Towards metal chalcogenide nanowire-based colour-sensitive photodetectors
Financial support provided by Scientific Research Project for Students and Young Researchers Nr. SJZ/2016/6 realized at the Institute of Solid State Physics, University of Latvia is greatly acknowledged. Authors are grateful to Reinis Ignatans for XRD measurements.
Processing of amorphous Si by pulsed laser irradiation at different wavelengths
Amorphous Si thin films deposited on thermally oxidized Si wafers have been processed by the 2 nd and 3 rd harmonics of Nd:YAG laser. Surface modification of amorphous silicon layers have been investigated by scanning electron microscopy before and after chemical etching of processed silicon films. The super-lateral crystal growth regime was achieved with laser fluence of 280 mJ/cm 2 for the 2 nd harmonics and 155 mJ/cm 2 for the 3 rd harmonics. The grain size in polycrystalline Si samples prepared by successive crystallization in the lateral growth regime is about 0.5 - 1 μm.
Unexpected Epitaxial Growth of a Few WS2 Layers on {11̅00} Facets of ZnO Nanowires
Core–shell nanowires are an interesting and perspective class of radially heterostructured nanomaterials where epitaxial growth of the shell can be realized even at noticeable core–shell lattice mismatch. In this study epitaxial hexagonally shaped shell consisting of WS2 nanolayers was grown on {1100} facets of prismatic wurtzite-structured [0001]-oriented ZnO nanowires for the first time. A synthesis was performed by annealing in a sulfur atmosphere of ZnO/WO3 core–shell structures, produced by reactive dc magnetron sputtering of an amorphous a-WO3 layer on top of ZnO nanowire array. The morphology and phase composition of synthesized ZnO/WS2 core–shell nanowires were confirmed by scanning…
Some aspects of pulsed laser deposition of Si nanocrystalline films
International audience; Nanocrystalline silicon films were deposited by a picosecond laser ablation on different substrates in vacuum at room temperature. A nanocrystalline structure of the films was evidenced by atomic force microscopy (AFM), optical and Raman spectroscopies. A blue shift of the absorption edge was observed in optical absorption spectra, and a decrease of the optical phonon energy at the Brillouin zone centre was detected by Raman scattering. Early stages of nanocrystalline film formation on mica and HOPG substrates were studied by AFM. Mechanism of nanocrystal growth on substrate is discussed.
A comparative study of heterostructured CuO/CuWO4 nanowires and thin films
Authors are grateful to Reinis Ignatans for XRD measurements.
Structure and characteristics of laser crystallized thin amorphous Si films
Abstract Pure amorphous Si thin films deposited on oxidized crystalline Si surface (111) were crystallized by picosecond UV laser pulses. The Raman scattering spectra show that pulse energy of 330 mJ/cm2 is enough to fully crystallize Si film and further increase of the energy does not improve crystallinity. A large grained polycrystalline Si was obtained as revealed by surface analysis. A significant increase in carrier mobility was observed after laser crystallization.
Detection of deuterium retention by LIBS at different background pressures
ITER plans foresee the quantitative diagnostics of fuel retention in reactor walls at near-atmospheric pressures. Using laser induced breakdown spectroscopy (LIBS) for this purpose assumes a reliable resolving of Balmer α-lines of hydrogen isotopes in spectra of plasma produced by focused laser radiation onto the target surface. To develop LIBS for quantitative diagnostics of fuel retention during the maintenance breaks of ITER, the effect of background gas pressure on the laser-induced plasma characteristics has been studied. The background pressure limits the expansion rate of plasma and as a result it leads to higher plasma concentrations. At the same time the limiting factor of the reso…
Manipulation of nanoparticles of different shapes inside a scanning electron microscope
In this work polyhedron-like gold and sphere-like silver nanoparticles (NPs) were manipulated on an oxidized Si substrate to study the dependence of the static friction and the contact area on the particle geometry. Measurements were performed inside a scanning electron microscope (SEM) that was equipped with a high-precision XYZ-nanomanipulator. To register the occurring forces a quartz tuning fork (QTF) with a glued sharp probe was used. Contact areas and static friction forces were calculated by using different models and compared with the experimentally measured force. The effect of NP morphology on the nanoscale friction is discussed.
Comparison of LIBS results on ITER-relevant samples obtained by nanosecond and picosecond lasers
This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement number 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Work performed under EUROfusion WP PFC.
