Improved Testing Setup for Real-Time Monitoring of PMBs During Manufacturing and Rotational Viscosity Measurements

Polymer modified binders (PMBs) are a practical solution to design asphaltmixtures with superior performance. Although these polymers often improve bitumen properties to some extent, their final performance are linked to the accurate control of the properties during manufacturing and storage. However, some of the common procedures used to characterise neat bitumen are not suitable with these binders making their characterisation challenging. This study presents a novel laboratory procedure to produce SBS-MB through a real-time monitoring of the rotational viscosity, as well as an attempt to understand the suitability of current testing geometries to measure viscosity of such a complex bitum…

ENVIRONMENTAL IMPACT OF BIO-BASED ASPHALT MIXTURES: LIFE CYCLE INVENTORY, LIFE CYCLE ASSESSMENT AND RECOMMENDATIONS

Performance of a sustainable asphalt mix incorporating high RAP content and novel bio-derived binder

The recent drive to find ways to increase sustainability and decrease costs in asphalt paving has led researchers to find innovative ways to incorporate more recycled materials and bio-derived binders into mixes with varying success. A new novel bio-derived binder made from refined pine chemistry stabilised with a polymer can increase the sustainability of asphalt mixes while maintaining pavement performance. Laboratory performance testing was conducted on asphalt mixes containing 50% Reclaimed Asphalt Pavement (RAP) by mix weight and the novel bio-derived binder. Results show that the bio-derived binder outperforms the conventional 50/70 pen grade binder mixes with respect to resistance to…

Bio materials with reclaimed asphalt: from lab mixes properties to non-damaged full scale monitoring and mechanical simulation

Three innovative environmentally friendly pavement materials, designed with 50% of Reclaimed Asphalt and three different biomaterials (2 bio-additivated bitumens and 1 bio-binder), were produced in an industrial plant. These mixes were tested in lab and also at full scale using an Accelerated Pavement Test facility. The asphalt mix viscoelastic properties were measured in lab and their intrinsic viscoelastic response were simulated. These rheological models are used to simulate the pavement mechanical response using both elastic and viscoelastic multilayer codes. Hence, full scale measurement performed during the full scale test at an early stage (without damages) can be compared with these…

Organic Compounds Evaluation from Fumes Generated in Laboratory by Bio-recycled Asphalt Mixtures

Using bio-binder and bio-additives as recycling agents for asphalt mixtures with high-content of reclaimed asphalt (RA) is proving to be feasible. It is still not clear whether this combination might provide new hazardous emissions from airborne binder fumes. The health hazard related to airborne bitumen fume generation is primarily relevant for paving crews while there is little opportunity for exposure related to asphalt plant workers. In this study, measurements of gaseous organic compounds from airborne binder fumes of selected bio-asphalt mixtures have been measured during the laboratory mixing process, by using a thermo-mixer equipped with a chimney at University Gustave Eiffel. Param…

Full-scale validation of bio-recycled asphalt mixtures for road pavements

Abstract Recycling of asphalt has become a well-established practice in many countries, however the road pavement industry remains a bulk consumer of extracted raw materials. Novel solutions that find root in circular economy concepts and life-cycle approaches are needed in order to enable optimisation of infrastructure resource efficiency, starting from the design stage and spanning the whole value chain in the construction sector. Itis within this framework that the present study presents a full-scale validation of asphalt mixtures specifically designed to ensure durability of flexible road pavements and at the same time enabling the reuse of reclaimed asphalt pavement (RAP) through the i…

Interpreting Life Cycle Assessment results of bio-asphalt pavements for more informed decision-making

Due to emerging climate challenges, engineers are looking to replace the conventional asphalt pavements by utilizing bio-materials combined with Reclaimed Asphalt (RA). However, there is insufficient record in the literature assessing their environmental performance. This study addresses the analysis of the results obtained from a life cycle assessment exercise of asphalt pavements containing bio-materials and RA within their binder courses, developed within the BioRePavation project. The aim is to analyze the environmental benefits achieved, by means of hotspot mapping and sensitivity analysis of the most impactful factors of their lifecycles. Two alternatives are compared to a conventiona…

From Laboratory Mixes Evaluation to Full Scale Test: Fatigue Behavior of Bio-Materials Recycled Asphalt Mixtures

The present paper describes the full-scale accelerated test, carried out on asphalt pavements made up with bio-materials, especially designed to help reusing Reclaimed Asphalt (RA) by re-activating the aged binder. Four pavement sections were evaluated: three pavement sections with innovative bio-materials (bio-recycled asphalt mixtures), and a reference section with a conventional, high modulus asphalt mix (EME2). In this study, fatigue resistance was first evaluated in laboratory, with two-points bending test, and then at full scale under heavy traffic loading, with the IFSTTAR accelerated pavement testing facility. The evolution of bio-materials recycled asphalt mixture characteristics, …

Linear viscoelastic properties of high reclaimed asphalt content mixes with biobinders

The use of high Reclaimed Asphalt (RA) content mixtures together with binders produced from renewable resources (biobinders) is one of the current challenges in pavement engineering research. On the one hand, RA has been used for decades, but there are still some concerns about its performance, especially when high contents are used (>30%). On the other hand, biobinders are relatively new materials, which have to be deeply characterised and studied in order to develop good practices for their use. In this paper, linear viscoelastic properties of biobinders and bio-mixtures manufactured with high RA content and biobinders are analysed and discussed. High-modulus mixtures with 50% RA were…

Organic Compounds Evaluation from Fumes Generated in Laboratory by Bio-recycled Asphalt Mixtures

Using bio-binder and bio-additives as recycling agents for asphalt mixtures with high-content of reclaimed asphalt (RA) is proving to be feasible. It is still not clear whether this combination might provide new hazardous emissions from airborne binder fumes. The health hazard related to airborne bitumen fume generation is primarily relevant for paving crews while there is little opportunity for exposure related to asphalt plant workers. In this study, measurements of gaseous organic compounds from airborne binder fumes of selected bio-asphalt mixtures have been measured during the laboratory mixing process, by using a thermo-mixer equipped with a chimney at Univ Gustave Eiffel. Parameters …

From Laboratory Mixes to Full Scale Test: Rutting Evaluation of Bio-recycled Asphalt Mixes

The present paper describes the rutting behavior of innovative mixes incorporating 50% of Reclaimed Asphalt (RA) with bio-materials. They were assessed in the laboratory and in a full-scale accelerated experiment. The innovative mixes studied here contained bio-materials especially designed to help recycling by re-activating the aged binder from RA. Four mixes were evaluated: three of them are manufactured with bio-materials, (two bio-rejuvenators and one bio-binder) and one was a control mix, which was a high modulus asphalt mix (EME2). In this study, the rutting resistance of the four mixes was first evaluated in the laboratory with both European and US methods. The full-scale test was th…