Search results for "tensile"

Giant Mechanocaloric Effects in Fluorite-Structured Superionic Materials

2016

Mechanocaloric materials experience a change in temperature when a mechanical stress is applied on them adiabatically. Thus, far, only ferroelectrics and superelastic metallic alloys have been considered as potential mechanocaloric compounds to be exploited in solid-state cooling applications. Here we show that giant mechanocaloric effects occur in hitherto overlooked fast ion conductors (FIC), a class of multicomponent materials in which above a critical temperature, Ts, a constituent ionic species undergoes a sudden increase in mobility. Using first-principles and molecular dynamics simulations, we found that the superionic transition in fluorite-structured FIC, which is characterized by …

Creep and recovery of epoxy/MWCNT nanocomposites

2012

Abstract Creep and creep–recovery of epoxy/multi-wall carbon nanotube (MWCNT) composites was studied in a wide range of applied loads in order to evaluate the contribution of nanotubes on the time-dependent behaviour of the epoxy matrix. Incorporation of up to 1 wt.% of C150P MWCNTs has negligible influence on the elastic, viscoelastic and viscoplastic response of the epoxy system. No systematic changes of the creep characteristics depending on the content of nanotubes are noticed in the range of stresses from 0.3 up to 0.75 from the ultimate strength. Creep resistance and recovery performance of the epoxy matrix is not negatively affected by the addition of MWCNTs and the same analytical m…

Effect of modified starch or maltodextrin incorporation on the barrier and mechanical properties, moisture sensitivity and appearance of soy protein …

2012

Abstract This work aimed to study the effect of starch (acetylated di-starch phosphate and starch acetate) and maltodextrin (DE 10.2 and DE 15.6) on the properties of soy protein isolate (SPI) films. Films were cast from heated (70 °C for 20 min) alkaline (pH 10) aqueous solutions of soy protein isolate (8%) containing glycerol (50% of SPI) as a plasticizer and starch or maltodextrin (20% of SPI). For all types of films, water vapor sorption kinetics during 24 h at 25 °C and 75% relative humidity (RH), diffusion coefficient of water vapor, water vapor permeability at 25 °C for two relative humidity differentials (40–75 and 40–100%), tensile strength and elongation at break, color and micros…

Preparation, characterization and hydrolytic degradation of PLA/PCL co-mingled nanofibrous mats prepared via dual-jet electrospinning

2017

Abstract PLA/PCL co-mingled nanofibrous mats were prepared via multi-jet electrospinning. The concentration of PLA and PCL in the co-mingled mats were controlled by changing the flow rate of the two polymer solutions. The amount of PLA and PCL in the co-mingled nanofibrous mats was monitored by UV–Vis measurements through a colored dye added to PLA and by FTIR-ATR analysis. Morphology and mechanical properties of the nanofibrous mats were respectively examined by scanning electron microscopy (SEM) and tensile tests. Water contact angles measurements were also carried out in order to investigate the wettability of the materials. Finally, the hydrolytic degradation of the mats in buffer solut…

Evolution Characteristics of Delamination Damage in CFRP Composites Under Transverse Loading

2012

The initiation and subsequent progression of delamination in CFRP composite laminates is examined using finite element method. A 12-ply CFRP composite, with a total thickness of 2.4 mm and anti-symmetric ply sequence is simulated under three-point bend test setup. Each unidirectional composite lamina is treated as an equivalent elastic and orthotropic panel. Interface behavior is defined using cohesive damage model. Complementary three-point bend test on the specimen is performed at crosshead speed of 2 mm/min. The measured load–deflection response at mid-span location compares well with predicted values. Interface delamination accounts for up to 46.7% reduction in flexural stiffness from t…

Experimental investigation on the effectiveness of basalt-fibre strengthening systems for confining masonry elements

L’impiego di materiali compositi per il rinforzo di colonne in muratura è diventato una pratica ampiamente diffusa nel corso degli ultimi decenni. Questa tecnica, che consiste generalmente nell’applicazione di materiali polimerici fibrorinforzati (Fibre Reinforced Polymer-FRP), ha mostrato buone potenzialità, essendo in grado di garantire notevoli incrementi di resistenza e duttilità dell’elemento rinforzato, grazie ad un’azione di confinamento passivo. Tuttavia, l’impiego di compositi a matrice polimerica presenta alcuni limiti legati soprattutto alle prestazioni delle resine epossidiche, che a causa della loro natura sintetica danno luogo a problemi di compatibilità con il supporto murari…

Are there any differences in various polyaxial locking systems? A mechanical study of different locking screws in multidirectional angular stable dis…

2012

Numerous angular stable plates for the distal radius exist, and technically based comparisons of the polyaxial locking interfaces are lacking. The aim of this mechanical study was to investigate three different locking interfaces of angular stable volar plates by cantilever bending: VA-LCP Two-Column Distal Radius Plates 2.4 mm (Synthes® GmbH, Oberdorf, Switzerland), IXOS® P4 (Martin, Tuttlingen, Germany) and VariAX™ (Stryker®, Duisburg, Germany). We assessed the strength of 0°, 5°, 10° and 15° screw locking angles and tested the bending strength from 10° to 5° angles by cyclic loading until breakage. The final setup repeated the above assessments by inclusion of four locking screws. The si…

The effect of through-thickness compressive stress on mode II interlaminar fracture toughness

2017

Abstract The effect of through-thickness compressive stress on mode II interlaminar fracture toughness is investigated experimentally and replicated numerically. The modified Transverse Crack Tensile specimen recently proposed by the authors is used, together with an experimental device designed to apply a constant transverse compressive stress on the surface of the specimen. Experiments are conducted using IM7/8552 specimens for different compressive stresses, ranging from 0 to 100 MPa, covering all the practical applications commonly encountered in the aeronautical industry (e.g., tightened filled holes or bolted joints). It is shown that mode II interlaminar fracture toughness increases …

Constitutive Models for the Tensile Behaviour of TRM Materials: Literature Review and Experimental Verification

2021

In recent years, the scientific community has focused its interest on innovative inorganic matrix composite materials, namely TRM (Textile Reinforced Mortar). This class of materials satisfies the need of retrofitting existing masonry buildings, by keeping the compatibility with the substrate. Different recent studies were addressed to improve the knowledge on their mechanical behaviour and some theoretical models were proposed for predicting the tensile response of TRM strips. However, this task is complex due to the heterogeneity of the constituent materials and the stress transfer mechanism developed between matrix and fabric through the interface in the cracked stage. This paper present…

On the use of PET-LCP copolymers as compatibilizers for PET/LCP blends

1996

Copolyesters of poly[ethylene terephthalate) (PET) with a liquid crystalline polymer (LCP), SBH 1:1:2, have been synthesized by the polycondensation, carried out in the melt at temperatures up to 300 degrees C of sebacic acid (S), 4,4'-dihydroxybiphenyl (B), and 4-hydroxybenzoic acid (H) in the presence of PET. The PET-SBH copolyesters have been characterized by differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, etc., and the relationships between properties and preparation conditions are discussed. The copolyesters show a biphasic nature, which is more evident for the products synthesized with a thermal profile comprising relatively lower temperatures (220-…