0000000000459087
AUTHOR
A. Brevet
Surface preparation influence on the initial stages of MOCVD growth of TiO2 thin films
In situ chemical surface analyses using X-ray photoelectron spectroscopy (XPS), completed by ex situ atomic force microscopy (AFM) analyses, were performed in order to compare the initial stages of MOCVD growth of TiO 2 thin films on two different surface types. The first type was a silicon native oxide free hydrogen terminated surface and the second one was a silicon dioxide surface corresponding to a thin layer of 3.5 nm thick in situ thermally grown on silicon substrate. Si(100) was used as substrate, and the growths of TiO 2 thin films were achieved with titanium tetraisopropoxide (TTIP) as precursor under a temperature of 675 °C, a pressure of 0.3 Pa and a deposition time of 1 h. Whate…
ARXPS double layers model for in-situ characterization of MOCVD nanometric films.
Communication orale
Interfacial reaction during MOCVD growth revealed by in situ ARXPS.
International audience; Angle-resolved X-ray photoelectron spectroscopy (ARXPS) experiments were performed to study in situ the reaction at the film–substrate interface during metal organic chemical vapor deposition (MOCVD) growth of TiO2 thin films deposited on the silicon substrate. The in-depth distribution of chemical species was determined using several ARXPS thickness calculation models considering either single or bilayer systems. By the comparison of two single-layermodels, the presence of a second layer composed of silicon oxidewas evidenced. High-resolution transmission electron microscopy (HRTEM) observations confirmed the stratification of the film in two layers, as well as the …
Angle resolved X-ray photoemission spectroscopy double layer model for in situ characterization of metal organic chemical vapour deposition nanometric films.
International audience; In situ Angle Resolved X-ray Photoemission Spectroscopy (ARXPS) characterizations of TiO2 thin films grown on silicon by Metal Organic Chemical Vapour Deposition were performed in order to get information on interfacial reactions at the first stages of the growth, one of the aims being to understand the influence of deposition conditions. Thickness measurements were also carried out from ARXPS analyses. As the real structure of the films was shown to be a double layer system such as TiO2/SiO2/Si, an ARXPS model of thickness and surface coverage determination was applied to each layer independently. However, the application of this model to very thin films underestima…
Initial stages of TiO2 thin films MOCVD growth studied by in situ surface analyses
Abstract In situ chemical surface analyses using X-ray photoelectron spectroscopy (XPS) were performed to understand the initial stages of TiO 2 thin-film MOCVD growth. Deposits on Si (1 0 0), a few nanometres thick, were obtained at a fixed temperature of 650 °C and for two different pressures, 2.9 and 0.05 mbar, using titanium tetraisopropoxide (TTIP) as precursor. Pressure lowering led to a higher deposit growth rate. Reduction of titanium with respect to stoichiometric titanium dioxide and oxidation of the wet-cleaned silicon substrate are observed from decomposition of the Ti 2p and Si 2p peaks. The formation of a TiSi x O y mixed oxide is also pointed out and confirmed by the presence…
Reactivity between molybdenum and TiO2(110) surfaces: evidence of a sub-monolayer mode and a multilayer mode
Small amounts of molybdenum (from 0.03 to 1.3 eqML) were deposited on non-stoichiometric TiO 2 (1 1 0) surface. The deposits were investigated by means of LEED and X-ray/UV photoemission using synchrotron radiation. For the smallest coverage (<0.2 eqML), deposition leads to oxidation of molybdenum into species close to Mo 4+ .In such a case, states appearing in TiO 2 band gap are mainly due to reduced titanium. For higher coverages, metallic behaviour of molybdenum is observed. This phenomenon was explained, thanks to first principle calculations, as a decrease of the Mo-O interactions for the benefit of the Mo-Mo interactions as the surface molybdenum atom density increases.
Thermal effects on the growth by metal organic chemical vapour deposition of TiO2 thin films on (100) GaAs substrates
Abstract TiO 2 thin films were deposited on (100) GaAs substrates by LP-MOCVD with deposition temperatures ( T d ) ranking from 450 to 750 °C. The structure of these layers was studied by X-ray diffraction (XRD) and Raman spectroscopy. The growth of the TiO 2 anatase phase was observed for T d T d >600 °C. Finally, X-ray photoelectron spectrometry (XPS) and secondary ion mass spectroscopy (SIMS) experiments showed the presence of small quantities of Ga and As through the whole film thickness, slightly increasing at the surface of the layers. This result was related to the SEM observations and explained by considering the growth conditions.