0000000001319928

AUTHOR

Valdis Kokars

showing 45 related works from this author

Investigation of photoluminescence and amplified spontaneous emission properties of cyanoacetic acid derivative (KTB) in PVK amorphous thin films

2018

This work was supported by European Regional Development Fund within the Project No. 1.1.1.1/16/A/046 and A.Riekstins SIA “Mikrotīkls” donation, administered by University of Latvia Foundation.

guest-host systemAmplified spontaneous emissionQuenching (fluorescence)Materials sciencePhotoluminescenceDye lasercyanoacetic acid derivativeQuantum yieldglass forming low molecular weight compounds02 engineering and technology010402 general chemistry021001 nanoscience & nanotechnologyPhotochemistryThreshold energy7. Clean energy01 natural sciences0104 chemical sciencesAmorphous solidamplified spontaneous emission:NATURAL SCIENCES:Physics [Research Subject Categories]0210 nano-technologyLuminescencelaser dyesOrganic Electronics and Photonics: Fundamentals and Devices
researchProduct

Thermal and optical properties of red luminescent glass forming symmetric and non symmetric styryl-4H-pyran-4-ylidene fragment containing derivatives

2012

Abstract Dyes with amorphous structure deposited from organic solvents and having good fluorescence properties show potential for photonic device applications. Organic glass-forming symmetric and non symmetric styryl- derivatives of 2(2,6-substituted-4H-pyran-4-ylidene)-malononitrile (it has backbone of known laser dye 4-(dicyanomethylene)-2-methyl-6-[p-(dimethylamino)styryl]-4H-pyran), 2(2,6-substituted-4H-pyran-4-ylidene)-1H-indene-1,3(2H)-dione and 2(2,6-substituted-4H-pyran-4-ylidene)-pyrimidine-2,4,6(1H,3H,5H)-trione were synthesized and investigated. Glass transition temperatures higher than 110 °C were achieved. The absorption bands in dichloromethane solution cover the spectral regi…

Dye laserPhotoluminescenceChemistryOrganic ChemistryPhotochemistryFluorescenceAtomic and Molecular Physics and OpticsElectronic Optical and Magnetic MaterialsAmorphous solidInorganic Chemistrychemistry.chemical_compoundPyranElectrical and Electronic EngineeringPhysical and Theoretical ChemistryGlass transitionLuminescenceSpectroscopyDichloromethaneOptical Materials
researchProduct

Triphenyl moieties as building blocks for obtaining molecular glasses with nonlinear optical activity

2012

The incorporation of trityl and triphenylsilyl groups into low molecular weight molecules allows the formation of stable molecular glasses. A series of materials based on the N-phenyldiethanolamine core was synthesized bearing different azobenzenes and benzylydene-1,3-indandione as active chromophores. Molecular hyperpolarizability of the synthesized compounds was calculated by a restricted Hartree–Fock method with basis 6-31G(d,p) and measured in solutions by hyper-Rayleigh scattering. Non-linear optical (NLO) activity of the thin glassy films was confirmed after a corona poling procedure. Thermal sustainability of the NLO response of up to 85 °C was achieved. Quantum chemical calculations…

Steric effectsScatteringChemistryMaterials ChemistryHyperpolarizabilityMoietyMoleculeOrganic chemistryPhysical chemistryGeneral ChemistryChromophoreGlass transitionCorona polingJournal of Materials Chemistry
researchProduct

Stimulated emission and optical properties of pyranyliden fragment containing compounds in PVK matrix

2017

This work has been supported by National Research program “Multifunctional materials and composites, photonics and nanotechnology (IMIS2)”. Financial support provided by Scientific Research Project for Students and Young Researchers No. SJZ2015/12 realised at the Institute of Solid State Physics, University of Latvia is greatly acknowledged.

Amplified spontaneous emissionPhotoluminescenceMaterials scienceQuantum yieldElectron donor02 engineering and technologyPhotochemistry01 natural sciences010309 opticschemistry.chemical_compound0103 physical sciences:NATURAL SCIENCES:Physics [Research Subject Categories]Stimulated emissionElectrical and Electronic EngineeringAmplified spontaneous emissionGlass forming low molecular weight compoundsDCMLaser dyeDye laser021001 nanoscience & nanotechnologyThreshold energyAtomic and Molecular Physics and OpticsElectronic Optical and Magnetic MaterialschemistryPyranyliden derivatives0210 nano-technologyMethyl group
researchProduct

Pyranylidene indene-1,3-dione derivatives as an amorphous red electroluminescence material

2011

The organic light-emitting diode (OLED) has promising applications in flat-panel displays and novel light sources. Thus far, OLED structures have mostly been made by thermal evaporation in vacuum. An alternative approach is to use small molecules that form amorphous (glassy) structures from solutions. Such compounds can be used in ink-jet printing technologies and result in reduced OLED prices. We present an original red fluorescent organic compo- und 2-(2-(4-(bis(2-(trityloxy)ethyl)amino)styryl)-6-methyl-4H-pyran-4-ylidene)-1H-indene-1, 3(2H)-dione (ZWK1), and its derivative 2-(2,6-bis(4-(bis(2-(trityloxy)ethyl) amino)styryl)-4H- pyran-4-ylidene)-1H-indene-1,3(2H)-dione (ZWK2), where the m…

Materials scienceRenewable Energy Sustainability and the Environmentbusiness.industryAnalytical chemistryElectroluminescenceFluorescenceAtomic and Molecular Physics and OpticsAmorphous solidchemistry.chemical_compoundchemistryPEDOT:PSSOLEDOptoelectronicsIndeneLuminescencebusinessMethyl groupJournal of Photonics for Energy
researchProduct

Thermal and optical properties of 4H-pyran-4-ylidene fragment and bis-styryl and triphenyl groups containing derivatives

