0000000001322902

AUTHOR

Diego Repetto

showing 9 related works from this author

Inverted Solution Processable OLEDs Using a Metal Oxide as an Electron Injection Contact.

2007

A new type of bottom-emission electroluminescent device is described in which a metal oxide is used as the electron-injecting contact. The preparation of such a device is simple. It consists of the deposition of a thin layer of a metal oxide on top of an indium tin oxide covered glass substrate, followed by the solution processing of the light-emitting layer and subsequently the deposition of a high-workfunction (air-stable) metal anode. This architecture allows for a low-cost electroluminescent device because no rigorous encapsulation is required. Electroluminescence with a high brightness reaching 5700 cd m–2 is observed at voltages as low as 8 V, demonstrating the potential of this new a…

chemistry.chemical_classificationBrightnessMaterials sciencebusiness.industryOxideFísicaPolymerElectroluminescenceCondensed Matter PhysicsElectronic Optical and Magnetic MaterialsIndium tin oxideBiomaterialschemistry.chemical_compoundchemistryElectrochemistryOLEDOptoelectronicsbusinessMaterialsVoltageDiodeAdvanced Functional Materials
researchProduct

A Supramolecularly-Caged Ionic Iridium(III) Complex Yielding Bright and Very Stable Solid-State Light-Emitting Electrochemical Cells

2008

A new iridium(III) complex showing intramolecular interligand pi-stacking has been synthesized and used to improve the stability of single-component, solid-state light-emitting electrochemical cell (LEC) devices. The pi-stacking results in the formation of a very stable supramolecularly caged complex. LECs using this complex show extraordinary stabilities (estimated lifetime of 600 h) and luminance values (average luminance of 230 cd m-2) indicating the path toward stable ionic complexes for use in LECs reaching stabilities required for practical applications.

Analytical chemistrySolid-statechemistry.chemical_elementIonic bondingGeneral ChemistryPhotochemistryBiochemistryLuminanceCatalysisElectrochemical cellColloid and Surface ChemistrychemistryIntramolecular forceIridiumJournal of the American Chemical Society
researchProduct

Dual-emitting Langmuir-Blodgett film-based organic light-emitting diodes.

2010

Langmuir-Blodgett (LB) films containing alternating layers of the metallosurfactants bis(4,4'-tridecyl-2,2'-bipyridine)-(4,4'-dicarboxy-2,2'-bipyridine) ruthenium(II)-bis(chloride) (1) and bis[2-(2,4-difluorophenyl)pyridine](4,4'-dinonadecyl-2,2'-bipyridine)iridium(III) chloride (2) have been prepared. Langmuir monolayers at the air-water interface of 1 and 2 with different anions in the subphase have been characterized by pi-A compression isotherms and Brewster angle microscopy (BAM). The transferred LB films have been characterized by IR, UV-vis and emission spectroscopy, and atomic force microscopy (AFM). Electroluminescent devices formed by LB films containing alternating layers of thes…

Chemistrychemistry.chemical_elementSurfaces and InterfacesElectroluminescenceCondensed Matter PhysicsLangmuir–Blodgett filmRutheniumBipyridinechemistry.chemical_compoundCrystallographyMonolayerElectrochemistryOLEDOrganic chemistryGeneral Materials ScienceIridiumLayer (electronics)SpectroscopyLangmuir : the ACS journal of surfaces and colloids
researchProduct

White Light-Emitting Electrochemical Cells Based on the Langmuir–Blodgett Technique

2014

Light-emitting electrochemical cells (LECs) showing a white emission have been prepared with Langmuir-Blodgett (LB) films of the metallosurfactant bis[2-(2,4-difluorophenyl)pyridine][2-(1-hexadecyl-1H-1,2,3-triazol-4-yl)pyridine]iridium(III) chloride (1), which work with an air-stable Al electrode. They were prepared by depositing a LB film of 1 on top of a layer of poly(N,N'-diphenyl-N,N'-bis(4-hexylphenyl)-[1,1'-biphenyl]-4,4'-diamine (pTPD) spin-coated on indium tin oxide (ITO). The white color of the electroluminescence of the device contrasts with the blue color of the photoluminescence of 1 in solution and within the LB films. Furthermore, the crystal structure of 1 is reported togeth…

PhotoluminescenceBrewster's angleMaterials scienceAnalytical chemistrySurfaces and InterfacesElectroluminescenceCondensed Matter PhysicsLangmuir–Blodgett filmIndium tin oxidesymbols.namesakeX-ray photoelectron spectroscopyMicroscopyMonolayerElectrochemistrysymbolsGeneral Materials ScienceSpectroscopyLangmuir
researchProduct

Dual-Emissive Photoluminescent Langmuir−Blodgett Films of Decatungstoeuropate and an Amphiphilic Iridium Complex

