Search results for "ta215"
showing 10 items of 41 documents
Combustion Properties of Birch (Betula pendula) Black Liquors From Sulfur-Free Pulping
2016
Sulfur-free pulping has an environmental advantage over the traditional kraft process. This article describes the combustion properties of the black liquors produced from silver birch (Betula pendula) sawdust using three different cooking processes: two sulfur-free cooks (soda-anthraquinone and oxygen-alkali), and one reference kraft cook. It also considers the corresponding black liquors from an integrated forest biorefinery, in which a hot-water pretreatment of feedstock was performed prior to pulping. With the same cooking time, the total burning times for the sulfur-free black liquors were higher (15–55%) than those for the conventional kraft black liquors. However, no significant diffe…
Fast pyrolysis of hot-water-extracted and soda-AQ-delignified okra (Abelmoschus esculentus) and miscanthus (miscanthus x giganteus) stalks by Py-GC/MS
2018
Abstract The thermochemical behavior of various samples of okra ( Abelmoschus esculentus ) and miscanthus ( Miscanthus x giganteus ) stalks (initial, hot-water-extracted, and those from sulfur-free delignification) were studied by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). In all cases, major GC-amenable condensable products were measured semi-quantitatively and classified into several product groups. The formation of these product groups from different feedstock samples with varying mass portions of their structural constituents (carbohydrates and lignin) was investigated at 500 °C and 700 °C with a residence time of 5 s and 20 s. The main product groups were aliphatic comp…
Nano-magnetic potassium impregnated ceria as catalyst for the biodiesel production
2019
Abstract The main objective of this work comprises the investigation of biodiesel production from rapeseed oil using potassium impregnated Fe3O4-CeO2 nanocatalyst. The various concentration of potassium impregnated Fe3O4-CeO2 was screened for catalytic conversion of rapeseed oil to triglyceride methyl ester. The 25 wt % potassium impregnated Fe3O4-CeO2 nanocatalyst showed best biodiesel production. Nanocatalyst was characterized by FTIR, XRD, SEM, TEM, BET and Hammett indicator for basicity test. The characterization of biodiesel was performed with GC-MS, 1H and 13C NMR. Moreover, the optimum reaction parameters such as catalyst amount (wt %), oil to methanol ratio, reaction time and reacti…
Study of Ni, Pt, and Ru Catalysts on Wood-based Activated Carbon Supports and their Activity in Furfural Conversion to 2-Methylfuran
2018
Bio‐based chemicals can be produced from furfural through hydrotreatment. In this study, 2‐methylfuran (MF), a potential biofuel component, was produced with Pt, Ru, and Ni catalysts supported on wood‐based activated carbons. The catalytic hydrotreatment experiments were conducted in a batch reactor at 210–240 °C with 2‐propanol as solvent and 40 bar H2 pressure. Two types of activated carbon supports were prepared by carbonization and activation of lignocellulosic biomass (forest‐residue‐based birch and spruce from Finland). Both types of activated carbons were suitable as catalyst supports, giving up to 100 % furfural conversions. The most important factors affecting the MF yield were the…
Selective recovery of phosphorus as AlPO4 from silicon-free CFB-derived fly ash leachate
2018
The prospect of phosphorus (P) recovery from siliceous fly ash was investigated. The phosphorus content in the pristine fly ash was 1.21%. Obtaining pure phosphorus products from fly ash is very challenging because of high concentration of other elements, silicon (Si) at 17.3% being the major contaminant. The fly ash was fractionated with sieve size of 125 μm to concentrate the phosphorus in the small-size fraction, which also facilitated the removal of 78% of silica (Si) in the solid phase. The fractionated fly ash was treated with 8 M HCl in order to remove 98% of Si by aging (5 h) of leachate until precipitation of Si-gel, and a phosphorus-rich solution is obtained. Iron (Fe) is also con…
Generic Method for Modular Surface Modification of Cellulosic Materials in Aqueous Medium by Sequential Click-Reaction and Adsorption
2012
A generic approach for heterogeneous surface modification of cellulosic materials in aqueous medium, applicable for a wide range of functionalizations, is presented. In the first step, carboxymethyl cellulose (CMC) modified with azide or alkyne functionality, was adsorbed on a cellulosic substrate, thus, providing reactive sites for azide–alkyne cycloaddition click reactions. In the second step, functional units with complementary click units were reacted on the cellulose surface, coated by the click-modified CMC. Selected model functionalizations on diverse cellulosic substrates are shown to demonstrate the generality of the approach. The concept by sequentially combining the robust physic…
Towards controlling PCDD/F production in a multi-fuel fired BFB boiler using two sulfur addition strategies. Part II: Thermodynamic analysis
2014
Abstract A staged equilibrium process model was developed for a bubbling fluidized bed boiler firing SRF, bark and sludge. The model was used to study the influence of sulfur addition strategies (S-pellet additive and peat co-firing) on the behavior of copper, bromine, and alkalis. Aerosol samples collected from the backpass of the boiler were used to validate the chemistry predicted by the model. The model revealed that Cu existed as Cu 2 S (s3) in the reducing zone, and CuCl (g) (for all test cases) and CuO (s) (during peat co-firing) in the oxidation zones. CuBr 3(g) was also present after the introduction of tertiary air. However the model failed to predict the formation of CuSO 4 , an …
A comparative economic analysis of torrefied pellet production based on state-of-the-art pellets
2017
Abstract Torrefied pellets have fuel properties superior to those of conventional wood pellets and potentially allow greater rates of co-firing and thus larger reductions in net CO 2 emissions. Despite the growing amount of scientific output on torrefaction, the economic feasibility of torrefied pellet production is still a topic of considerable uncertainty. This is an obstacle for decision makers looking to implement sustainable energy policies. This paper compares the economics of torrefied pellets to conventional wood pellets. Working backwards from demonstrated pellet properties, this work attempts to answer the following question: Based on state-of-the-art torrefied pellets, what would…
Clean and Sustainable Biodiesel Production
2015
To date, the majority of world's primary energy is derived from fossil fuels. However, the fossil fuel recourses are in an inevitable decline as energy demand continues to grow exponentially with population growth, urbanization, and improved standards of living. Crude oil prices have recently risen several times and their current annual volatility exceeds 30%. The potential scarcity of fossil fuels has prompted a global search for alternative energy resources. Biodiesel fulfills the major requirements for production of alternative fuels such as feedstock availability, technical feasibility, and economic competitiveness. Together with other renewable biofuels, the use of biodiesel as a subst…
Optimizing the H3PO4 leaching conditions of post-precipitated sewage sludge using response surface methodology
2018
The leaching procedure of post-precipitated aluminium phosphate sludge with dilute phosphoric acid was developed. The leaching offers a route to recover both critical phosphorous from sewage sludge and the metal used in precipitation. Using phosphoric acid as leaching solution makes it possible to continue the recovery process without the need to remove chloride or sulfate anions. The optimization of the leaching was based on experimental three-level-four-variable central composite face-centered design. The four variables included were acid concentration, volume of acid, temperature and time of leaching. The leaching was conducted for dewatered and water-containing sludge (total solid conte…