2014

Small D-π-A type organic molecules with incorporated 4H-pyan-4-ylidene (pyranylidene) fragment in their structures show potential in organic photonics - such as materials for organic light emitting diode application studies and organic solid state lasers. Additional incorporation of bulky triphenyl- groups in their structures gives them the ability to form thin amorphous solid films from volatile non-polar organic solvents. Unfortunately, there is still no clear relation between compound organic structures and their thermal and optical properties. In order to investigate the above mentioned regularities we have synthesized a series of tripheyl- group containing derivates of 2,6-bis-styryl-4…

chemistry.chemical_classificationchemistry.chemical_compoundPhotoluminescenceMaterials sciencechemistryOrganic photonicsThermal decompositionSubstituentElectron acceptorGlass transitionPhotochemistryDichloromethaneAmorphous solidSPIE Proceedings
researchProduct

Solid state solvation effect and reduced amplified spontaneous emission threshold value of glass forming DCM derivative in PMMA films

2015

Abstract Molecule crystallization is one of the limitations for obtaining high-gain organic laser systems. One of the examples is well known red laser dye 4-(dicyanomethylene)-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran (DCM). The lowest threshold value of amplified spontaneous emission was achieved by doping 2 wt% of DCM molecule in tris-(8-hydroxy quinoline) aluminum (Alq3) matrix. Further increase of the DCM dye concentration makes the system less efficient as its threshold value increases. It is due to large intermolecular interaction, which induces photoluminescence quenching. Compounds with reduced intermolecular interaction could be prospective in organic laser systems due to higher …

chemistry.chemical_classificationAmplified spontaneous emissionPhotoluminescenceDye laserOrganic laserMaterials scienceIntermolecular forceBiophysicsAnalytical chemistrySolvationGeneral ChemistryPolymerCondensed Matter PhysicsThreshold energyPhotochemistryBiochemistryAtomic and Molecular Physics and OpticschemistryJournal of Luminescence
researchProduct

<title>Hologram recording in azobenzene oligomers</title>

2003

Elementary hologram (holographic grating) recording and their coherent optical erasure have been experimentally studied in azobenzene oligomer (ABO) layers differing by their chemical composition, matrices and by the connection type of azobenzene chromophores to the matrix (dispersed or covalently bound). The best holographic parameters (7.9% diffraction efficiency and 86 J/cm2 specific recording energy) were achieved in the samples with covalent bonding to the matrix. Vector recording is also possible. Recording is unstable and reversible. The coherent optical erasure studies have shown its efficiency dependencies on the initial diffraction efficiency, erasing beam intensity and grating pe…

DiffractionMaterials scienceHolographic gratingbusiness.industryHolographyGratingDiffraction efficiencylaw.inventionchemistry.chemical_compoundOpticsAzobenzenechemistrylawbusinessRefractive indexDiffraction gratingSPIE Proceedings
researchProduct

Glass-Forming Nonsymmetric DWKdyes with 5,5,5-Triphenylpentyl and Piparazine Moieties for Lightamplification Studies

2018

This work has been supported by the European Regional Development Fund within the Activity 1.1.1.2 “Post-doctoral Research Aid” of the Specific Aid Objective 1.1.1 “To increase the research and innovative capacity of scientific institutions of Latvia and the ability to attract external financing, investing in human resources and infrastructure” of the Operational Programme “Growth and Employment” (No. 1.1.1.2/VIAA/1/16/035). Financial support provided by A. Riekstins SIA “Mikrotīkls” donation, administered by the University of Latvia is greatly appreciated. There are no conflicts of interest to declare.

PhotoluminescenceInfraredmolecular glasses02 engineering and technology010402 general chemistry01 natural sciencesamplified spontaneous emissionchemistry.chemical_compoundPolymer chemistry:NATURAL SCIENCES:Physics [Research Subject Categories]MoleculeThermal stability4 H -pyran-4-ylideneamplified spontaneous emission; laser dyes; 4H-pyran-4-ylidene; triphenyl moieties; piperazine moieties; molecular glasseslaser dyesMalononitrileRenewable Energy Sustainability and the Environmentpiperazine moieties021001 nanoscience & nanotechnologyAtomic and Molecular Physics and Optics0104 chemical sciencesPiperazinechemistryCovalent bond0210 nano-technologyLuminescencetriphenyl moieties
researchProduct

Synthesis and Spectroscopic Characteristics of Ligands Based on Quinolin-8-Ol as Useful Precursors for Alq3 Type Complexes

2021

In order to develop reliable methods for the synthesis of various 5-substituted-8-oxyquinoline derivatives for the preparation of Alq3-type complexes, we have improved the reaction conditions on some syntheses described in the literature, successfully synthesized new ligands based on quinolin-8-ol and characterized their chemical structures by NMR. Some of the synthesized quinolin-8-ol derivatives containing incorporated bulky triphenyl or tert-butyl groups showed blue luminescence in the solid state due to the possible aggregation induced emission enhancement (AIEE) with a maximum wavelength around 510 nm. More detailed light-emission property investigation of the mentioned bulky group con…

Mechanics of MaterialsChemistryStereochemistryMechanical EngineeringGeneral Materials ScienceKey Engineering Materials
researchProduct

Modular approach to obtaining organic glasses from low-molecular weight dyes using 1,1,1-triphenylpentane auxiliary groups: Nonlinear optical propert…

2013

Abstract A new modular synthetic approach to obtain organic glasses from low-molecular weight azobenzenes and stilbenes has been accomplished using 1,1,1-triphenylpentane crystallization preventing auxiliary groups. Six new structures show excellent solubility in non-polar solvents and thin films with good optical qualities have been obtained using a spin-coating technique. The glass transition temperatures of the new amorphous materials were in the range of 73–108 °C. The nonlinear optical activity in thin amorphous films was measured after a corona poling procedure.

