Acousto-electric single-photon detector

We propose a novel concept for a semiconductor-based single-photon detector for quantum information processing, which is capable of discriminating the number of photons in a light pulse. The detector exploits the charge transport by a surface acoustic wave (SAW) in order to combine a large photon absorption area (thus providing high photon collection efficiency) with a microscopic charge detection area, where the photo generated charge is detected with resolution at the single electron level using single electron transistors (SETs). We present preliminary results on acoustic transport measured in a prototype for the detector as well as on the fabrication of radio-frequency single-electron t…

Surface Acoustic Bloch Oscillations, the Wannier-Stark Ladder, and Landau-Zener Tunneling in a Solid

We present the experimental observation of Bloch oscillations, the Wannier-Stark ladder, and Landau-Zener tunneling of surface acoustic waves in perturbed grating structures on a solid substrate. A model providing a quantitative description of our experimental observations, including multiple Landau-Zener transitions of the anticrossed surface acoustic Wannier-Stark states, is developed. The use of a planar geometry for the realization of the Bloch oscillations and Landau-Zener tunneling allows a direct access to the elastic field distribution. The vertical surface displacement has been measured by interferometry.

Compact Mach-Zehnder acousto-optic modulator

The authors demonstrate a compact optical waveguide modulator based on a Mach-Zehnder interferometer driven by surface acoustic waves. The modulator was monolithically fabricated on GaAs with an active region length of approximately 15μm. It yields peak-to-peak modulation exceeding 90% of the average transmission and operation in the gigahertz frequency range.

Acoustically tunable photonic band gap structures

We discuss the formation of a tunable one-dimensional photonic band gap structure through the modulation of the resonance frequency of an optical microcavity by a surface acoustic wave (SAW). The microcavity consists of a λ/2 GaAs layer bounded by AlAs/GaAs Bragg mirrors. The SAW periodically modulates the optical thickness of the cavity layer, leading to a light dispersion relation folded within a mini-Brillouin zone (MBZ) defined by |k x |≤ π/λ SAW (k x denotes the photon wave vector component along the SAW propagation direction x-with-caret). In reflection and diffraction experiments, we observe photon modes bounding the gaps in the center and at the boundary of the MBZ as well as a reno…

Polarized recombination of acoustically transported carriers in GaAs nanowires

: The oscillating piezoelectric field of a surface acoustic wave (SAW) is employed to transport photoexcited electrons and holes in GaAs nanowires deposited on a SAW delay line on a LiNbO3 crystal. The carriers generated in the nanowire by a focused light spot are acoustically transferred to a second location where they recombine. We show that the recombination of the transported carriers occurs in a zinc blende section on top of the predominant wurtzite nanowire. This allows contactless control of the linear polarized emission by SAWs which is governed by the crystal structure. Additional polarization-resolved photoluminescence measurements were performed to investigate spin conservation d…

Dynamic carrier distribution in quantum wells modulated by surface acoustic waves

We have investigated the dynamics of photogenerated carriers under surface acoustic wave (SAW) fields in GaAs quantum wells using spatially and time-resolved photoluminescence (PL). The frequency and phase of the PL oscillations under a SAW yield information about the carrier distribution and the band-gap modulation induced by the SAW. We directly prove that the transport properties of the carriers ultimately control their distribution, storage and, subsequent recombination in the modulated potential.

Active photonic crystals based on surface acoustic waves

An active photonic crystal (PC) based on the modulation of a one-dimensional cavity resonator by electrically-generated surface acoustic waves is described. The high nonthermal population of surface modes combined with the enhanced Brillouin scattering in the cavity increases the intensity of the scattered light to values comparable to the excitation intensity. This process is employed to switch and modulate light beams in PCs.

Acoustically driven arrayed waveguide grating.

