Photoluminescence immunosensor based on bovine leukemia virus proteins immobilized on the ZnO nanorods

2019

Bovine leukaemia virus (BLV) proteins gp51, which are serving as antigens for specific antibodies against BLV proteins (anti-gp51), were applied as biological recognition part in the design of immunosensor devoted for the determination of anti-gp51. The efficiency of the immobilization of BLV proteins gp51 on ZnO nanorod (ZnO- NR) modified glass (ZnO-NR/glass) surface was evaluated. The formation of antigen-antibody complex on the ZnO/glass modified by the BLV proteins gp51 (gp51/ZnO-NR/glass) was investigated by the determination of changes in ZnO photoluminescence. The applicability of gp51/ZnO-NR/glass in the design of photoluminescence based immunosensor was evaluated. Bovine serum albu…

Fabrication and Characterization of Double- and Single-Clamped CuO Nanowire Based Nanoelectromechanical Switches

2021

Electrostatically actuated nanoelectromechanical (NEM) switches hold promise for operation with sharply defined ON/OFF states, high ON/OFF current ratio, low OFF state power consumption, and a compact design. The present challenge for the development of nanoelectromechanical system (NEMS) technology is fabrication of single nanowire based NEM switches. In this work, we demonstrate the first application of CuO nanowires as NEM switch active elements. We develop bottom-up and top-down approaches for NEM switch fabrication, such as CuO nanowire synthesis, lithography, etching, dielectrophoretic alignment of nanowires on electrodes, and nanomanipulations for building devices that are suitable f…

Visible Photoluminescence of Variable-Length Zinc Oxide Nanorods Embedded in Porous Anodic Alumina Template for Biosensor Applications

2021

Zinc oxide (ZnO) and porous anodic aluminum oxide (PAAO) are technologically important materials, rich with features that are of interest in optical applications, for example, in light-emitting and sensing devices. Here, we present synthesis method of aligned ZnO nanorods (NR) with 40 nm diameter and variable length in 150 to 500 nm range obtained by atomic layer deposition (ALD) of ZnO in pores of continuously variable thickness PAAO. The relative intensity of yellow (1.99 eV), green (2.35 eV), and blue (2.82 eV) photoluminescence (PL) components originating from the different types of defects, varied with non-monotonic dependency on the composite film thickness with a Fabry–Pérot like mod…

Effect of gamma radiation on thermostimulated exoelectron emission from Gd2O3 films

2020

Abstract The effect of gamma irradiation on Gd2O3 films was studied using the thermostimulated exoelectron emission (TSEE) technique. The films were deposited on a glass and Si/SiO2 substrates using an extraction-pyrolytic method. Crystalline structure, chemical composition, film thickness and surface morphology were characterized by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The films were irradiated by 10 MeV gamma photons and TSEE was measured from the irradiated films. It was found that gamma irradiation decreases TSEE intensity and the area below TSEE spectral curves. A linear correlati…

The membrane toxicology of rods and spheric zinc oxide nanoparticles

2018

Porous silicon based photoluminescence immunosensor for rapid and highly-sensitive detection of Ochratoxin A.

2017

A rapid and low cost photoluminescence (PL) immunosensor for the determination of low concentrations of Ochratoxin A (OTA) has been developed. This immunosensor was based on porous silicon (PSi) and modified by antibodies against OTA (anti-OTA). PSi layer was fabricated by metal-assisted chemical etching (MACE) procedure. Main structural parameters (pore size, layer thickness, morphology and nanograins size) and composition of PSi were investigated by means of X-Ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy. PL-spectroscopy of PSi was performed at room temperature and showed a wide emission band centered at 680 ± 20nm. Protein A was covalently immobilized …

Zinc oxide nanorod based immunosensing platform for the determination of human leukemic cells.

2019

Zinc oxide (ZnO) based nanostructures owing unique physical properties – high photoluminescence, bio- compatibility and other characteristics, therefore, they attract attention as building blocks suitable for biosensor development. In this research as a target we have used human leukemic cell line IM9 (IM9). IM9 was derived from the patient with a multiple myeloma and expressed cluster of differentiation proteins СD19 on the surface of 85–95% here investigated cancer cells. As a control sample healthy human's peripheral blood mononuclear cells (PBMC) were used and the expression of CD19 protein was found only in 5–9% of these cells. Two types of antibodies labeled by f…

Variable Thickness Porous Anodic Alumina/Metal Film Bilayers for Optimization of Plasmonic Scattering by Nanoholes on Mirror

2018

Continuously variable thickness porous anodic aluminum oxide (PAAO) films were obtained using electrochemical oxidation of bulk aluminum sheet while both electrodes were simultaneously withdrawn from the electrolyte solution. The thickness gradient was controlled by the withdrawal rate (1–10 mm/min range) and thickness variation demonstrated from below 50 nm to above 1 micrometer. The thickness increased linearly with the sample lateral coordinate, whereas the nanopore structure (diameter and interpore distance) remained unchanged. Effects of the initial pore growth and capillary forces are discussed. The presented method can be used for tuning optimal PAAO thickness for optical and other a…

Photoelectrochemical Bisphenol S Sensor Based on ZnO‐Nanoroads Modified by Molecularly Imprinted Polypyrrole

2019

Molecularly imprinted polymers are important tools for the design of sensors and other molecular recognition based analytical systems. In this paper the development of a photoelectrochemical sensor for selective bisphenol determination is reported. The sensor is based on a glass/ZnO/MIP‐Ppy structure consisting of glass modified by a ZnO layer (glass/ZnO), which is functionalized by molecularly imprinted conducting polymer polypyrrole (MIP‐Ppy). The sensitivity of the sensor to bisphenol is in the range of 0.7–12.5 µm. Selectivity tests to other bisphenolic compounds are performed. Some aspects of a photoinduced response mechanism in glass/ZnO/MIP‐Ppy nanostructures are predicte…

Mainīga biezuma nanoporaina alumīnija oksīda pārklāta ar metālu kārtiņu izgatavošana un optiskās īpašības

2018

Mainīga biezuma nanoporaina alumīnija oksīda pārklāta, ar metālu kārtiņu izgatavošana un optiskās īpašības. Jevdokimovs D., zinātniskais vadītājs Dr. Chem., asoc. prof. Erts D. un Dr. Chem. Popļausks R. Bakalaur darbs, 36 lappuses, 26 attēli, 22 tabulas, 31 literatūras avoti, 4 pielikumi. Latviešu valodā. Bakalaur darbā ir apskatīta un pētīta literatūrā pieejamā informācija par nepārtraukti maināma biezuma nanoporaina anodēta alumīnija oksīda (PAAO) plānu ķīļveida kārtiņu izgatavošanu, raksturošanu ar Au pārklājumu. Praktiskajā daļā tiek apskatīta eksperimentālā gaita: paraugu pirmsapstrāde, ķīļveida PAAO biezuma gradienta iegūšana izvelkot vienlaicīgi abus elektrodus no elektrolīta šķīduma…