0000000000222013
AUTHOR
Sami Kinnunen
Al2O3 ALD films grown using TMA + rare isotope 2H216O and 1H218O precursors
Abstract In this work hydrogen and oxygen migration and exchange reactions in the atomic layer deposited (ALD) Al2O3 thin films were studied together with hydrogen incorporation by varying deposition parameters. Al2O3 films deposited at low temperatures can contain more than 20 at.% of hydrogen. Both higher temperature and longer purge length decrease the hydrogen and carbon concentrations significantly. In order to track the hydrogen and oxygen movement in the films, heavy water (2 H 2 16 O) and oxygen-18 enriched water (1 H 2 18 O) were used as precursors in combination with trimethylaluminium (TMA). Different isotopes of the same element were quantified by means of time-of-flight elastic…
Hydrogen and Deuterium Incorporation in ZnO Films Grown by Atomic Layer Deposition
Zinc oxide (ZnO) thin films were grown by atomic layer deposition using diethylzinc (DEZ) and water. In addition to depositions with normal water, heavy water (2H2O) was used in order to study the reaction mechanisms and the hydrogen incorporation at different deposition temperatures from 30 to 200 °C. The total hydrogen concentration in the films was found to increase as the deposition temperature decreased. When the deposition temperature decreased close to room temperature, the main source of impurity in hydrogen changed from 1H to 2H. A sufficiently long purging time changed the main hydrogen isotope incorporated in the film back to 1H. A multiple short pulse scheme was used to study th…
Elongation and plasmonic activity of embedded metal nanoparticles following heavy ion irradiation
Shape modification of embedded nanoparticles by swift heavy ion (SHI) irradiation is an effective way to produce nanostructures with controlled size, shape, and orientation. In this study, randomly oriented gold nanorods embedded in SiO2 are shown to re-orient along the ion beam direction. The degree of orientation depends on the irradiation conditions and the nanorod's initial size. SHI irradiation was also applied to modify spherical metallic nanoparticles embedded in Al2O3. The results showed that they elongate due to the irradiation comparably to those embedded in SiO2. Metallic nanostructures embedded in dielectric matrices can exhibit localized surface plasmon (LSP) modes. The elongat…
Thermal atomic layer deposition of AlOxNy thin films for surface passivation of nano-textured flexible silicon
Abstract Aluminum oxynitride (AlOxNy) films with different nitrogen concentration are prepared by thermal atomic layer deposition (ALD) for flexible nano-textured silicon (NT-Si) surface passivation. The AlOxNy films are shown to exhibit a homogeneous nitrogen-doping profile and the presence of an adequate amount of hydrogen, which is investigated by Time-of-Fight Elastic Recoil Detection Analysis (ToF-ERDA). The effective minority carrier lifetimes are measured after the NT-Si surface passivation; the minimum surface recombination velocity (SRV) of 5 cm-s−1 is achieved with the AlOxNy film in comparison to the Al2O3 and AlN films (SRV of 7–9 cm-s−1). The better SRV with AlOxNy film is due …
Characterization of ALD grown Ti x Al y N and Ti x Al y C thin films
Abstract Atomic layer deposition (ALD) was used to grow Ti x Al y N and Ti x Al y C thin films using trimethylaluminum (TMA), titanium tetrachloride and ammonia as precursors. Deposition temperature was varied between 325 °C and 500 °C. Films were also annealed in vacuum and N 2 -atmosphere at 600–1000 °C. Wide range of characterization methods was used including time-of-flight elastic recoil detection analysis (ToF-ERDA), X-ray diffractometry (XRD), X-ray reflectometry (XRR), Raman spectroscopy, ellipsometry, helium ion microscopy (HIM), atomic force microscopy (AFM) and 4-point probe measurement for resistivity. Deposited films were roughly 100 nm thick and contained mainly desired elemen…
Antiferromagnetism and p‐type conductivity of nonstoichiometric nickel oxide thin films
Plasma‐enhanced atomic layer deposition was used to grow non‐stoichiometric nickel oxide thin films with low impurity content, high crystalline quality, and p‐type conductivity. Despite the non‐stoichiometry, the films retained the antiferromagnetic property of NiO.
Al2O3 ALD films grown using TMA + rare isotope 2H216O and 1H218O precursors
In this work hydrogen and oxygen migration and exchange reactions in the atomic layer deposited (ALD) Al2O3 thin films were studied together with hydrogen incorporation by varying deposition parameters. Al2O3 films deposited at low temperatures can contain more than 20 at. % of hydrogen. Both higher temperature and longer purge length decrease the hydrogen and carbon concentrations significantly. In order to track the hydrogen and oxygen movement in the films, heavy water (2H216O) and oxygen-18 enriched water (1H218O) were used as precursors in combination with trimethylaluminium (TMA). Different isotopes of the same element were quantified by means of time-of-flight elastic recoil detectio…
The α and γ plasma modes in plasma-enhanced atomic layer deposition with O2-N2 capacitive discharges
Two distinguishable plasma modes in the O2–N2 radio frequency capacitively coupled plasma (CCP) used in remote plasma-enhanced atomic layer deposition (PEALD) were observed. Optical emission spectroscopy and spectra interpretation with rate coefficient analysis of the relevant processes were used to connect the detected modes to the α and γ modes of the CCP discharge. To investigate the effect of the plasma modes on the PEALD film growth, ZnO and TiO2 films were deposited using both modes and compared to the films deposited using direct plasma. The growth rate, thickness uniformity, elemental composition, and crystallinity of the films were found to correlate with the deposition mode. In re…
Characterization of ALD grown TixAlyN and TixAlyC thin films
Atomic layer deposition (ALD) was used to grow TixAlyN and TixAlyC thin films using trimethylaluminum (TMA), titanium tetrachloride and ammonia as precursors. Deposition temperature was varied between 325 °C and 500 °C. Films were also annealed in vacuum and N2-atmosphere at 600–1000 °C. Wide range of characterization methods was used including time-of-flight elastic recoil detection analysis (ToF-ERDA), X-ray diffractometry (XRD), X-ray reflectometry (XRR), Raman spectroscopy, ellipsometry, helium ion microscopy (HIM), atomic force microscopy (AFM) and 4-point probe measurement for resistivity. Deposited films were roughly 100 nm thick and contained mainly desired elements. Carbon, chlorin…
Size dependent swift heavy ion induced Au nanoparticle elongation in SiO2 matrix
The elongation of spherical Au nanoparticles embedded in SiO2 under swift heavy ion (SHI) irradiation is an extensively studied phenomenon. The use of a TEM grid as a substrate facilitates the identification of the same nanoparticle before and after the irradiation. Since the underdensification of SiO2 inside the ion track plays a key role, the elongation is sensitive to the matrix material properties. Therefore, we studied the elongation process of SHI irradiated Au spherical nanoparticles of various diameters (5–80 nm) embedded either in atomic layer deposition (ALD) or plasma-enhanced chemical vapor deposition (PECVD) SiO2. The results show that a different elongation ratio is achieved d…