0000000000041073
AUTHOR
José María De Teresa
showing 9 related works from this author
Erratum: De Teresa, J.M. et al. Comparison between Focused Electron/Ion Beam-Induced Deposition at Room Temperature and under Cryogenic Conditions. M…
2020
In Section 3 [...]
3D superconducting hollow nanowires with tailored diameters grown by focused He+ beam direct writing
2020
Currently, the patterning of innovative three-dimensional (3D) nano-objects is required for the development of future advanced electronic components. Helium ion microscopy in combination with a precursor gas can be used for direct writing of three-dimensional nanostructures with a precise control of their geometry, and a significantly higher aspect ratio than other additive manufacturing technologies. We report here on the deposition of 3D hollow tungsten carbide nanowires with tailored diameters by tuning two key growth parameters, namely current and dose of the ion beam. Our results show the control of geometry in 3D hollow nanowires, with outer and inner diameters ranging from 36 to 142 …
Comparison between Focused Electron/Ion Beam-Induced Deposition at Room Temperature and under Cryogenic Conditions
2019
This article belongs to the Special Issue Multi-Dimensional Direct-Write Nanofabrication.
Three-Dimensional Superconducting Nanohelices Grown by He+-Focused-Ion-Beam Direct Writing
2019
Novel schemes based on the design of complex three-dimensional (3D) nanoscale architectures are required for the development of the next generation of advanced electronic components. He+ focused-ion-beam (FIB) microscopy in combination with a precursor gas allows one to fabricate 3D nanostructures with an extreme resolution and a considerably higher aspect ratio than FIB-based methods, such as Ga+ FIB-induced deposition, or other additive manufacturing technologies. In this work, we report the fabrication of 3D tungsten carbide nanohelices with on-demand geometries via controlling key deposition parameters. Our results show the smallest and highest-densely packed nanohelix ever fabricated s…
Disordered hyperuniformity in superconducting vortex lattices
2020
Particles occupying sites of a random lattice present density fluctuations at all length scales. It has been proposed that increasing interparticle interactions reduces long range density fluctuations, deviating from random behaviour. This leads to power laws in the structure factor and the number variance that can be used to characterize deviations from randomness which eventually lead to disordered hyperuniformity. It is not yet fully clear how to link density fluctuations with interactions in a disordered hyperuniform system. Interactions between superconducting vortices are very sensitive to vortex pinning, to the crystal structure of the superconductor and to the value of the magnetic …
Ultra-fast direct growth of metallic micro- and nano-structures by focused ion beam irradiation
2019
An ultra-fast method to directly grow metallic micro- and nano-structures is introduced. It relies on a Focused Ion Beam (FIB) and a condensed layer of suitable precursor material formed on the substrate under cryogenic conditions. The technique implies cooling the substrate below the condensation temperature of the gaseous precursor material, subsequently irradiating with ions according to the wanted pattern, and posteriorly heating the substrate above the condensation temperature. Here, using W(CO)6 as the precursor material, a Ga+ FIB, and a substrate temperature of -100 °C, W-C metallic layers and nanowires with resolution down to 38 nm have been grown by Cryogenic Focused Ion Beam Indu…
Superconducting properties of in-plane W-C nanowires grown by He+ Focused Ion Beam Induced Deposition
2021
Focused ion beam induced deposition (FIBID) is a nanopatterning technique that uses a focused beam of charged ions to decompose a gaseous precursor. So far, the flexible patterning capabilities of FIBID have been widely exploited in the fabrication of superconducting nanostructures, using the W(CO)6 precursor mostly in combination with a focused beam of Ga+ ions. Here, the fabrication and characterization of superconducting in-plane tungsten-carbon (W-C) nanostructures by He+ FIBID of the W(CO)6 precursor is reported. A patterning resolution of 10 nm has been achieved, which is virtually unattainable for Ga+ FIBID. When the nanowires are patterned with widths of 20 nm and above, the deposit…
Critical current modulation induced by an electric field in superconducting tungsten-carbon nanowires
2021
The critical current of a superconducting nanostructure can be suppressed by applying an electric field in its vicinity. This phenomenon is investigated throughout the fabrication and electrical characterization of superconducting tungsten-carbon (W-C) nanostructures grown by Ga+ focused ion beam induced deposition (FIBID). In a 45 nm-wide, 2.7 μm-long W-C nanowire, an increasing side-gate voltage is found to progressively reduce the critical current of the device, down to a full suppression of the superconducting state below its critical temperature. This modulation is accounted for by the squeezing of the superconducting current by the electric field within a theoretical model based on th…
Long-range vortex transfer in superconducting nanowires
2019
Under high-enough values of perpendicularly-applied magnetic feld and current, a type-II superconductor presents a fnite resistance caused by the vortex motion driven by the Lorentz force. To recover the dissipation-free conduction state, strategies for minimizing vortex motion have been intensely studied in the last decades. However, the non-local vortex motion, arising in areas depleted of current, has been scarcely investigated despite its potential application for logic devices. Here, we propose a route to transfer vortices carried by non-local motion through long distances (up to 10 micrometers) in 50nm-wide superconducting WC nanowires grown by Ga+ Focused Ion Beam Induced Deposition.…