Materials scienceProcess Chemistry and TechnologyGeneral Chemical EngineeringSecond-harmonic generationNonlinear opticsCorona polinglaw.inventionAmorphous solidchemistry.chemical_compoundAzobenzenechemistryChemical engineeringlawOrganic chemistryThin filmCrystallizationGlass transitionDyes and Pigments
researchProduct

Synthesis and Photoelectrical Properties of 3-(Diphenylamino)Carbazolyl-Functionalized DMABI Derivatives

2019

A modular approach was used in the synthesis of the 3-(diphenylamino)carbazolyl- functionalized 2-(4-(dimethylamino)benzylidene)-1H-indene-1,3(2H)-dione (DMABI) derivatives. For this purpose, carboxyl functional group was introduced into the framework of DMABI molecule. Additionally, a regioselective method for substitution of carbonyl group of DMABI with dicyanomethylene group was investigated and verified using the heteronuclear multiple bond correlation NMR spectra. Steglich esterification method was used to connect the 3‑(diphenylamino)carbazolyl moiety via an unconjugated spacer. The UV-Vis absorption spectra and molecular energy level data were obtained for the evaluation of the synth…

Thesaurus (information retrieval)chemistry.chemical_compoundChemical substancechemistryOrganic solar cellMechanics of MaterialsCarbazoleMechanical EngineeringRegioselectivityGeneral Materials ScienceScience technology and societyCombinatorial chemistryPolymer solar cellKey Engineering Materials
researchProduct

New Figure of Merit for Tailoring Optimal Structure of the Second Order NLO Chromophore for Guest-Host Polymers

2008

Reliability to forecast SHG efficiency using two sets of non linear optical (NLO) chromophore figures of merit (FOM) was tested. One of them predicts that SHG efficiency d 33 of the poled guest-host polymer is proportional to ground state dipole ∼ μg, another to ∼ 1/μg. Correlation of maximal achieved second order NLO efficiency of the PMMA based systems containing eight dimethylaminobenzylidene-1, 3-indandione (DMABI) related chromophores with proposed FOM have been analyzed. The best correlations were obtained with second set of FOM, especially if high dipole moment (μg > 7D) chromophores are included in analysis.

chemistry.chemical_classificationMaterials sciencebusiness.industryGeneral ChemistryPolymerChromophoreCondensed Matter PhysicsMoment (mathematics)DipoleNonlinear systemchemistryOrder (group theory)OptoelectronicsFigure of meritGeneral Materials SciencebusinessGround stateMolecular Crystals and Liquid Crystals
researchProduct

Synthesis, optical, and thermal properties of glassy trityl group containing luminescent derivatives of 2-tert-butyl-6-methyl-4H-pyran-4-one

2012

In this work we present simple preparation of original trityl group containing glassy luminescent 6-styryl substituted derivatives of 2-(2-tert-butyl-4H-pyran-4-ylidene)malononitrile (DWK-1TB), 2-(2-tert-butyl-4H-pyran-4-ylidene)-2- ethyl-2-cyanoacetate (KWK-1TB), 2-(2-tert-butyl-4H-pyran-4-ylidene)-1H-indene-1,3(2H)-dione (ZWK-1TB) and 5-(2-tert-butyl-4H-pyran-4-ylidene)pyrimidine-2,4,6(1H,3H,5H)-trione (JWK-1TB). Their optical properties have been investigated. The absorption maxima of synthesized glasses is in region from 425 nm to 515 nm and emission maxima is from 470 nm to 625 nm in solution of dichloromethane. But absorption maxima of their solid films is from 425 nm to 500 nm and em…

chemistry.chemical_classificationchemistry.chemical_compoundMaterials sciencechemistryThermal decompositionPhysical chemistryThermal stabilityPolymerAbsorption (chemistry)Glass transitionLuminescenceDichloromethaneMalononitrileOrganic Photonics V
researchProduct

Holographic recording of surface relief gratings in tolyle-based azobenzene oligomers

2008

Abstract Holographic recording of surface relief gratings (SRG) in tolyle-based azobenzene oligomer films have been carried out at 514.5 nm. It was experimentally studied by spectroscopic and AFM methods. The maximum surface modulation amplitude was 35 nm. SRG formation is explained by the mean-field model and by the photodegradation of chromophores enabling the directional mass transport as the result of trans–cis transformations. The conclusion is made that SRG are stable but the diffraction efficiency (DE) changes are due to the complementary decaying amplitude-phase gratings. Strong polarization dependences of transmitted and reflected DE are found. They are explained by the diffraction…

DiffractionMaterials sciencebusiness.industryMetals and AlloysHolographySurfaces and InterfacesGratingDiffraction efficiencySurfaces Coatings and FilmsElectronic Optical and Magnetic Materialslaw.inventionchemistry.chemical_compoundOpticsAzobenzenechemistrylawMaterials ChemistrybusinessAnisotropyRefractive indexDiffraction gratingThin Solid Films
researchProduct

Solution-processable green phosphorescent iridium(III) complexes bearing 3,3,3-triphenylpropionic acid fragment for use in OLEDs

2018

New solution-processable materials based on well-known green iridium(III) heteroleptic complexes (ppy) 2 Ir(acac) and (ppy) 2 Ir(pic) were acquired by chemical modification of ppy ligand with functionable hydroxyl groups and subsequent esterification with 3,3,3-triphenylpropionic acid fragment. Photoluminescence quantum efficiencies up to 0.90 were measured for the compounds in solution. Emission characteristics in pure solid films and different guest-host systems with hole transporting materials were investigated. Green light emitting OLEDs (organic light emitting devices) was prepared and characterized.