We demonstrate compact tunable phased-array wavelength-division multiplexers driven by surface acoustic waves (SAWs) in the low GHz range. The devices comprise two couplers, which respectively split and combine the optical signal, linked by an array of single-mode waveguides (WGs). Two different layouts are presented, in which multi-mode interference couplers or free propagating regions were separately employed as couplers. The multiplexers operate on five equally distributed wavelength channels, with a spectral separation of 2 nm. A standing SAW modulates the refractive index of the arrayed WGs. Each wavelength component periodically switches paths between the output channel previously asi…

Modulation of the electronic properties of GaN films by surface acoustic waves

We report on the interaction between photogenerated electron-hole pairs and surface acoustic waves (SAW) in GaN films grown on sapphire substrates. The spatial separation of photogenerated carriers by the piezoelectric field of the SAW is evidenced by the quenching of the photoluminescence (PL) intensity. The quenching levels in GaN are significantly smaller than those measured in GaAs under similar conditions. The latter is attributed to the lower exciton ionization efficiency and carrier separation probabilities mediated by the piezoelectric effect. The PL spectra also evidence energy shifts and broadenings of the electronic transitions, which are attributed to the band gap modulation by …

Acousto-optical multiple interference devices

We present a new concept for waveguide acousto-optical devices based on coupled MachZehnder interferometers driven by acoustic waves. These acousto-optical multiple interference devices use the periodic refractive index modulation induced by the acoustic wave to realize functionalities such as ON/OFF switching for an arbitrary time interval, as well as for efficient light modulation at high harmonics of the acoustic frequency and pulse shaping for, e.g., integrated Q-switches. We also discuss application of the concepts to light modulation by very high acoustic frequencies, where the acoustic wavelengths become much shorter than the optical ones.

Synchronized photonic modulators driven by surface acoustic waves

Photonic modulators are one of the most important elements of integrated photonics. We have designed, fabricated, and characterized a tunable photonic modulator consisting of two 180 degrees-dephased output waveguide channels, driven by a surface acoustic wave in the GHz frequency range built on (Al,Ga)As. Odd multiples of the fundamental driven frequency are enabled by adjusting the applied acoustic power. A good agreement between theory and experimental results is achieved. The device can be used as a building block for more complex integrated functionalities and can be implemented in several material platforms. (C) 2013 Optical Society of America

Carrier Transport in GaAs Nanowires Using Surface Acoustic Waves

ABSTRACTThe oscillating piezoelectric field of a surface acoustic wave (SAW) is employed to transport photoexcited electrons and holes in GaAs nanowires (NWs) transferred to a SAW beam line on a LiNbO3 crystal. We show that carriers generated in the NW by a focused light spot can be acoustically transported to a second location, where they recombine emitting short light pulses. The results presented here demonstrate the high-frequency manipulation of carriers in NWs without the use of electrical contacts, which opens new perspectives for applications in opto-electronic devices operating at GHz frequencies.

Acoustic manipulation of electron-hole pairs in GaAs at room temperature

We demonstrate the optically detected long-range (>100 μm) ambipolar transport of photogenerated electrons and holes at room temperature by surface acoustic waves (SAWs) in (In,Ga)As-based quantum well structures coupled to an optical microcavity. We also show the control of the propagation direction of the carriers by a switch composed of orthogonal SAW beams, which can be used as a basic control gate for information processing based on ambipolar transport.

Tunable coupled surface acoustic cavities

We demonstrate the electric tuning of the acoustic field in acoustic microcavities (MCs) defined by a periodic arrangement of metal stripes within a surface acoustic delay line on LiNbO3 substrate. Interferometric measurements show the enhancement of the acoustic field distribution within a single MC, the presence of a “bonding” and “anti-bonding” modes for two strongly coupled MCs, as well as the positive dispersion of the “mini-bands” formed by five coupled MCs. The frequency and amplitude of the resonances can be controlled by the potential applied to the metal stripes.

Phonon-induced polariton superlattices

We show that the coherent interaction between microcavity polaritons and externally stimulated acoustic phonons forms a tunable polariton superlattice with a folded energy dispersion determined by the phonon population and wavelength. Under high phonon concentration, the strong confinement of the optical and excitonic polariton components in the phonon potential creates weakly coupled polariton wires with a virtually flat energy dispersion.

