Dental wear proxy correlation in a long-term feeding experiment on sheep ( Ovis aries )

Dietary reconstruction in vertebrates often relies on dental wear-based proxies. Although these proxies are widely applied, the contributions of physical and mechanical processes leading to meso- and microwear are still unclear. We tested their correlation using sheep ( Ovis aries , n = 39) fed diets of varying abrasiveness for 17 months as a model. Volumetric crown tissue loss, mesowear change and dental microwear texture analysis (DMTA) were all applied to the same teeth. We hereby correlate: (i) 46 DMTA parameters with each other, for the maxillary molars (M1, M2, M3), and the second mandibular molar (m2); (ii) 10 mesowear variables to each other and to DMTA for M1, M2, M3 and m2; and (…

The turnover of dental microwear texture: Testing the" last supper" effect in small mammals in a controlled feeding experiment

Dental microwear texture (DMT) analysis is commonly applied for dietary reconstruction of vertebrates. The temporal scale on which dietarily informative microscopic wear forms on enamel surfaces is crucial to infer dietary flexibility and seasonality. Microwear is assumed to form shortly before the individual's death, reflecting information pertaining to the last meals consumed (“last supper” effect). In primate feeding experiments, microwear features formed within hours, suggesting rates of turnover within one to two weeks. As DMT formation experiments testing the persistence of microwear three-dimensionally (textures) are still lacking, we test how quickly DMTs form and pr…

Species-specific enamel differences in hardness and abrasion resistance between the permanent incisors of cattle (Bos primigenius taurus) and the ever-growing incisors of nutria (Myocastor coypus).

Hypselodont (ever-growing) teeth of lagomorphs or rodents have higher wear rates (of a magnitude of mm/week), with compensating growth rates, compared to the non-ever-growing teeth of ungulates (with a magnitude of mm/year). Whether this is due to a fundamental difference in enamel hardness has not been investigated so far. We prepared enamel samples (n = 120 per species) from incisors of cattle (Bos primigenius taurus) and nutria (Myocastor coypus, hypselodont incisors) taken at slaughterhouses, and submitted them to indentation hardness testing. Subsequently, samples were split into 4 groups per species (n = 24 per species and group) that were assessed for abrasion susceptibility by a sta…

A simple CO 2 equilibration method for measuring blood oxygen isotope compositions

Root growth compensates for molar wear in adult goats (Capra aegagrus hircus)

One reason for the mammalian clade’s success is the evolutionary diversity of their teeth. In herbivores, this is represented by high‐crowned teeth evolved to compensate for wear caused by dietary abrasives like phytoliths and grit. Exactly how dietary abrasives wear teeth is still not understood completely. We fed four different pelleted diets of increasing abrasiveness (L: Lucerne; G: grass; GR: grass and rice husks; GRS: grass, rice husks, and sand) to four groups of a total of 28 adult goats, all with completely erupted third molars, over a six‐month period. Tooth morphology was captured by medical computed tomography scans at the beginning and end of the controlled feeding experiment, …

Nitrogen isotopes in tooth enamel record diet and trophic level enrichment: results from a controlled feeding experiment

Nitrogen isotope ratios (δ15N) are a well-established tool for investigating the dietary and trophic behavior of animals in terrestrial and marine food webs. To date, δ15N values in fossils have primarily been measured in collagen extracted from bone or dentin, which is susceptible to degradation and rarely preserved in deep time (>100,000 years). In contrast, tooth enamel organic matter is protected from diagenetic alteration by the mineral structure of hydroxyapatite and thus is often preserved over geological time. However, due to the low nitrogen content (<0.01 %) of enamel, the measurement of its nitrogen isotopic composition has been prevented by the analytical limit…

Dental microwear texture analysis correlations in guinea pigs (Cavia porcellus) and sheep (Ovis aries) suggest that dental microwear texture signal consistency is species-specific

Biology of the sauropod dinosaurs: the evolution of gigantism

The herbivorous sauropod dinosaurs of the Jurassic and Cretaceous periods were the largest terrestrial animals ever, surpassing the largest herbivorous mammals by an order of magnitude in body mass. Several evolutionary lineages among Sauropoda produced giants with body masses in excess of 50 metric tonnes by conservative estimates. With body mass increase driven by the selective advantages of large body size, animal lineages will increase in body size until they reach the limit determined by the interplay of bauplan, biology, and resource availability. There is no evidence, however, that resource availability and global physicochemical parameters were different enough in the Mesozoic to ha…

ACKERMANS et al.