Metal nanodumbbells for nanomanipulations and tribological experiments
Nanomanipulation experiments were carried out on nanodumbbells (NDs) to study their kinetic behavior and tribological properties. Ag, Au and Cu NDs were produced by laser-induced melting of corresponding nanowires (NWs). NDs were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Manipulation experiments were performed first with atomic force microscope (AFM) at ambient conditions, and then inside SEM at high vacuum conditions. Different regimes of motion were observed. In-plane and out-of-substrate-plane rotation were identified as the most preferred motion types of NDs.
Toluidine Blue Test for Sperm DNA Integrity and Elaboration of Image Cytometry Algorithm
Background: Sperm DNA integrity is of paramount importance in the prognosis of fertility. We applied image cytometry to a toluidine blue (TB) test we recently proposed. Methods: Sperm samples from 33 men were assayed for standard sperm parameters and classified as normal or abnormal. Sperm smears were subjected to the TB test, DNA denaturation testing with acridine orange (AO), and terminal deoxyuridine triphosphate biotin nick end labeling (TUNEL). In CCD image analysis, TB-stained sperm cell heads were microscopically assigned to one of four color groups (dark, blue, light violet, and light blue). The optical densities of 6,600 cells in green and red CCD images were used to elaborate an a…
Fast-Response Single-Nanowire Photodetector Based on ZnO/WS 2 Core/Shell Heterostructures
This work was supported by the Latvian National Research Program IMIS2 and ISSP project for Students and Young Researchers Nr. SJZ/2016/6. S.P. is grateful to the ERA.Net RUS Plus WATERSPLIT project no. 237 for the financial support. S.V. is grateful for partial support by the Estonian Science Foundation grant PUT1689.
Some aspects of formation and tribological properties of silver nanodumbbells.
In this paper, metal nanodumbbells (NDs) formed by laser-induced melting of Ag nanowires (NWs) on an oxidized silicon substrate and their tribological properties are investigated. The mechanism of ND formation is proposed and illustrated with finite element method simulations. Tribological measurements consist in controllable real-time manipulation of NDs inside a scanning electron microscope (SEM) with simultaneous force registration. The geometry of NDs enables to distinguish between different types of motion, i.e. rolling, sliding and rotation. Real contact areas are calculated from the traces left after the displacement of NDs and compared to the contact areas predicted by the contact m…
Plasma Dynamics Characterization for Improvement of Resonantly Enhanced Harmonics Generation in Indium and Tin Laser-Produced Plasmas
R.A.G. is grateful to H. Kuroda for providing the access to the laser facility. As a Center of Excellence, the Institute of Solid State Physics at the University of Latvia received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement no. 739508, project CAMART².
Plasma-wall interaction studies within the EUROfusion consortium: Progress on plasma-facing components development and qualification
This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.
Amorphous ultra-wide bandgap ZnOx thin films deposited at cryogenic temperatures
Crystalline wurtzite zinc oxide (w-ZnO) can be used as a wide band gap semiconductor for light emitting devices and for transparent or high temperature electronics. The use of amorphous zinc oxide (a-ZnO) can be an advantage in these applications. In this paper we report on X-ray amorphous a-ZnOx thin films (~500 nm) deposited at cryogenic temperatures by reactive magnetron sputtering. The substrates were cooled by a nitrogen flow through the copper substrate holder during the deposition. The films were characterized by X-ray diffraction (XRD), Raman, infrared, UV-Vis-NIR spectroscopies, and ellipsometry. The a-ZnOx films on glass and Ti substrates were obtained at the substrate holder temp…
Synthesis and characterization of ZnO/ZnS/MoS2 core-shell nanowires
The present research was supported by the Latvian National Research Program IMIS2 . Authors are grateful for Dr. Robert Kalendarev and Martins Zubkins for assistance in magnetron sputtering, Dr. Krisjanis Smits for TEM measurements, Dr. Roberts Zabels for AFM measurements and Reinis Ignatans for XRD measurements.
Enhanced Reflectivity Change and Phase Shift of Polarized Light: Double Parameter Multilayer Sensor
Herein, the concept of point of darkness based on polarized light phase difference and absorption of light is demonstrated by simulations using low refractive index and extinction coefficient semiconductor and dielectric, and high refractive index nonoxidizing metal multilayer thin film structures. Several multilayer sensor configurations show great sensitivity to thickness and refractive index variation of the detectable material by measuring the reflectivity ratio {\Psi} and phase shift {\Delta}. Focus is on such multilayers, which have sensitivity to both parameters ({\Psi}, {\Delta}) in the visible spectral range, thus opening the possibility for further research on a new biomedical sen…