Acousto-optical multiple interference switches

The authors introduce an alternative approach for acousto-optical light control based on the interference of light propagating through several waveguides, each subjected to a periodic refractive index modulation induced by a surface acoustic wave. The feasibility of the concept is demonstrated by the realization of an optical switch for arbitrary time intervals with an on/off contrast ratio of 20.

Phonon-induced optical superlattice

We demonstrate the formation of a dynamic optical superlattice through the modulation of a semiconductor microcavity by stimulated acoustic phonons. The high coherent phonon population produces a folded optical dispersion relation with well-defined energy gaps and renormalized energy levels, which are accessed using reflection and diffraction experiments.

Acoustic phonons for coherent photon control in semiconductor structures

We present a novel concept for acousto-optical modulation in waveguide (WG) structures using coherent phonons in the form of surface acoustic waves (SAWs). Here, a SAW impinging perpendicular to a waveguide structure induces a change in phase of the light propagating through it, which is translated into a transmission intensity modulation by using the WG as an arm of a Mach-Zehnder interferometer (MZI). We show that the modulation becomes strongly enhanced if the SAW induces phase changes of opposite sign in the MZI arms. Very compact modulators with an interaction length between the optical and acoustic waves of approx. 15 µm have been fabricated using focusing acoustic transducers to gene…

Microscopic carrier dynamics in quantum wells modulated by high-frequency lateral fields

Abstract We have investigated the dynamics of photogenerated carriers in GaAs quantum wells under the influence of high-frequency fields produced by metal gratings and by surface acoustic waves (SAW's) using spatially and time-resolved photoluminescence (PL). The frequency and phase of the PL oscillations induced by the high-frequency field yield information about the spatial distribution of the carriers and, in the case of SAW's, about the band-gap modulation induced by the SAW strain.

Tunable arrayed waveguide grating driven by surface acoustic waves

We present a design approach for compact reconfigurable phased-array wavelength-division multiplexing (WDM) devices with N access waveguides (WGs) based on multimode interference (MMI) couplers. The proposed devices comprise two MMI couplers which are employed as power splitters and combiners, respectively, linked by an array of N single-mode WGs. First, passive devices are explored. Taking advantage of the transfer phases between the access ports of the MMI couplers, we derive very simple phase relations between the arms that provide wavelength dispersion at the output plane of the devices. When the effective refractive index of the WGs is modulated with the proper relative optical phase d…

Spatiotemporal carrier dynamics in quantum wells under surface acoustic waves

We present a theoretical study of transport and recombination of electrons and holes in quantum wells under the piezoelectric field induced by a surface acoustic wave (SAW). Our model calculations, which include free carriers and excitons in the framework of the drift-diffusion equations, describe the spatial and time dependences of the photoluminescence intensity on excitation density and SAW amplitude, and show overall agreement with recent microphotoluminescence experiments performed on GaAs/(Al,Ga)As quantum wells and quantum wires.

Photoluminescence from strained InAs monolayers in GaAs under pressure

bulk GaAs. At pressures above the band crossover two emission bands are observed. These bands, characterized by having negative pressure coefBcients, are attributed to the type-I transition between conduction-band X „and heavy-hole states of the InAs monolayer and the type-II transition &om X states in GaAs to InAs heavy-hole states. The results are interpreted in terms of tight-binding band-structure calculations for the strained InAs-monolayer — bulk-GaAs system. I. INTRODUCTION Highly strained InAs jGaAs heterostructures have recently attracted interest due to their unusual electronic and optical properties. ~ 4 Epitaxial isomorphic growth of InAs on GaAs can be achieved only up to a sma…

Compact acousto-optic multimode interference device in (Al,Ga)As.

Multimode interference (MMI) devices are key components in modern integrated photonic circuits. Here, we present acoustically tuned optical switches on an (Al,Ga)As platform that enable robust, compact and fast response systems improving on recently demonstrated technology. The device consists of a 2 × 2 MMI device fine-tuned in its center region by a focused surface acoustic wave (SAW) beam working in the low GHz range. In this way, we can tune the refractive index profile over a narrow modulation region and thus control the optical switching behaviour via the applied SAW intensity. Direct tuning of the MMI device avoids losses and phase errors inherent to arrayed waveguide based switches,…

Direct imaging of delayed magneto-dynamic modes induced by surface acoustic waves.

