Membrane porose in PLLA per la rigenerazione di mucosa bronchiale umana ottenute mediante DIPS

2014

Polmunary epithelial barrier formation on biodegradable poly-L-lactic-acid (PLLA) membrane

2016

Aims: Investigation of epithelial barrier formation using PLLA membranes for application in bioengineering. Background: The development of functional and biocompatible substitutes for damaged tissue or organs is a major challenge in biomedical engineering. The epithelial barrier plays a central role in tissue homeostasis and immunity preventing damage and contamination of the interstitial tissues. Different in vitro models of the lung and intestinal epithelial barriers have been well characterized, however these tend to use non-biodegradable and/or poorly biocompatible scaffolds. Therefore, there is a need for better supports for epithelial cells for future applications in tissue engineerin…

Study on heat transfer coefficients during cooling of PET bottles for food beverages

2015

The heat transfer properties of different cooling systems dealing with Poly-Ethylene-Terephthalate (PET) bottles were investigated. The heat transfer coefficient (Ug) was measured in various fluid dynamic conditions. Cooling media were either air or water. It was shown that heat transfer coefficients are strongly affected by fluid dynamics conditions, and range from 10 W/m2 K to nearly 400 W/m2 K. PET bottle thickness effect on Ug was shown to become relevant under faster fluid dynamics regimes.

TISSUE ENGINEERING FOR THE DEVELOPMENT OF THREE-DIMENSIONAL INVITRO MODELS OF HUMAN MUCOSAE

2014

Traditional two-dimensional (2D) cell cultures only partially reflect the morpho-molecular pattern of human cells in tissues, and they are also unable to fully mimic the complexity of the in vivo microenvironment. Cell development in in vivo systems differs significantly from classical 2D cell culture models, especially with regard to the morphology, growth kinetics, gene expression and the degree of differentiation. Tissue engineering allows the reproduction of tissues by cell seeding on biocompatible scaffolds, to form a homogenous ...

Establishment of a pulmonary epithelial barrier on biodegradable poly-L-lactic-acid membranes

2019

Development of biocompatible and functional scaffolds for tissue engineering is a major challenge, especially for development of polarised epithelia that are critical structures in tissue homeostasis. Different in vitro models of the lung epithelial barrier have been characterized using non-degradable polyethylene terephthalate membranes which limits their uses for tissue engineering. Although poly-L-lactic acid (PLLA) membranes are biodegradable, those prepared via conventional Diffusion Induced Phase Separation (DIPS) lack open-porous geometry and show limited permeability compromising their use for epithelial barrier studies. Here we used PLLA membranes prepared via a modification of the…

An integrated Tissue Engineering approach to Human Bronchial model: Biodegradable Scaffold and Microfluidics Platform

L’ingegneria tissutale è la combinazione di cellule, materiali e metodi di ingegneria, insieme con opportuni fattori biochimici e fisico-chimici, volta a migliorare o sostituire le funzioni biologiche di tessuti danneggiati [1, 2]. A tal proposito supporti porosi e sistemi microfluidici sono utilizzati per scopi di ingegneria tissutale. Scaffold polimerici biodegradabili sono stati sfruttati come supporti strutturali per rigenerare vari tessuti quali ossa, cartilagini, nervi, legamenti, pelle e fegato. Una geometria porosa aperta con canali interconnessi è un prerequisito per la crescita cellulare ad alta densità e per un trasporto di nutrienti, ossigeno e prodotti di scarto metabolici. …

Biological evaluation of PLLA membranes, with different pore diameters, to stimulate cell adhesion and growth in vitro

2015

Polymeric membranes prepared via DIPS (Diffusion Induced Phase Separation) are widely studied and utilized as scaffolds for the regeneration of tissue. In this work, poly (L)-lactide membrane are prepared through a DIPS protocol starting from a ternary solution made of polymer, dioxane (solvent) and water (non-solvent). A three-dimensional, porous and mechanically stable membrane is desirable for ingrowth of human bronchial epithelial cells. Polymeric membranes prepared via DIPS (Diffusion Induced Phase Separation) are widely studied and utilized as scaffolds for the regeneration of tissue. In this work, poly (L)-lactide membrane are prepared through a DIPS protocol starting from a ternary …

Evaluation of mechanical and morphologic features of PLLA membranes as supports for perfusion cells culture systems

2015

Abstract Porous biodegradable PLLA membranes, which can be used as supports for perfusion cell culture systems were designed, developed and characterized. PLLA membranes were prepared via diffusion induced phase separation (DIPS). A glass slab was coated with a binary PLLA–dioxane solution (8 wt.% PLLA) via dip coating, then pool immersed in two subsequent coagulation baths, and finally dried in a humidity-controlled environment. Surface and mechanical properties were evaluated by measuring pore size, porosity via scanning electron microscopy, storage modulus, loss modulus and loss angle by using a dynamic mechanical analysis (DMA). Cell adhesion assays on different membrane surfaces were a…

Design, build-up and optimization of a fast quenching device for polymeric thin film

2014

In this work an innovative apparatus for the characterization of polymer solidification under very high cooling rates (up to thousand of K/s) is described, according to the continuous cooling transformation approach adopted in metallurgy for studying structure development in metals. The proposed model experiment is addressed to design a method for the characterization of non-isothermal solidification behaviour, encompassing typical cooling conditions of polymer processing. Only temperature history determines the structure formed, as melt solidification takes place in quiescent conditions. With respect to the device previously developed by the authors [1, 3] the present equipment presents th…

Membrane biodegradabili in PLLA preparate mediante DIPS (Diffusion Induced Phase Separation) come supporto per la rigenerazione di mucosa bronchiale …

2014

Coagulation bath composition and desiccation environment as tuning parameters to prepare skinless membranes via diffusion induced phase separation

2015

Diffusion Induced Phase Separation (DIPS) is a currently used technique to produce porous membranes for a large variety of applications. A strong limitation is represented by the occurrence of a dense skin, which is formed during the process, highly reducing the membrane permeability. To overcome this issue, two modifications of the standard DIPS protocol were investigated: the use of coagulation baths composed by a solvent/nonsolvent mixture and the desiccation in a controlled environment, by modulating the partial pressure of nonsolvent vapor. An appropriate choice of coagulation bath composition, together with an appropriate desiccation protocol (i.e., the use of a nonsolvent vapor), wil…