Search results for "thin film"
showing 10 items of 1200 documents
Enhanced Thin-Film Transistor Performance by Combining 13,6-N-Sulfinylacetamidopentacene with Printed PEDOT:PSS Electrodes
2011
Bottom-contact/bottom-gate organic thin-film transistors (OTFTs) are fabricated using a soluble pentacene precursor (13,6-N-sulfinylacetamidopentacene; SAP) and inkjet printed PEDOT:PSS electrodes on bare SiO2 dielectrics. Saturation mobility, Ion/Ioff ratio, and threshold voltage parameters, respectively, of 0.27 cm2 V−1 s−1, 105, and −4.25 V were measured under ambient conditions after the thermal conversion of SAP to pentacene in 100 μm long channel OTFT devices. The results obtained by the above solution approach are comparable to that of vapor-phase grown pentacene-based OTFTs with photolithographic gold contacts and organic buffer layers and/or inorganic injection layers. The present …
One pot light assisted green synthesis, storage and antimicrobial activity of dextran stabilized silver nanoparticles.
2014
Background Green synthesis of nanomaterials finds the edge over chemical methods due to its environmental compatibility. Herein, we report green synthesis of silver nanoparticles (Ag NPs) mediated with dextran. Dextran was used as a stabilizer and capping agent to synthesize Ag NPs using silver nitrate (AgNO3) under diffused sunlight conditions. Results UV–vis spectra of as synthesized Ag nanoparticles showed characteristic surface plasmon band in the range from ~405-452 nm. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) studies showed spherical Ag NPs in the size regime of ~50-70 nm. Face centered cubic lattice of Ag NPs was confirmed by powder X-ray diffraction (PXRD…
Couches minces d'oxynitrure de titane : la réactivité comme moyen original de caractérisation physico - chimique
2002
Titanium oxinitride thin films, TiNxOy, were elaborated on Si(100) by the MOCVD (Metal Organic Chemical Vapor Deposition) method, using titanium isopropoxide Ti(OCH(CH3)2)4 and ammonia NH3 as precursors. By varying the growth temperature, it is possible to modify the N/O ratio and change the conductivity of the films.The target of this work was to determine the composition and the structure of these TiNxOy thin films in order to understand the electrical properties. However, this study was difficult because classical characterization techniques (SEM, XRD, Raman, XPS...) were unable to describe the whole TiNxOy system. Indeed, only a structure which is isomorphic to TiN (NaCl structure) was …
Atomic Layer Deposition of Intermetallic Fe4Zn9 Thin Films from Diethyl Zinc
2022
| openaire: EC/H2020/765378/EU//HYCOAT We present a new type of atomic layer deposition (ALD) process for intermetallic thin films, where diethyl zinc (DEZ) serves as a coreactant. In our proof-of-concept study, FeCl3 is used as the second precursor. The FeCl3 + DEZ process yields in situ crystalline Fe4Zn9 thin films, where the elemental purity and Fe/Zn ratio are confirmed by time-of-flight elastic recoil detection analysis (TOF-ERDA), Rutherford backscattering spectrometry (RBS), atomic absorption spectroscopy (AAS), and energy-dispersive X-ray spectroscopy (EDX) analyses. The film thickness is precisely controlled by the number of precursor supply cycles, as expected for an ALD process.…
Tribological properties of thin films made by atomic layer deposition sliding against silicon
2018
Interfacial phenomena, such as adhesion, friction, and wear, can dominate the performance and reliability of microelectromechanical (MEMS) devices. Here, thin films made by atomic layer deposition (ALD) were tested for their tribological properties. Tribological tests were carried out with silicon counterpart sliding against ALD thin films in order to simulate the contacts occurring in the MEMS devices. The counterpart was sliding in a linear reciprocating motion against the ALD films with the total sliding distances of 5 and 20 m. Al2O3 and TiO2 coatings with different deposition temperatures were investigated in addition to Al2O3-TiO2-nanolaminate, TiN, NbN, TiAlCN, a-C:H [diamondlike car…
Optimized Deposition of Graphene Oxide Langmuir-Blodgett Thin Films
2014
Abstract Single sheet graphene (SG) is an innovative transparent material with high electrical and thermal conduction the use of which in transparent electrodes instead of traditional materials improves the performance of optoelectronic devices. In this study, graphene oxide (GO) has been obtained by a modified Hummer`s method followed by an advanced technique of water removal (lyophilisation). The Langmuir-Blodgett (LB) method was applied to transfer GO from suspension to substrate. To optimize the deposition process, as suspending and spreading solvents the benzene and benzene/methanol mixtures were chosen instead of previously studied water suspensions. The number of GO layers in suspens…
Photoelectrical Properties and Energetical Structure of Thin Films of Indandione Derivatives
2011
A sandwich type structure of two dimetilaminobenziliden-1,3-indandione (DMABI) derivatives placed between metal electrodes was made to investigate the photoelectrical properties of these derivatives. DMABI is an organic isolator with a wide energy gap and high quantum efficiency of the photogeneration, DMABI derivatives have received also considerable attention because of its large dipole moment and optical nonlinearities. Besides, since it is a photosensitive material, its use in solar systems is very promising. The energy gap of each material and combined system was observed from the spectral dependence of the quantum efficiency of the photoconductivity and results are compared with resul…
Magnetization Dynamics in Proximity-Coupled Superconductor-Ferromagnet-Superconductor Multilayers
2020
In this work, magnetization dynamics is studied in superconductor/ferromagnet/superconductor three-layered films in a wide frequency, field, and temperature ranges using the broad-band ferromagnetic resonance measurement technique. It is shown that in presence of both superconducting layers and of superconducting proximity at both superconductor/ferromagnet interfaces a massive shift of the ferromagnetic resonance to higher frequencies emerges. The phenomenon is robust and essentially long-range: it has been observed for a set of samples with the thickness of ferromagnetic layer in the range from tens up to hundreds of nanometers. The resonance frequency shift is characterized by proximity-…
Exploring integration prospects of opal-based photonic crystals
2003
Different methods of functionalisation of thin opal films are discussed, including synthesis of opals on pre-patterned substrates, post-synthesis electron beam lithography, preparation of opals with heterogeneous photonic band gap structure and integrating opals with light sources. These approaches have been tested experimentally and key technological problems have been identified.
Structural and optical characterization of ZnS ultrathin films prepared by low-temperature ALD from diethylzinc and 1.5-pentanedithiol after various …
2019
The structural and optical evolution of the ZnS thin films prepared by atomic layer deposition (ALD) from the diethylzinc (DEZ) and 1,5-pentanedithiol (PDT) as zinc and sulfur precursors was studied. A deposited ZnS layer (of about 60 nm) is amorphous, with a significant S excess. After annealing, the stoichiometry improved for annealing temperatures &ge