Search results for "transient analysi"
showing 10 items of 22 documents
Evaluation of radiated EMI in 42 V vehicle electrical systems by FDTD simulation
2007
In this paper a full 3D numerical scheme, based on the finite difference time domain method, is used to predict the electromagnetic radiated interference generated by 42 V vehicle power electronic driven electrical loads. An experimental set-up has been arranged on purpose in order to validate the proposed simulation tool. To this aim, the features of a semi-anechoic electromagnetic chamber have been exploited in order to operate in a shielded test site for the measurement of near field radiated emissions. Two different three-dimensional geometrical configurations of realistic vehicle installations of the loads, are studied. A comparative analysis among measured and computed results is perf…
Diagnosis of mechanical unbalance for double cage induction motor load in time-varying conditions based on motor vibration signature analysis
2013
This paper investigates the detectability of mechanical unbalance in double cage induction motor load using motor vibration signature analysis technique. Rotor imbalances induce specific harmonic components in electrical, electromagnetical, and mechanical quantities. Harmonic components characteristic of this category of rotor faults, issued from vibration signals analysis, are closely related to rotating speed of the rotor, which complicates its detection under non-stationary operating conditions of the motor. Firstly, experimental results were performed first under healthy and mechanical load unbalance cases, for different load levels under steady-state operating conditions to evaluate th…
Transient Electrical Behaviour of the TF Superconducting Coils of Divertor Tokamak Test Facility During a Fast Discharge
2022
The paper is focused on the electromagnetic analysis of the Toroidal Field (TF) superconducting coils of the Divertor Tokamak Test facility (DTT) when electrical transients occur in the TF coils system: for example, during the operations of the Fast Discharge Units (FDUs) and considering also, the simultaneous occurrence of a fault condition. During the FDU intervention, a transient voltage excitation lasting few microseconds occurs at the TF coil terminals and it electrically stresses the insulations of TF coils itsef. To investigate the voltage distribution across, inside and between different Double Pancakes (DPs) of each TF coil, a lumped parameters circuital model has been developed an…
Heavy ion SEE studies on 4-Gbit NAND-Flash memories
2007
Heavy ion SEE studies on three 4-Gbit NAND-flash memory types were performed at the RADEF facility at the University of Jyvaskyla, Finland with particular emphasis on SEFI differentiation. An error classification for complex memory devices is introduced, and respective cross sections are reported.
Heat exchangers and linear image processing theory
1989
Abstract This paper shows that the transient analysis of some heat exchangers can be derived easily with the linear equations of image processing theory. Partial differential equations of the cross-flow, parallelflow and rotary heat exchangers are considered together with the corresponding discrete models for linear image processing. Some numerical examples show that the nature of the heat and/or mass transfer problems is similar to those of image processing.
One-Dimensional Transient Analysis of Rainfall Infiltration in Unsaturated Volcanic Ash
2015
The paper presents a one-dimensional hydro-mechanical analysis of rainfall infiltration in a loose volcanic ash and the utilisation of a factor of safety for the implementation of an early-warning system. Three different rainy seasons with different rainfall patterns were analysed . The analysis aims to understand the influence of the antecedent rainfall on the wetting front, the pore-water pressures and the factor of safety. The analysis was carried out in the context of a Master project of the first author at the Laboratory for Soil Mechanics of EPFL.
A boundary element model for piezoelectric dynamic strain sensing of cracked structures
2011
A piezoelectric sensor model is here presented for the Structural Health Monitoring (SHM) of damaged structures. A boundary element approach based on the Dual Reciprocity BEM is then used to model and analyze the transient response of a piezoelectric patch bonded on a cracked beam. The BE model is written for the piezoelectric problem employing generalized displacements. The multidomain boundary element technique is implemented to model non-homogeneous and cracked configuration, taking contact conditions into account. Analyses have been carried out for an isotropic beam with a piezoelectric strip attached on it and dynamical results for the undamaged structure have been compared with FE res…
On the transient response of actively repaired damaged structures by the boundary element method
2010
The transient fracture mechanics behavior of damaged structures repaired through active piezoelectric patches is presented in this paper. The analyses have been performed through a boundary element code implemented in the framework of piezoelectricity to take account of the coupling between the elastic and the electric fields, which represents the peculiar feature of piezoelectric media. The multi-domain technique has been also involved to assemble the host structures and the active patches and to model the cracks. Moreover, the patches have been considered elastically bonded to the damaged structure by means of a zero thickness adhesive layer. This has been achieved through the implementat…
Contaminant Intrusion through Leaks in Water Distribution System: Experimental Analysis
2015
Abstract This paper presents the results of experimental tests on the intrusion of contaminant through pipe cracks in water distribution network resulting from low/negative pressures. The tests were carried out on a looped distribution network at the University of Enna and were performed first producing a pressure transient that causes negative pressures then reproducing intermittent supply. A soluble contaminant was added to the water volume in the network through a pipe crack. Sampling of water volume was carried out in two nodes of the network and the contaminant concentrations were measured. It was showed that: the contaminant was drawn in and transported, in the first set of tests; the…
Col : A Data Collection Protocol for Vanet
2012
International audience; In this paper, we present a protocol to collect data within a vehicular ad hoc network (VANET). In spite of the intrinsic dynamic of such network, our protocol simultaneously offers three relevant properties: (1) It allows any vehicle to collect data beyond its direct neighborhood (i.e., vehicles within direct communication range) using vehicle-to-vehicle communications only (i.e., the infrastructure is not required); (2) It tolerates possible network partitions; (3) It works on demand and stops when the data collection is achieved. To the best of our knowledge, this is the first collect protocol having these three characteristics. All that is chiefly obtained thanks…