The magnetoelastic effect—the change of magnetic properties caused by the elastic deformation of a magnetic material—has been proposed as an alternative approach to magnetic fields for the low-power control of magnetization states of nanoelements since it avoids charge currents, which entail ohmic losses. Here, we have studied the effect of dynamic strain accompanying a surface acoustic wave on magnetic nanostructures in thermal equilibrium. We have developed an experimental technique based on stroboscopic X-ray microscopy that provides a pathway to the quantitative study of strain waves and magnetization at the nanoscale. We have simultaneously imaged the evolution of both strain and magne…

Acoustically tunable photonic structures based on microcavity polaritons

Abstract The interaction between surface acoustic waves (SAWs) with (Al,Ga)As microcavity polaritons results in the formation of a dynamic optical superlattice with folded light dispersion and energy stop bands when the lower polariton branch is predominantly of photonic character. For small detunings between the excitonic and optical cavity resonances, the SAW bleaches the polariton resonances through the efficient dissociation of the excitons by its piezoelectric field.

Thermally Tunable Surface Acoustic Wave Cavities

We experimentally demonstrate the dynamical tuning of the acoustic field in a surface acoustic wave (SAW) cavity defined by a periodic arrangement of metal stripes on LiNbO3 substrate. Applying a dc voltage to the ends of the metal grid results in a temperature rise due to resistive heating that changes the frequency response of the device up to 0.3%, which can be used to control the acoustic transmission through the structure. The timescale of the switching is demonstrated to be of about 200 ms. In addition, we have also performed finite-element simulations of the transmission spectrum of a model system, which exhibits a temperature dependence consistent with the experimental data. The adv…

Different temperature renormalizations for heavy and light-hole states of monolayer-thick heterostructures

Abstract We have found that the energy splitting between peaks in the linearly polarized emission from the cleaved surface of an InAs/GaAs monolayer structure triples with increasing temperature in the range from 5 to 150 K. For each polarization the main emission line corresponds to the radiative recombination of either heavy or light-hole excitons bound to the monolayer. The striking temperature behavior of the peak energies originates from the different hole–phonon coupling due to the much larger penetration of the light-hole envelope function into the GaAs. We prove this assertion by confining the light holes to the InAs plane with a strong magnetic field, which leads to a reduction of …

Tight-binding calculation of spin splittings in semiconductor superlattices

Acoustically driven photon antibunching in nanowires.

The oscillating piezoelectric field of a surface acoustic wave (SAW) is employed to transport photoexcited carriers, as well as to spatially control exciton recombination in GaAs-based nanowires (NWs) on a subns time scale. The experiments are carried out in core-shell NWs transferred to a SAW delay line on a LiNbO(3) crystal. Carriers generated in the NW by a focused laser spot are acoustically transferred to a second location, leading to the remote emission of subns light pulses synchronized with the SAW phase. The dynamics of the carrier transport, investigated using spatially and time-resolved photoluminescence, is well-reproduced by computer simulations. The high-frequency contactless …

Focusing of surface-acoustic-wave fields on (100) GaAs surfaces

Focused surface-acoustic waves (SAWs) provide a way to reach intense acoustic fields for electro- and optoacoustic applications on semiconductors. We have investigated the focusing of SAWs by interdigital transducers (IDTs) deposited on (100)-oriented GaAs substrates. The focusing IDTs have curved fingers designed to account for the acoustic anisotropy of the substrate. Different factors that affect focusing, such as the aperture angle and the configuration of the IDT fingers, were systematically addressed. We show that the focusing performance can be considerably improved by appropriate choice of the IDT metal pads, which, under appropriate conditions, create an acoustic waveguide within t…

Semiconductor optical waveguide devices modulated by surface acoustic waves