Materials sciencePhotoluminescencechemistryFragment (computer graphics)LigandOLEDChemical modificationchemistry.chemical_elementIridiumGreen-lightPhosphorescencePhotochemistryOrganic Electronics and Photonics: Fundamentals and Devices
researchProduct

Effects of steric encumbrance of iridium( iii ) complex core on performance of solution-processed organic light emitting diodes

2020

Iridium(iii) complexes are the most frequently applied commercialized green and red emitters for organic light emitting diode (OLED) displays. Throughout years a significant research effort has been devoted to modify these compounds, in order to make them suitable for cost-effective solution-processing techniques, such as inkjet printing. To achieve this, the inherent tendency of the complex molecules to form poorly emissive aggregates needs to be suppressed. In many cases this has been achieved by an encapsulation of the iridium(iii) complex core with dendritic structures, composed of either passive or charge-transporting fragments. In order to validate this approach, we acquired three str…

Steric effectsMaterials scienceGeneral Chemical Engineeringchemistry.chemical_element02 engineering and technologyTrapping010402 general chemistry7. Clean energy01 natural sciences:NATURAL SCIENCES:Physics [Research Subject Categories]OLEDMoleculeIridiumInkjet printingCommon emitterbusiness.industryGeneral Chemistry021001 nanoscience & nanotechnology0104 chemical sciencesSolution processedOrganic light emitting diodes (OLED)chemistryCharge trappingIridium compoundsOptoelectronics0210 nano-technologybusinessRSC Advances
researchProduct

Thermal, glass-forming, nonlinear optical and holographic properties of "push-pull" type azochromophores with triphenyl moieties containing isophoren…

2013

Molecular organic compounds with electron donating fragment bounded through π-conjugated system with electron acceptor fragment, as well as with incorporated triphenyl groups in their molecules show potential for creating cheap and simple solution processable materials with nonlinear optical properties. Additional insertion of azobenzene fragment in their structures makes them also possible to form holographic volume and surface relief gratings (SRG) after exposure to laser radiation, which could be useful for holographic data storage. For these purposes polymers are generally used. However, their application is complicated and challenging task as in every attempt to obtain the same polymer…

chemistry.chemical_classificationDiffractionMaterials sciencebusiness.industryPolymerHolographic data storageDiffraction efficiencyAmorphous solidchemistry.chemical_compoundchemistryAzobenzeneOptoelectronicsPhysical chemistryThermal stabilitybusinessGlass transitionSPIE Proceedings
researchProduct

Glass-forming derivatives of 2-cyano-2-(4H-pyran-4-ylidene) acetate for light-amplification systems

2019

Abstract A series of 2-cyano-2-(4H-pyran-4-ylidene) acetate derivatives with triphenyl and 9H-carbazole moieties were synthesized and investigated, mostly for potential applications in organic solid state lasers. Synthesized compounds show remarkable amorphous film formation ability, tunable thermal properties (thermal stability varies from 190 °C to 387 °C and glass transition temperature from 94 °C up to 141 °C) with light absorption from 400 nm to 600 nm and photoluminescence from 600 nm up to 800 nm. Dyes with incorporated mono-styryl- electron donating fragment (KTB, KTBC and KTB3K) showed higher photoluminescence quantum yield (PLQY) (from 16% up to 23%), significantly lower amplified…

Amplified spontaneous emissionDye laserPhotoluminescenceMaterials scienceProcess Chemistry and TechnologyGeneral Chemical EngineeringQuantum yield02 engineering and technology010402 general chemistry021001 nanoscience & nanotechnologyPhotochemistryLaser01 natural sciences0104 chemical sciencesAmorphous solidlaw.inventionlawThermal stability0210 nano-technologyGlass transitionDyes and Pigments
researchProduct

Optical and amplified spontaneous emission of neat films containing 2-cyanoacetic derivatives

2018

During the last two decades, small organic molecules have been widely studied for potential applications in organic solid-state lasers due to low-cost production, simple processing possibility and physical property tuning ability through chemical structure synthetic modifications. One of the most investigated and applied compound in dye lasers is 4- (dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM). It has shown remarkable properties as a dye in solid-state lasers. One of the drawbacks of this compound is high intermolecular interactions which reduce emission efficiency. Therefore it can be applied only in doped systems in low concentration (around 2 wt%). Recently we hav…

Amplified spontaneous emissionMaterials scienceDye laserPhotoluminescenceDopingIntermolecular forceQuantum yieldMoleculeThin filmPhotochemistryOrganic Electronics and Photonics: Fundamentals and Devices
researchProduct

Stereoselective synthesis and properties of 1,3-bis(dicyanomethylidene)indane-5-carboxylic acid acceptor fragment containing nonlinear optical chromo…

2016

A series of organic push–pull type chromophores using indane-1,3-dione 5-carboxylic acid (IDCA) and novel 1,3-bis(dicyanomethylidene)indane 5-carboxylic acid (CICA) electron acceptor fragments have been synthesized and characterized. NMR and X-ray analysis revealed that condensation reactions with the CICA fragment were stereoselective and yielded benzylidenes and azomethines with E double bond configurations. Due to the non-planar geometry these compounds are chiral and were acquired as a racemic mixture. The subsequent functionalization of the carboxylic acid group with 5,5,5-triphenylpentan-1-ol yielded solution-processable glass forming materials (6, 8, 10, 13) with glass transition tem…

chemistry.chemical_classificationMaterials scienceDouble bondCarboxylic acidIndane02 engineering and technologyGeneral ChemistryElectron acceptor010402 general chemistry021001 nanoscience & nanotechnologyPhotochemistryCondensation reaction01 natural sciencesAcceptor0104 chemical sciencesCrystallographychemistry.chemical_compoundchemistryMaterials ChemistryRacemic mixtureMolecule0210 nano-technologyJournal of Materials Chemistry C
researchProduct

Holographic properties of azobenzene oligomers with differently bonded chromophore groups

2007

Holographic properties of two types (I and II, specified in the text) of azobenzene oligomers (ABO) have been experimentally studied in the spectral region of low absorption at 633 nm. In the case of type I ABO the chromophore groups were covalently bonded to either tolyl-polyurethane or hexamethylene-polyurethane matrix. In the case of type II ABO azobenzene chromophores were dispersed in polystyrene matrix, and their concentration was varied from 0.005 to 0.200 mol/l. Samples were in the form of 10 µm thick films. In both cases the diffraction efficiency exposure time dependences were measured for the holographic grating period of 2 (m at 633 nm. The diffraction efficiency of more than 2%…