One reason for the mammalian clade’s success is the evolutionary diversity of their teeth. In herbivores, this is represented by high‐crowned teeth evolved to compensate for wear caused by dietary abrasives like phytoliths and grit. Exactly how dietary abrasives wear teeth is still not understood completely. We fed four different pelleted diets of increasing abrasiveness (L: Lucerne; G: grass; GR: grass and rice husks; GRS: grass, rice husks, and sand) to four groups of a total of 28 adult goats, all with completely erupted third molars, over a six‐month period. Tooth morphology was captured by medical computed tomography scans at the beginning and end of the controlled feeding experi…

The way wear goes: phytolith-based wear on the dentine–enamel system in guinea pigs (Cavia porcellus)

The effect of phytoliths on tooth wear and function has been contested in studies of animal–plant interactions. For herbivores whose occlusal chewing surface consists of enamel ridges and dentine tissue, the phytoliths might particularly erode the softer dentine, exposing the enamel ridges to different occlusal forces and thus contributing to enamel wear. To test this hypothesis, we fed guinea pigs (Cavia porcellus; n = 36 in six groups) for threeweeks exclusively on dry or fresh forage of low(lucerne), moderate (fresh timothy grass) or very high (bamboo leaves) silica content representing corresponding levels of phytoliths. We quantified the effect of these treatments with measuremen…

Supplemental Material from The way wear goes: phytolith-based wear on the dentine–enamel system in guinea pigs (Cavia porcellus)

Additional table for individual tooth measurements as well as graphs illustrating tooth structure, tooth measurements and buccal tooth height.

Forage silica and water content control dental surface texture in guinea pigs and provide implications for dietary reconstruction.

Significance Ingesta leave characteristic wear features on the tooth surface, which enable us to reconstruct the diet of extant and fossil vertebrates. However, whether dental wear is caused by internal (phytoliths) or external (mineral dust) silicate abrasives is controversially debated in paleoanthropology and biology. To assess this, we fed guinea pigs plant forages of increasing silica content (lucerne < grass < bamboo) without any external abrasives, both in fresh and dried state. Abrasiveness and enamel surface wear increased with higher forage phytolith content. Additionally, water loss altered plant material properties. Dental wear of fresh grass feeding was similar to lucerne brows…

Dust and grit matter: abrasives of different size lead to opposing dental microwear textures in experimentally fed sheep (Ovis aries)

ABSTRACT External abrasives ingested along with the herbivore diet are considered main contributors to dental wear, though how the different sizes and concentrations of these abrasives influence wear remains unclear. Dental microwear texture analysis (DMTA) is an established method for dietary reconstruction which describes a tooth9s surface topography on a micrometre scale. The method has yielded conflicting results as to the effect of external abrasives. In the present study, a feeding experiment was performed on sheep (Ovis aries) fed seven diets of different abrasiveness. Our aim was to discern the individual effects of size (4, 50 and 130 µm) and concentration (0%, 4% and 8% of dry mat…

Dental wear at macro- and microscopic scale in rabbits fed diets of different abrasiveness: A pilot investigation

To differentiate the effects of internal and external abrasives on tooth wear, we performed a controlled feeding experiment in rabbits fed diets of varying phytolith content as an internal abrasive and with addition of sand as an external abrasive. 13 rabbits were each fed one of the following four pelleted diets with different abrasive characteristics (no phytoliths: lucerne L; phytoliths: grass G; more phytoliths: grass and rice hulls GR; phytoliths plus external abrasives: grass, rice hulls and sand GRS) for two weeks. At the end the feeding period, three tooth wear proxies were applied to quantify wear on the cheek teeth at macroscopic and microscopic wear scales: CT scans were obtained…

Fatty Acids of Microbial Origin in the Perirenal Fat of Rats (Rattus norvegicus domestica) and Guinea Pigs (Cavia porcellus) Fed Various Diets.