2009

Langmuir monolayers and Langmuir-Blodgett (LB) films of the decatungstoeuropate [Eu(W(5)O(18))(2)](9-) (EuW(10)) and the amphiphilic Ir complex 1 have been successfully fabricated by using the adsorption properties of the EuW(10) polyanion dissolved in the aqueous subphase onto a positively charged 1 monolayer at the air-water interface. The compression isotherms and Brewster angle microscopy (BAM) of monolayers of 1 on pure water (1 monolayer) and on a subphase containing 10(-6) M EuW(10) and 10(-3) M NaCl (1/EuW(10) monolayer) have been studied. Infrared and UV-vis spectroscopy of the transferred LB films indicate that EuW(10) and 1 molecules are incorporated within these LB films. X-ray …

Langmuireducation.field_of_studyBrewster's angleAqueous solutionPhotoluminescenceChemistrybusiness.industryAnalytical chemistrySurfaces and InterfacesCondensed Matter PhysicsLangmuir–Blodgett filmsymbols.namesakeOpticsMonolayerElectrochemistrysymbolsGeneral Materials ScienceDimethyldioctadecylammonium bromideeducationLuminescencebusinessSpectroscopyLangmuir
researchProduct

Air stable hybrid organic-inorganic light emitting diodes using ZnO as the cathode

2007

An air stable hybrid organic-inorganic light emitting device is presented. This architecture makes use of metal oxides as charge injecting materials into the light emitting polymer, avoiding the use of air sensitive cathodes commonly employed in organic light emitting diode manufacturing. We report the application of zinc oxide as a cathode in an organic light emitting device. This electroluminescent device shows high brightness levels reaching 6500 cd/m2 at voltages as low as 8 V. Compared to a conventional device using low workfunction metal cathodes, our device shows a lower turn-on voltage and it can operate in air.

BrightnessMaterials sciencePhysics and Astronomy (miscellaneous)business.industryFlexible organic light-emitting diodeElectroluminescenceCathodeInnovacions tecnològiqueslaw.inventionElectrònica molecularlawElectrodeOLEDOptoelectronicsWork functionbusinessLight-emitting diodeApplied Physics Letters
researchProduct

Photo-induced magnetic bistability in a controlled assembly of anisotropic coordination nanoparticles.

2011

International audience; Anisotropic coordination nanoparticles of the photomagnetic network Cs(I)(2)Cu(II)(7)[Mo(IV)(CN)(8)](4) are obtained through a surfactant-free high-yield synthetic procedure in water. These particles are organised as Langmuir-Blodgett films with a preferential orientation of the nano-objects within the film that exhibit a magnetic bistability below 20 K with a very large coercivity due to an efficient photo-transformation.

Materials scienceCondensed matter physics010405 organic chemistryMetals and AlloysNanoparticleNanotechnologyGeneral Chemistry[CHIM.MATE]Chemical Sciences/Material chemistryCoercivityOrientation (graph theory)010402 general chemistry01 natural sciencesCatalysis0104 chemical sciencesSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsMagnetic bistabilityMaterials ChemistryCeramics and CompositesAnisotropy
researchProduct

Patterning of Magnetic Bimetallic Coordination Nanoparticles of Prussian Blue Derivatives by the Langmuir–Blodgett Technique

2012

We report a novel method to prepare patterns of nanoparticles over large areas of the substrate. This method is based on the adsorption of the negatively charged nanoparticles dispersed in an aqueous subphase onto a monolayer of the phospholipid dipalmitoyl-l-α-phosphatidylcholine (DPPC) at the air-water interface. It has been used to prepare patterns of nanoparticles of Prussian blue analogues (PBA) of different size (K(0.25)Ni[Fe(CN)(6)](0.75) (NiFe), K(0.25)Ni[Cr(CN)(6)](0.75) (NiCr), K(0.25)Ni[Co(CN)(6)](0.75) (NiCo), Cs(0.4)Co[Cr(CN)(6)](0.8) (CsCoCr), and Cs(0.4)Co[Fe(CN)(6)](0.9) (CsCoFe)). The behavior of DPPC monolayer at the air-water interface in the presence of the subphase of P…

Prussian blueAqueous solutionBrewster's angleMaterials scienceNanoparticle02 engineering and technologySurfaces and Interfaces010402 general chemistry021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesLangmuir–Blodgett film0104 chemical sciencesCrystallographychemistry.chemical_compoundsymbols.namesakeAdsorptionchemistryMonolayerElectrochemistrysymbolsGeneral Materials Science0210 nano-technologyBimetallic stripSpectroscopyLangmuir
researchProduct

CCDC 1017983: Experimental Crystal Structure Determination

2015

Related Article: Jesús M. Fernández-Hernández, Luisa De Cola, Henk J. Bolink, Miguel Clemente-León, Eugenio Coronado, Alicia Forment-Aliaga, Angel López-Muñoz and Diego Repetto|2014|Langmuir|30|14021|doi:10.1021/la503144v

Space GroupCrystallographyCrystal Systembis(35-difluoro-2-(pyridin-2-yl)phenyl)-(2-(1-hexadecyl-1H-123-triazol-4-yl)pyridine)-iridium chloride chloroform solvateCrystal StructureCell ParametersExperimental 3D Coordinates
researchProduct