Matrix (chemical analysis)chemistry.chemical_compoundCrystallographyAzobenzenechemistryHolographic gratingCovalent bondPolymer chemistryPolystyreneAbsorption (chemistry)ChromophoreCondensed Matter PhysicsDiffraction efficiencyphysica status solidi c
researchProduct

Several Derivatives of 6-(Tert-Butyl)-4H-Pyran-4-Ylidene Malononitrile with Different Amorphous Phase Promoting Substituents for Light-Amplification …

2019

A series of glassy 6-(tert-butyl)-4H-pyran-4-ylidene malononitrile (DCM) derivatives with covalently attached amorphous state promoting bulky 1,1,1-triphenylmethyl (trityl) moieties through several chemical design approaches have been synthesized and investigated for suitability in organic solid state laser applications. Results showed that the bonding type of such functional groups had a considerable influence on glass structure forming dye thermal properties and a slight influence on their optical properties. Thermal stability up to 346 °C was achieved with glass transitions in the range from 39 to 138 °C. Incorporation of bulky triphenyl substituents via ester groups showed remarkable am…

Tert butylAmplified spontaneous emissionDye laserMaterials scienceMechanical EngineeringPhotochemistryAmorphous phasechemistry.chemical_compoundchemistryMechanics of MaterialsPyranMolecular glassesGeneral Materials ScienceMalononitrileKey Engineering Materials
researchProduct

Triphenyl group containing molecular glasses of azobenzene for photonic applications

2016

Abstract D-π-A type organic molecules have attracted considerable attention of scientists due to their potential applications in nonlinear optics and holographic data storage as light, flexible and low-cost photonic materials. To provide a better understanding on the relation between the compound chemical structure and their physical properties necessary for the mentioned purposes, eight glassy triphenyl group containing derivatives of azobenzene with incorporated 5,5-dimethylcyclohex-2-enylidene or 4H-pyran-4-ylidene structural fragments and dicyanomethylene, indene-1,3-dione and pyrimidine-2,4,6(1H,3H,5H)-trione acceptor groups have been synthesized and investigated. Thermal stability of …

Materials scienceOrganic solar cell02 engineering and technology010402 general chemistryPhotochemistry01 natural sciencesInorganic Chemistrychemistry.chemical_compoundOrganic chemistryMoleculeThermal stabilityElectrical and Electronic EngineeringPhysical and Theoretical ChemistrySpectroscopyOrganic ChemistryNonlinear optics021001 nanoscience & nanotechnologyAcceptorAtomic and Molecular Physics and Optics0104 chemical sciencesElectronic Optical and Magnetic MaterialsAmorphous solidAzobenzenechemistry0210 nano-technologyGlass transitionOptical Materials
researchProduct

Glassy 2-(1-benzyl-2-styryl-6-methylpyridin-4(1H)-ylidene) fragment containing 1H-indene-1,3(2H)-dione and pyrimidine-2,4,6(1H,3H,5H)-trione derivati…

2020

A series of 2-(1-benzyl-2-(styryl)-6-methylpyridin-4(1H)-ylidene) fragment containing glassy organic compounds have been synthesized from relevant luminescent 4H-pyran-4-ylidene derivatives and investigated as potential solution processable emitters. Glass transition temperatures of synthesized 1H-pyridine compounds are above 100°C with thermal stabilities higher than 260°C. In the solutions of dichloromethane their absorption bands are in the range from 350 nm to 500 nm with photoluminescence from 500 nm to 650 nm. In a contrary to the 4H-pyran-4-ylidene derivatives, the incorporation of various electron acceptor fragments within the 1H-pyridine fragment containing molecules only slightly …

chemistry.chemical_classificationAmplified spontaneous emissionchemistry.chemical_compoundMaterials sciencePhotoluminescencechemistryMoleculeAbsorption (chemistry)IndeneElectron acceptorGlass transitionPhotochemistryLuminescenceFiber Lasers and Glass Photonics: Materials through Applications II
researchProduct

HAPPY Dyes as Light Amplification Media in Thin Films

2021

A series of 1Hamorphous tri-phenyl pyridine (HAPPY) dyes have been synthesized from luminescent triphenyl-group-containing 2-methyl-6-styryl-substituted-4H-pyran-4-ylidene derivatives in reactions with benzylamine and investigated for suitability as solution-processable light-emitting medium components in thin films for amplified spontaneous emission (ASE). Conversion of a 4H-pyrane ring into a 1H-pyridine fragment enables aggregation-induced emission enhancement (AIEE) behavior in the target products and slightly increases thermal stability, glass transition temperatures, and ASE efficiency with PLQY up to 15% and ASE thresholds as low as 46 μJ/cm2 in neat spin-cast films, although thermal…

chemistry.chemical_classificationAmplified spontaneous emission010405 organic chemistryOrganic ChemistryDopingPolymer010402 general chemistryPhotochemistry01 natural sciences0104 chemical scienceschemistryThermal stabilityThin filmGlass transitionLuminescenceLasing thresholdThe Journal of Organic Chemistry
researchProduct

Nonlinear optical properties of low molecular organic glasses formed by triphenyl modified chromophores

2012

The series of organic molecular glasses have been studied as possible candidates for nonlinear optical (NLO) applications. Amorphous phase formation of investigated materials is ensured by the presence of bulky triphenyl substituents in molecular structure of NLO chromophores. Linear optical properties as well as NLO coefficients and thermal stability of NLO activity for the 13 molecular materials in glassy thin solid films have been determined. For the benzylidene-1,3-indandione chromophore containing compound the highest d33 value equal to 280 pm/V was measured under the 1064 nm excitation. Among the investigated compounds uppermost achieved thermal sustainability of NLO response was 108 …

Nonlinear opticalMaterials scienceStereochemistryMolecular glassesThermalPhysical chemistryMoleculeThermal stabilityChromophoreAmorphous phaseExcitationIOP Conference Series: Materials Science and Engineering
researchProduct

Glass-forming non-symmetric bis-styryl-DWK-type dyes for infra-red radiation amplification systems