Guinea pigs are assumed to practice caecotrophy to a higher degree than rats. Studies from leporids suggest that through the practice of caecotrophy, hindgut fermenting species could build up microbial fatty acids (FA) in body tissues. We hypothesized that microbial FA would be detectable in the body tissue of guinea pigs and rats, and this to a higher degree in guinea pigs. Twenty-four rats and guinea pigs were fed with four different pelleted diets (lucerne-, meat-, meat-bone-, insect-based) in groups of six animals for 8 weeks. Perirenal adipose tissue differed in FA composition between the species in spite of the common diets. FA typically associated with microbial activity (saturated F…

Digestion of bamboo compared to grass and lucerne in a small hindgut fermenting herbivore, the guinea pig (Cavia porcellus)

Bamboo is an enigmatic forage, representing a niche food for pandas and bamboo lemurs. Bamboo might not represent a suitable forage for herbivores relying on fermentative digestion, potentially due to its low fermentability. To test this hypothesis, guinea pigs (n = 36) were used as model species and fed ad libitum with one of three forages (bamboo, lucerne, or timothy grass) in a fresh or dried state, with six individuals per group, for 3 weeks. The nutrient composition and in vitro fermentation profile of bamboo displayed low fermentation potential, i.e. high lignin and silica levels together with a gas production (Hohenheim gas test) at 12 h of only 36% of that of lucerne and grass. Alth…

Dental microwear texture gradients in guinea pigs reveal that material properties of the diet affect chewing behaviour

ABSTRACT Dental microwear texture analysis (DMTA) is widely used for diet inferences in extant and extinct vertebrates. Often, a reference tooth position is analysed in extant specimens, while isolated teeth are lumped together in fossil datasets. It is therefore important to test whether dental microwear texture (DMT) is tooth position specific and, if so, what causes the differences in wear. Here, we present results from controlled feeding experiments with 72 guinea pigs, which received either fresh or dried natural plant diets of different phytolith content (lucerne, grass, bamboo) or pelleted diets with and without mineral abrasives (frequently encountered by herbivorous mammals in natu…

Shape, size, and quantity of ingested external abrasives influence dental microwear texture formation in guinea pigs

Food processing wears down teeth, thus affecting tooth functionality and evolutionary success. Other than intrinsic silica phytoliths, extrinsic mineral dust/grit adhering to plants causes tooth wear in mammalian herbivores. Dental microwear texture analysis (DMTA) is widely applied to infer diet from microscopic dental wear traces. The relationship between external abrasives and dental microwear texture (DMT) formation remains elusive. Feeding experiments with sheep have shown negligible effects of dust-laden grass and browse, suggesting that intrinsic properties of plants are more important. Here, we explore the effect of clay- to sand-sized mineral abrasives (quartz, volcanic ash, loess,…

Use of running plates by floor housed rats: A pilot study

The outfit of husbandry facilities of, and the enrichment provided for, experimental rodents plays an important role in the animals’ welfare, and hence also for the societal acceptance of animal experiments. Whether rats and mice benefit from being provided with running wheels or plates is discussed controversially. Here we present observations from a feeding experiment, where rats were provided a running plate. As a pilot study, six identical cages, with three animals per cage, were filmed for six days, and the resulting footage was screened for the number of bouts and the time the animals spent on the plates. The main activities observed on the plate in descending order were sitting (18.…

sj-pdf-1-lan-10.1177_00236772211036572 - Supplemental material for Use of running plates by floor housed rats: A pilot study

Supplemental material, sj-pdf-1-lan-10.1177_00236772211036572 for Use of running plates by floor housed rats: A pilot study by Jessica Frei, Marcus Clauss, Daniela E Winkler, Thomas Tütken and Louise F Martin in Laboratory Animals

Everything matters: Molar microwear texture in goats (Capra aegagrus hircus) fed diets of different abrasiveness

