Search results for "tensile"

Direct laser welding of pure titanium to austenitic stainless steel

2018

Abstract Direct butt joining of pure titanium to 316L stainless steel with continuous Yb:YAG laser was performed with variation of the beam offset from joint line. Mechanical properties of samples were evaluated by tensile tests and three-point flexural tests. The fractured surfaces and cross sections of welds were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). Tensile properties of welds were strongly determined by the beam offset from joint line and are well described by Weibull statistics. Ultimate tensile strength of 174 ± 69 MPa and ultimate flexural strength of 297 ± 48 MPa were obtained. Brittle fracture took place in…

Application of linear friction welding for joining ultrafine grained aluminium

2020

Abstract Ultrafine grained (UFG) materials are of great potential in industry due to their enhanced mechanical strength and other promising features, such as ability to superplastic deformation or excellent corrosion resistance. Nevertheless, one of the main limitations lies in their low thermal stability, which leads to excessive grain growth at elevated temperature. It influences mainly further processes performed at high temperature, such as joining. It causes detrimental problems during conventional fusion welding, as significant grain growth is observed and therefore the advantages as a result of small average grain size disappear. Therefore, the idea of applying solid state joining pr…

Aluminum to titanium laser welding-brazing in V-shaped grooveI

2017

International audience; Laser assisted joining of AA5754 aluminum alloy to T40 titanium with use of Al-Si filler wires was carried out. Continuous Yb:YAG laser beam was shaped into double spot tandem and defocalized to cover larger interaction zone in V shaped groove. Experimental design method was applied to study the influence of operational parameters on the tensile properties of the joints. Microstructure examination and fractography study were carried out to understand the relation between local phase content and fracture mode.Within defined window of operational parameters, statistically important factors that influenced the strength of T40 to AA5754 joints in V groove configuration w…

Procedure for a Temperature-Traffic Model on Rubberized Asphalt Layers for Roads and Railways

2017

The impact of temperature on the mechanical properties and thermal susceptibility of the railway bituminous sub-ballast layer, has served as motivation to develop the advanced measurement of thermal cycles in this layer and, an evaluation of the average seasonal temperatures interpolated by sinusoidal functions, of which characteristic parameters are determined. According to weather situation, Barber’s temperature model was used to prove the effectiveness for the railway superstructure. It is included the assessment of improved modified asphalt mixes performed with coarse rubber from scrap tires, having 1.5 to 3 percent of crumb rubber (particle size 0.2-4 mm) by weight of the total mix, as…

Morphogenetically-Active Barrier Membrane for Guided Bone Regeneration, Based on Amorphous Polyphosphate

2017

We describe a novel regeneratively-active barrier membrane which consists of a durable electrospun poly(ε-caprolactone) (PCL) net covered with a morphogenetically-active biohybrid material composed of collagen and inorganic polyphosphate (polyP). The patch-like fibrous collagen structures are decorated with small amorphous polyP nanoparticles (50 nm) formed by precipitation of this energy-rich and enzyme-degradable (alkaline phosphatase) polymer in the presence of calcium ions. The fabricated PCL-polyP/collagen hybrid mats are characterized by advantageous biomechanical properties, such as enhanced flexibility and stretchability with almost unaltered tensile strength of the PCL net. The pol…

2020

Orthodontic tooth movement (OTM) creates compressive and tensile strain in the periodontal ligament, causing circulation disorders. Hypoxia-inducible factor 1α (HIF-1α) has been shown to be primarily stabilised by compression, but not hypoxia in periodontal ligament fibroblasts (PDLF) during mechanical strain, which are key regulators of OTM. This study aimed to elucidate the role of heparan sulfate integrin interaction and downstream kinase phosphorylation for HIF-1α stabilisation under compressive and tensile strain and to which extent downstream synthesis of VEGF and prostaglandins is HIF-1α-dependent in a model of simulated OTM in PDLF. PDLF were subjected to compressive or tensile stra…

Structural Heteropolysaccharide Adhesion to the Glycocalyx of Visceral Mesothelium

2018

Bioadhesives are biopolymers with potential applications in wound healing, drug delivery, and tissue engineering. Pectin, a plant-based heteropolysaccharide, has recently demonstrated potential as a mucoadhesive in the gut. Since mucoadhesion is a process likely involving the interpenetration of the pectin polymer with mucin chains, we hypothesized that pectin may also be effective at targeting the glycocalyx of the visceral mesothelium. To explore the potential role of pectin as a mesothelial bioadhesive, we studied the interaction of various pectin formulations with the mesothelium of the lung, liver, bowel, and heart. Tensile strength, peel strength, and shear resistance of the bioadhesi…

A practical approach to estimate the degree of binder activity of reclaimed asphalt materials

2019

Using Reclaimed Asphalt (RA) in new asphalt mixtures can reduce the amount of new material required thereby saving money and natural resources. In addition, asphalt mixtures with RA have shown comparable properties and performance to that generally associated with asphalt mixtures made with 100% virgin material. However, RA content in pavement surface layers is still limited due to specification and technical limitations. For higher contents, the aged RA binder must be analysed to accurately determine the requirements for virgin binders and additives while the degree of blending (DOB) between the RA binder and the virgin binder also needs to be quantified. This is not a simple process and g…

Stress-strain analysis of specimens subjected to tensile loading during moisture uptake

2015

Abstract: A robust and efficient numerical method for the calculation of the internal stress state that develops within structures subjected to mechanical and steady state or transient hygroscopic loading conditions, has been developed. The method encompasses a layer by layer approach whereby the structure is discretised into plies with different material properties corresponding to the different ply moisture content. The proposed method has been validated against finite element solutions, and results from its application on a fully characterised EDT (technical name) polymer binder are presented. The impact of the moisture induced viscoelastic behaviour on the structural response of the cas…

Non-destructive automatic determination of aspect ratio and cross-sectional properties of fibres

2015

A novel method for computerised estimation of the aspect ratio distribution and various cross-sectional geometrical properties of fibres in short-fibre reinforced composites is proposed. The method, based on X-ray micro-computed tomography, is non-destructive and does not require user intervention. Based on results on specially fabricated model material, the accuracy and precision of the method seems adequate. The method is applied in analysing a manufacturing process of wood fibre reinforced thermoplastic composite. The results indicate a significant decrease of the aspect ratio of fibres during the processing steps. Finally, the feasibility of the method is assessed by estimating paramete…