2019

Abstract A series of D-π-A type organic dyes with bulky triphenylmethyl moiety containing 2,6-bis-(4-substituted)styryl-4H-pyran-4-ylidene donor (D) fragments and different electron acceptors (A) were synthesized and investigated, mostly for potential applications in organic solid-state lasers as infra-red (IR) radiation amplification medium. Dye glass transition temperature is above 99 °C with thermal stability in the region from 173 °C to 326 °C which was slightly influenced by the electron acceptor fragment attached to the 4H-pyrane ring in 4-position. Introducing substituents in 4-position within one of the styryl-fragments with stronger electron withdrawing properties decreased ASE exc…

chemistry.chemical_classificationAmplified spontaneous emissionActive laser mediumDye laserMaterials sciencePhotoluminescenceOrganic Chemistry02 engineering and technologyElectron acceptor010402 general chemistry021001 nanoscience & nanotechnologyPhotochemistry01 natural sciencesAtomic and Molecular Physics and Optics0104 chemical sciencesElectronic Optical and Magnetic MaterialsInorganic ChemistrychemistryMoietyThermal stabilityElectrical and Electronic EngineeringPhysical and Theoretical Chemistry0210 nano-technologyGlass transitionSpectroscopyOptical Materials
researchProduct

Amplified spontaneous emission of pyranyliden derivatives in PVK matrix

2016

One of the well-known red light emitting laser dyes is 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4Hpyran ( DCM ). Amplified spontaneous emission (ASE) has been widely investigated of DCM molecules or its derivatives in polymer or low molecular weight matrix. The main issue for these molecules is aggregation which limits doping concentration in matrix. Lowest ASE threshold values within concentration range of 2 and 4 wt% were obtained. In this work ASE properties of two original DCM derivatives in poly(N-vinylcarbazole) ( PVK ) at various concentrations will be discussed. One of the derivatives is the same DCM dye with replaced butyl groups at electron donor part with bulky try…

Amplified spontaneous emissionDye laserPhotoluminescencebusiness.industryChemistrySolvationQuantum yieldElectron donor02 engineering and technology010402 general chemistry021001 nanoscience & nanotechnologyPhotochemistryThreshold energy01 natural sciences0104 chemical scienceschemistry.chemical_compoundOptoelectronics0210 nano-technologyLuminescencebusinessSPIE Proceedings
researchProduct

Structure-dependent tuning of electro-optic and thermoplastic properties in triphenyl groups containing molecular glasses

2015

Abstract The series of seven molecular compounds composed of D–π–A chromophores and triphenylmethyl auxiliary groups were characterized by UV–Vis spectroscopy, differential scanning calorimetry and quantum chemical calculations. Nonlinear optical (NLO) properties of compounds were determined by second harmonic generation measurements in corona poled thin glassy films. The results show that triphenylmethyl auxiliary groups are effective at shielding undesirable dipole interactions in solid phase thus increasing NLO efficiency of materials. Thermal stability up to 108 °C was achieved for a polar order in poled samples.

Materials scienceDifferential scanning calorimetryPhase (matter)Second-harmonic generationOrganic chemistryPhysical chemistryGeneral Materials ScienceThermal stabilityThin filmChromophoreCondensed Matter PhysicsSpectroscopyAmorphous solidMaterials Chemistry and Physics
researchProduct

Amplified spontaneous emission of glass forming DCM derivatives in PMMA films

2014

4-(dicyanomethylene)-2-methyl- 6-(p-dimethylaminostyryl)-4H-pyran ( DCM ) is well known red laser dye which can be used also in solid state organic lasers. The lowest threshold value of amplified spontaneous emission was achieved by doping 2wt% of DCM molecule in tris-(8-hydroxy quinoline) aluminium (Alq

chemistry.chemical_classificationAmplified spontaneous emissionDye laserMaterials sciencebusiness.industryDopingQuinolinechemistry.chemical_elementPolymerPhotochemistryLaserlaw.inventionchemistry.chemical_compoundchemistryAluminiumlawOptoelectronicsbusinessLuminescenceSPIE Proceedings
researchProduct

An improved molecular design of obtaining NLO active molecular glasses using triphenyl moieties as amorphous phase formation enhancers

2012

New molecular design of obtaining molecular glasses has been developed by linking triphenylmethyl moieties to chromophore core by flexible C-C bridge. Compounds capable of forming stable amorphous phase with good optical quality have been acquired with increased chemical and thermal sustainability compared to the previously reported design. NLO activity of compounds has been measured after corona discharge polling. Compared to previously synthesized trityloxy fragment containing compounds increase of d 33 coefficient by up to 17 times was achieved for the same chromophore core containing compounds.

chemistry.chemical_compoundMaterials scienceAzobenzenechemistryMolecular glassesSecond-harmonic generationNonlinear opticsChromophorePhotochemistryAmorphous phaseCorona dischargeOptical qualitySPIE Proceedings
researchProduct

Toward device applicable second order NLO polymer materials: definition of the chromophore figure of merit

2007

Maximal achieved second order non linear optical (NLO) efficiency of the PMMA based host – guest systems containing eight dimethylaminobenzylidene -1, 3 - indandione (DMABI) related chromophores have been analysed. Two contradicting sets of NLO chromophore figure of merit (FOM) equations were tested. One of them predicts that NLO efficiency of the poled polymer host -guest film is proportional to ground state dipole d33 ~ 1/μg, another to d33 ~ 1/μg. The best correlations for the maximal achieved nonlinearity were obtained with second set of FOM, especially if high ground state dipole (μg > 7D) chromofores are included in analysis.

chemistry.chemical_classificationHistoryMaterials sciencebusiness.industryPolymerChromophoreMolecular physicsComputer Science ApplicationsEducationDipoleNonlinear systemchemistryOptoelectronicsOrder (group theory)Figure of meritbusinessGround stateJournal of Physics: Conference Series
researchProduct

Indanedione based binary chromophore supramolecular systems as a NLO active polymer composites