There is an ongoing discourse about whether or not external abrasives influence the microscopic wear in herbivore teeth, including a statement that &ldquo;dust does not matter&rdquo;. We submitted the maxillary and mandibular second molar of 28 goats (Capra aegagrus hircus) to dental microwear texture analysis (DMTA). The study animals were divided into four groups, which received diets of increasing phytolith-based abrasiveness (L: lucerne based pellets, very low phytolith abrasion diet, acting as control; G: grass-based pellets, medium abrasive phytolith diet; GR: grass and rice husk pellets, high abrasion phytolith diet), or a diet with added external abrasives (GRS: the GR diet with add…

Microwear textures associated with experimental near-natural diets suggest that seeds and hard insect body parts cause high enamel surface complexity in small mammals

In mammals, complex dental microwear textures (DMT) representing differently sized and shaped enamel lesions overlaying each other have traditionally been associated with the seeds and kernels in frugivorous diets, as well as with sclerotized insect cuticles. Recently, this notion has been challenged by field observations as well as in vitro experimental data. It remains unclear to what extent each food item contributes to the complexity level and is reflected by the surface texture of the respective tooth position along the molar tooth row. To clarify the potential of seeds and other abrasive dietary items to cause complex microwear textures, we conducted a controlled feeding experiment wi…

Controlled feeding experiments with diets of different abrasiveness reveal slow development of mesowear signal in goats ( Capra aegagrus hircus )

ABSTRACT Dental mesowear is applied as a proxy to determine the general diet of mammalian herbivores based on tooth-cusp shape and occlusal relief. Low, blunt cusps are considered typical of grazers and high, sharp cusps typical of browsers. However, how internal or external abrasives impact mesowear, and the time frame the wear signature takes to develop, still need to be explored. Four different pelleted diets of increasing abrasiveness (lucerne, grass, grass and rice husks, and grass, rice husks and sand) were fed to four groups of a total of 28 adult goats in a controlled feeding experiment over a 6-month period. Tooth morphology was captured by medical CT scans at the beginning and end…

Within trophic level shifts in collagen-carbonate stable carbon isotope spacing are propagated by diet and digestive physiology in large mammal herbivores

Stable carbon isotope analyses of vertebrate hard tissues such as bones, teeth, and tusks provide information about animal diets in ecological, archeological, and paleontological contexts. There is debate about how carbon isotope compositions of collagen and apatite carbonate differ in terms of their relationship to diet, and to each other. We evaluated relationships between &delta;13Ccollagen and &delta;13Ccarbonate among free-ranging southern African mammals to test predictions about the influences of dietary and physiological differences between species. Whereas the slopes of &delta;13Ccollagen&ndash;&delta;13Ccarbonate relationships among carnivores are &le;1, herbivore &delta;13Ccollag…

Strontium Uptake and Intra-Population 87Sr/86Sr Variability of Bones and Teeth—Controlled Feeding Experiments With Rodents (Rattus norvegicus, Cavia porcellus)

Strontium isotopes in biogenic apatite, especially enamel, are widely employed to determine provenance and track migration in palaeontology and archaeology. Body tissues record the 87Sr/86Sr of bioavailable Sr of ingested food and water. To identify non-local individuals, knowledge of the 87Sr/86Sr of a non-migratory population is required. However, varying factors such as tissue turnover rates, feeding selectivity, Sr content, digestibility of food, and the ingestion of mineral dust can influence body tissue 87Sr/86Sr. To evaluate the Sr contribution of diet and water to mammalian hard tissues 87Sr/86Sr, controlled feeding studies are necessary. Here we present 87Sr/86Sr from controlled fe…

Data from: Controlled feeding experiments with diets of different abrasiveness reveal slow development of mesowear signal in goats (Capra aegagrus hircus)

Dental mesowear is applied as a proxy to determine the general diet of mammalian herbivores based on tooth-cusp shape and occlusal relief. Low, blunt cusps are considered typical for grazers and high, sharp cusps typical for browsers. However, how internal or external abrasives impact mesowear, and the time frame the wear signature takes to develop, still need to be explored. Four different pelleted diets of increasing abrasiveness (lucerne, grass, grass and rice husks, grass, rice husks and sand) were fed to four groups of a total of 28 adult goats in a controlled feeding experiment over a six-month period. Tooth morphology was captured by medical CT scans at the beginning and end of the e…