars to be extracted for orthodontic reasons. One tooth of each pair was bonded with the resin-reinforced glass-ionomer, and the control contralateral premolar with the non-fluoridated composite (Concise, 3M…
Minimal exposure time of different LED-curing devices
2007
Abstract Objectives The purpose of the study was to investigate the shortest possible exposure time of different LED-curing devices for five different resin composites in a clinically relevant in vitro-model, where a 7 mm distance from the light guide tip to the bottom side of the cavity was compiled. Methods Resin composite samples (Tetric EvoCeram A3, Filtek Supreme XT A3B, Premise A3, CeramX Mono M5, QuiXfil) were filled in three increments of 2 mm thickness each in stainless steel moulds (O = 5 mm, h = 6 mm, n = 9). The samples were incrementally exposed to different blue LED-curing devices (Bluephase, Bluephase C8, Bluephase 16i/Ivoclar Vivadent, L.E.Demetron II/sds Kerr, Elipar Free…
Scrutiny of annexin A1 mediated membrane-membrane interaction by means of a thickness shear mode resonator and computer simulations.
2004
The dissipational quartz crystal microbalance (D-QCM) technology was applied to monitor the adsorption of vesicles to membrane-bound annexin A1 by simultaneously reading out the shifts in resonance frequency and dissipation. Solid-supported membranes (SSMs) composed of a chemisorbed octanethiol monolayer and a physisorbed 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoserine monolayer were immobilized on the gold electrode of a 5 MHz quartz plate. Adsorption and desorption of annexin A1 to the SSM was followed by means of the QCM technique. After nonbound annexin A1 was removed from solution, the second membrane binding was monitored by the D-QCM t…
Partially Reversible Adsorption of Annexin A1 on POPC/POPS Bilayers Investigated by QCM Measurements, SFM, and DMC Simulations
2005
The kinetics of annexin A1 binding to solid-supported lipid bilayers consisting of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoserine (POPS; 4:1) has been investigated as a function of the calcium ion concentration in the bulk phase. Quartz crystal microbalance measurements in conjunction with scanning force microscopy, fluorescence microscopy, and computer simulations indicate that at a given Ca2+ concentration annexin A1 adsorbs irreversibly on membrane domains enriched in POPS. By contrast, annexin A1 adsorbs reversibly on the POPC-enriched phase, which is composed of single POPS molecules embedded within a POPC matrix. The overall are…
Culturomic and quantitative real‐time ‐ polymerase chain reaction analyses for early contamination of abutments with different surfaces: A randomized…
2021
Background Rough and/or plasma-activated abutments seem to be able to increase soft tissue adhesion and stability; however, limited evidence is available about bacterial contamination differences. Purpose The aim was to investigate the oral microbiota on four dental abutments with different surfaces by quantitative real-time polymerase chain reaction (qRT-PCR) and culturomic approach. Methods Forty patients needing a single implant rehabilitation were involved in the study. Forty healing abutments, especially designed for the study, were divided into four groups according to the surface topography (1. machined [MAC], 2. machined plasma of argon treated [plasmaMAC], 3. ultrathin threaded mic…
Synthesis of Mesoporous Supraparticles on Superamphiphobic Surfaces
2015
A method for mesoporous supraparticle synthesis on superamphiphobic surfaces is designed. Therefore, supraparticles assembled with nanoparticles are synthesized by the evaporation of nanoparticle dispersion drops on the superamphiphobic surface. For synthesis, no further purification is required and no organic solvents are wasted. Moreover, by changing the conditions such as drop size and concentration, supraparticles of different sizes, compositions, and architectures are fabricated.