2010

Novel route to obtain EO material is proposed by supramolecular assembly of neutral-ground-state (NGS) and zwitterionic (ZWI) NLO chromophores in binary chromophore organic glass (BCOG) host–guest system. On a basis of our Langeven Dynamics (LD) molecular modeling combined with quantum chemical calculations, we have shown that anticipated enhancement NLO efficiency of BCOG material is possible via electrostatic supramolecular assembly of NGS with ZWI chromophore in antiparallel manner. Binding energy of such complex could be more dependent on molecular compatibility of components and local (atomic) charge distribution, then overall molecular dipole moments. According to our LD simulations t…

chemistry.chemical_classificationMolecular modelStereochemistryOrganic ChemistryBinding energySupramolecular chemistryPolymerChromophorePhotochemistryAtomic and Molecular Physics and OpticsElectronic Optical and Magnetic MaterialsSupramolecular assemblyInorganic Chemistrychemistry.chemical_compoundDipolechemistryPyridiniumElectrical and Electronic EngineeringPhysical and Theoretical ChemistrySpectroscopyOptical Materials
researchProduct

Synthesis and investigation of charge transport properties in adducts of hole transporting carbazole derivatives and push-pull azobenzenes

2019

Abstract In order to investigate the viability of a material design for bulk heterojunction (BHJ) organic solar cells, where hole transporting group is bound to the donor moiety, we report the synthesis and charge transport characteristics of 3-(diphenylamino)carbazolyl-functionalized derivatives of 2-(4-((4-(dimethylamino)phenyl)diazenyl)benzylidene)-1H-indene-1,3-dione (DMAAzi) chromophore. Three different bounding configurations were examined in these adducts. Additionally, a trityl-functionalized derivative of DMAAzi was prepared and used for comparison purposes. All of the synthesized materials form thin amorphous films from volatile organic solvents and exhibit glass transition temper…

Materials scienceOrganic solar cellCarbazole02 engineering and technologyGeneral ChemistryChromophore010402 general chemistry021001 nanoscience & nanotechnologyCondensed Matter PhysicsPhotochemistry01 natural sciencesPolymer solar cell0104 chemical sciencesAmorphous solidchemistry.chemical_compoundchemistryElectron affinityGeneral Materials ScienceCharge carrier0210 nano-technologyGlass transitionJournal of Physics and Chemistry of Solids
researchProduct

Solution processable piperazine and triphenyl moiety containing non-symmetric bis-styryl-DWK type molecular glasses with light-emitting and amplified…

2018

A series of 2,6-bis-styryl-4H-pyran-4-ylidene fragment containing glassy organic compounds with chemically stable bonding of amorphous phase promoting bulky triphenyl moieties through piperazine structural fragment (DWK-T dyes) in a form of 2-(5,5,5-triphenylpentyl)piperazin-1-yl)styryl)-substituent have been synthesized and investigated as the potential gain medium component for organic solid state laser applications. Physical properties of the dyes vary and are mostly depending from the other styryl-substituent attached to the 4H-pyran-4-ylidene backbone fragment in 6-position. Thermal stability of synthesized dyes is above 312°C with the glass transitions from 97°C to 109°C. Obtained nea…

Amplified spontaneous emissionActive laser mediumDye laserPhotoluminescenceMaterials science02 engineering and technology010402 general chemistry021001 nanoscience & nanotechnologyPhotochemistry01 natural sciences0104 chemical sciencesPiperazinechemistry.chemical_compoundchemistryCovalent bondMoietyThermal stability0210 nano-technologyOrganic Light Emitting Materials and Devices XXII
researchProduct

Solution processable 2-(trityloxy)ethyl and tert-butyl group containing amorphous molecular glasses of pyranylidene derivatives with light-emitting a…

2015

Abstract Small organic molecules with incorporated 4 H -pyran-4-ylidene (pyranylidene) fragment as the π-conjugation system which bonds the electron acceptor fragment (A) with electron donor part (D) in the molecule – also well known as derivatives of 4-(dicyano-methylene)-2-methyl-6-[p-(dimethylamino)styryl]-4H-pyran ( DCM ) laser dye-have attracted considerable attention of scientists as potential new generation materials for organic photonics and molecular electronics due to their low-cost fabrication possibility, flexibility and low-weight. Six glassy derivatives of 4 H -pyran-4-ylidene (pyranylidene) with attached bulky 2-(trityloxy)ethyl and tert -butyl groups are described in this re…

chemistry.chemical_classificationPhotoluminescenceMaterials scienceOrganic ChemistryElectroluminescenceElectron acceptorPhotochemistryAtomic and Molecular Physics and OpticsElectronic Optical and Magnetic MaterialsAmorphous solidInorganic ChemistrychemistryMoleculeLight emissionElectrical and Electronic EngineeringPhysical and Theoretical ChemistryGlass transitionHOMO/LUMOSpectroscopyOptical Materials
researchProduct

Synthesis and nonlinear optical properties of novel N,N-dihydroxyethyl-based molecular organic glasses using triaryl substitutes as amorphous phase f…

2011

In given study a new structural design of molecular NLO materials is presented where amorphous phase formation is achieved by introduction of bulky trityl and triphenylsilyl substituents. Obtained materials formed stable organic glasses with good optical quality and glass transition temperatures notably exceeding ambient. NLO activity was successfully measured in samples that underwent corona discharge poling. The comparison of both enhancer groups revealed, that trityl group increases thermal sustainability of material, while triphenylsilyl group better promotes formation and stability of amorphous phase.

