Search results for "transistors"
showing 10 items of 68 documents
Bias and humidity effects on the ammonia sensing of perylene derivative/lutetium bisphthalocyanine MSDI heterojunctions
2016
International audience; In this paper, we prepared and studied sensors based on Molecular Semiconductor-Doped Insulator (MSDI) heterojunctions. These original devices are built with two stacked layers of molecular materials and exhibit very specific electrical and sensing properties. We studied the properties of a MSDI composed of the perylenetetracarboxylic dianhydride, PTCDA, or the fluorinated perylenebisimine derivative, C4F7-PTCDI, as n-type molecular material sublayers, and LuPc2 as a p-type semiconductor top layer. Their response to ammonia was compared to that of a resistor formed of only the top layer of the MSDI (LuPc2). Ammonia increases the current in the MSDIs whereas it causes…
Effect of temperature–bias annealing on the hysteresis and subthreshold behavior of multilayer MoS2 transistors
2016
The transfer characteristics (ID-VG) of multilayers MoS2 transistors with a SiO2/Si backgate and Ni source/drain contacts have been measured on as-prepared devices and after annealing at different temperatures (T-ann from 150 degrees C to 200 degrees C) under a positive bias ramp (V-G from 0 V to + 20 V). Larger T-ann resulted in a reduced hysteresis of the ID-VG curves (from similar to 11 V in the as-prepared sample to similar to 2.5 V after Tann at 200 degrees C). The field effect mobility (similar to 30 cm(2) V-1 s(-1)) remained almost unchanged after the annealing. On the contrary, the subthreshold characteristics changed from the common n-type behaviour in the as-prepared device to the…
A Very Low Band Gap Diketopyrrolopyrrole-Porphyrin Conjugated Polymer
2017
International audience; A porphyrin-diketopyrrolopyrrole-containing polymer (poly(porphyrin-diketopyrrolopyrrole) (PPDPP)) shows impressive molar absorption coefficients from lambda=300 to 1000 nm. The photophysical and structural properties of PPDPP have been studied. With PPDPP as the electron donor and [ 6,6]phenyl C-71 butyric acid methyl ester (PC71BM) as the electron acceptor, the bulk heterojunction polymer solar cell showed overall power conversion efficiencies of 4.18 and 6.44% for as-cast and two-step annealing processed PPDPP: PC71BM (1: 2) active layers, respectively. These results are quite impressive for porphyrin-containing polymers, especially when directly included in the p…
Random Structural Modification of a Low-Band-Gap BODIPY-Based Polymer
2017
International audience; A BODIPY thiophene polymer modified by extending conjugation of the BODIPY chromophore is reported. This modification induces tunability of energy levels and therefore absorption wavelengths in order to target lower energies.
Ion-Selective Organic Electrochemical Transistors
2014
Ion-selective organic electrochemical transistors with sensitivity to potassium approaching 50 μA dec(-1) are demonstrated. The remarkable sensitivity arises from the use of high transconductance devices, where the conducting polymer is in direct contact with a reference gel electrolyte and integrated with an ion-selective membrane.
Organic Heterojunction Devices Based on Phthalocyanines: A New Approach to Gas Chemosensing.
2020
Organic heterostructures have emerged as highly promising transducers to realize high performance gas sensors. The key reason for such a huge interest in these devices is the associated organic heterojunction effect in which opposite free charges are accumulated at the interface making it highly conducting, which can be exploited in producing highly sensitive and faster response kinetics gas sensors. Metal phthalocyanines (MPc) have been extensively studied to fabricate organic heterostructures because of the large possibilities of structural engineering which are correlated with their bulk thin film properties. Accordingly, in this review, we have performed a comprehensive literature surve…
Porphyrins and BODIPY as Building Blocks for Efficient Donor Materials in Bulk Heterojunction Solar Cells
2017
International audience; Advances in the synthesis and application of highly efficient polymers and small molecules over the last two decades have enabled the rapid advancement in the development of organic solar cells and photovoltaic technology as a promising alternative to conventional solar cells, based on silicon and other inorganic semiconducting materials. Among the different types of organic semiconducting materials, porphyrins and BODIPY-based small molecules and conjugated polymers attract high interest as efficient semiconducting organic materials for dye sensitized solar cells and bulk heterojunction organic solar cells. The highest power conversion efficiency exceeding 9% has be…
Surface plasmon effects on carbon nanotube field effect transistors
2011
Herein, we experimentally demonstrate surface plasmon polariton (SPP) induced changes in the conductivity of a carbon nanotube field effect transistor (CNT FET). SPP excitation is done via Kretschmann configuration while the measured CNT FET is situated on the opposite side of the metal layer away from the laser, but within reach of the launched SPPs. We observe a shift of 0.4 V in effective gate voltage. SPP-intermediated desorption of physisorbed oxygen from the device is discussed as a likely explanation of the observed effect. This effect is visible even at low SPP intensities and within a near-infrared range. peerReviewed
Nanostructural depth-profile and field-effect properties of poly(alkoxyphenylene-thienylene) Langmuir-Schäfer thin-films
2008
The correlations between morphological features and field-effect properties of poly(alkoxyphenylene-thiophene) thin Langmuir–Schafer film deposited on differently terminated gate dielectric surfaces, namely bare and methyl functionalized thermal silicon dioxide (t-SiO2), have been systematically studied. The film morphology has been investigated at different film thickness by Scanning Force Microscopy. Films thicker than a few layers show comparable morphology on both dielectric surfaces while differences are seen for the ultra-thin polymer deposit in close proximity to the substrate. Such deposit is notably more heterogeneous on bare t-SiO2, while a more compact and uniform nanogranular st…
Efficiency comparison between SiC- and Si-based active neutral-point clamped converters
2015
This paper presents an efficiency comparison between silicon-carbide technology and silicon technology. In order to achieve this, the efficiency of an active neutral-point clamped converter built up with silicon carbide power-devices is compared with the efficiency of an active neutral-point clamped converter built up with silicon power-devices, under a particular operating mode and a particular selection of devices. Firstly, overall losses of both converters are estimated. Then, experimental tests are carried out to measure their overall losses and efficiency. Finally, experimental results are compared with the estimations to support the analysis. The efficiency of the SiC converter is hig…