Materials sciencebusiness.industryPolingSecond-harmonic generationNonlinear opticsAmorphous phasechemistry.chemical_compoundNonlinear opticalOpticsAzobenzenechemistryPhysical chemistrybusinessGlass transitionCorona dischargeSPIE Proceedings
researchProduct

3,3'-Bicarbazole structural derivatives as charge transporting materials for use in OLED devices

2018

In this study we report novel 3,3′-bicarbazole based charge transporting materials mainly designed for a use in systems containing phosphorescent iridium (III) complex emitters. A low-cost oxidative coupling reaction using FeCl3 was employed in the synthesis of 3,3′-bicarbazole compounds. Different derivatives of 3,3′-bicarbazole with 4-ethoxyphenyland ethyl- substituents at 9,9′- positions and (2,2-diphenylhydrazono)methyl- and 4-(dimethylamino)styryl- substituents at 6,6′- positions were synthesized. Obtained (2,2-diphenylhydrazono)methyl- derivatives exhibit glass transition temperatures that are sufficient for applications in electronic devices. Thin amorphous films of good optical qual…

chemistry.chemical_classificationMaterials sciencechemistryElectron affinityOLEDPhysical chemistrychemistry.chemical_elementMoleculeIridiumElectron acceptorGlass transitionPhosphorescenceAmorphous solidOrganic Electronics and Photonics: Fundamentals and Devices
researchProduct

Emission Enhancement by Intramolecular Stacking between Heteroleptic Iridium(III) Complex and Flexibly Bridged Aromatic Pendant Group

2019

Phosphorescent iridium(III) complexes suffer from a strong aggregation quenching, limiting their use in solution-processed or crystalline organic light-emitting diodes. Here we report how an intramolecular stacking between a flexibly bridged bulky aromatic pendant group and the core of nonionic heteroleptic complex can be exploited to minimize the negative effects of this drawback. The stacked conformation provides a rigid sterical shielding of the polar molecular surface, improving photoluminescence quantum yield of the complex both in solution and crystalline state.

PhotoluminescenceQuenching (fluorescence)010405 organic chemistryStackingchemistry.chemical_elementQuantum yield010402 general chemistry01 natural sciences0104 chemical sciencesInorganic ChemistryCrystallographychemistryIntramolecular forceIridiumPhysical and Theoretical ChemistryPhosphorescencePendant groupInorganic Chemistry
researchProduct

Photophysical and Electrical Properties of Highly Luminescent 2/6-Triazolyl-Substituted Push-Pull Purines.

2021

This work is supported by the ERDF 1.1.1.1. activity project No. 1.1.1.1/16/A/131. The authors thank Dr. sc. ing. Jānis Zicāns and Dr. sc. ing. Remo Merijs Meri for DSC analyses.

ChemistryGeneral Chemical Engineering:NATURAL SCIENCES::Physics [Research Subject Categories]General ChemistryQD1-999ACS omega
researchProduct

Structure optimization of azobenzene oligomers for holography

2005

Azobenzene oligomer layers with side chain chromofore groups (ChG) has been experimentally studied to optimize scalar and vector hologram recording at 633 nm. ChG with different acceptors (Br, NO2, H, CN) and different bonding type to the matrix (dispersed without bonding or with covalent bonding) were used. The influence of oligomer matrix (polyvinylbuthirol, tolyle, hexamethylene, polyvinylpirolidone, double matrix) and spacers was also studied. The best results (the maximal diffraction efficiency of 7.9% and the minimal specific recording energy of 0.38 J/(cm2 %)) are obtained for ChG with one NO2 acceptor group covalently bonded to tolyle matrix. Double matrix considerably decreases the…

ChemistryHolographyDiffraction efficiencyOligomerAcceptorlaw.inventionchemistry.chemical_compoundMatrix (mathematics)CrystallographyAzobenzenelawCovalent bondPolymer chemistrySide chainphysica status solidi (c)
researchProduct

Thiphenylmethane based structural fragments as building blocks towards solution-processable heteroleptic iridium(iii) complexes for OLED use

2019

A novel structural approach to solution-processable heteroleptic iridium(III) complexes is presented. On the basis of 2-arylbenzo[d]thiazole cyclometalating main ligands and picolinic acid (pic) and acetylacetone (acac) ancillary ligands six new yellow or orange emitting materials were obtained using attached 1,1,1-triphenylmethylpentane substituents as aggregation preventing and solubility enhancing functional fragments. The obtained compounds show high photoluminescence quantum yield values in the range of 0.64 to 0.90. OLEDs with a spin-coated emissive layer were successfully prepared, with the highest achieved external quantum efficiency of 7.9%, current efficiency of 12.4 cd A−1 and po…

PhotoluminescenceAcetylacetonechemistry.chemical_elementQuantum yield02 engineering and technologyGeneral ChemistryPicolinic acid010402 general chemistry021001 nanoscience & nanotechnology01 natural sciencesCatalysis0104 chemical scienceschemistry.chemical_compoundchemistryMaterials ChemistryOLEDPhysical chemistryQuantum efficiencyIridium0210 nano-technologyThiazoleNew Journal of Chemistry
researchProduct

CCDC 1845861: Experimental Crystal Structure Determination

2019

Related Article: Kaspars Traskovskis, Valdis Kokars, Sergey Belyakov, Natalija Lesina, Igors Mihailovs, Aivars Vembris|2019|Inorg.Chem.|58|4214|doi:10.1021/acs.inorgchem.8b03273

Space GroupCrystallography(pyridine-2-carboxylate)-bis(2-(pyridin-2-yl)-5-(((333-triphenylpropanoyl)oxy)methyl)phenyl)-iridium acetonitrile solvateCrystal SystemCrystal StructureCell ParametersExperimental 3D Coordinates
researchProduct

CCDC 1436954: Experimental Crystal Structure Determination

2016

Related Article: Kaspars Traskovskis, Valdis Kokars, Andrejs Tokmakovs, Igors Mihailovs, Edgars Nitiss, Marina Petrova, Sergey Belyakov, Martins Rutkis|2016|J.Mater.Chem.C|4|5019|doi:10.1039/C6TC00203J

Space GroupCrystallographyacetic 13-bis(dicyanomethylene)-2-(4-(dimethylamino)benzylidene)indane-5-carboxylic anhydride benzene solvateCrystal SystemCrystal StructureCell ParametersExperimental 3D Coordinates
researchProduct