Search results for " Flux"
showing 10 items of 583 documents
Dielectric properties of reactor irradiated ferroelectric thin films
2001
Abstract Radiation effects in highly oriented Pb1Zr0.53Ti0.47O3 (PZT), Pb0.94La0.06Zr0.65Ti0.35O3 (PLZT-6), and PbiZriO3 (PZ) ferroelectric (FE) and antiferroelectric (AF) thin films are investigated in view of their possible application as a temperature sensitive element in a new bolometer system for ITER (International Thermonuclear Experimental Reactor). The dielectric properties (i.e. hysteresis loops, dielectric constants) of the films were investigated in a frequency range from 20 to 105 Hz and at temperatures up to 450 °C, before and after neutron irradiation to a neutron fluence of 5×1021 m−2 (E<0.1 MeV). The dielectric constant was measured during cooling with 1.7 °Cmin−1. The diel…
Friction behaviour of heat isolating coatings in machining: mechanical, thermal and energy-based considerations
2003
Abstract This paper deals with possible modifications of the frictional behaviour exhibited during the cutting process resulting from the influence of the most-commonly used heat isolating coatings deposited on a WC-Co carbide substrate. For this study, three- and four-layered coatings with intermediate Al 2 O 3 ceramic layer and a monolayer TiAlN coating, which offer superior thermal protection of the carbide substrate, were examined. Orthogonal cutting tests were carried out by end-turning medium carbon steel and austenitic stainless steel workpieces. The experimental study was aimed at determining the fundamental frictional characteristics: dimensions of the tool-chip contact area, the f…
Thermal Characterization of the Chip-Tool Interface When Using Coated Turning Inserts
2000
Abstract This paper reports some results of extensive experimental investigations of the thermal interactions between the coating/substrate and the moving surface of the chip. Semi-orthogonal cutting when bar turning a medium carbon steel and an austenitic stainless steel was carried out. Both flat-faced and grooved inserts coated with TiC, TiC/TiN, and TiC/Al 2 O 3 /TiN were tested. A standard K-type thermocouple embedded in the workpiece was used to convert measured efm's to the interfacial temperatures. In addition, the chiprake contact length and the area of contact were determined by using computer processing of scanned contact images. The minimum steady-state temperature at the interf…
<title>Changes in the temperature dependence of the dielectric constant in irradiated antiferroelectric thin films</title>
2003
A model describing the changes of the Curie-Weiss temperature in lead-zirconate thin films under neutron irradiation is proposed. The Curie-Weiss temperature in the irradiated material decreases which is connected to charges caused by neutron irradiation. The charges located near the surfaces due to Schottky effect and in the bulk of the film results in different rates of the Curie-Weiss temperature decreases with neutron fluence. However the influence of the Schottky layers seems to be more pronounced. Satisfactory agreement between the theoretical results and the experimental data is obtained for different neutron fluences.© (2003) COPYRIGHT SPIE--The International Society for Optical Eng…
Thermal–mechanical and thermal–hydraulic integrated study of the Helium-Cooled Lithium Lead Test Blanket Module
2010
Abstract The Helium-Cooled Lithium Lead Test Blanket Module (HCLL-TBM) is one of the two TBM to be installed in an ITER equatorial port since day 1 of operation, with the specific aim to investigate the main concept functionalities and issues such as high efficiency helium cooling, resistance to thermo-mechanical stresses, manufacturing techniques, as well as tritium transport, magneto-hydrodynamics effects and corrosion. In particular, in order to show a DEMO-relevant thermo-mechanical and thermal–hydraulic behavior, the HCLL-TBM has to meet several requirements especially as far as its coolant thermofluid-dynamic conditions and its thermal–mechanical field are concerned. The present paper…
The Magnetic Properties of Electrical Pulses Delivered by Deep-Brain Stimulation Systems
2020
The aim of this article is to analyze the magnetic field properties for both the monopolar and bipolar electrode configurations of deep-brain stimulation electrodes using 3-D magnetic field measurements and to investigate if the magnetic measurements enable a localization of the electrode as a proof of concept. Therefore, a simplified head phantom with an integrated deep-brain stimulation electrode was created to measure the magnetic flux densities in all the three dimensions with a fluxgate magnetometer over a sensor trajectory of measuring points inside the magnetically shielded chamber. The magnitude of the magnetic flux density for monopolar stimulation and bipolar stimulation is in the…
Metal thin-film temperature sensor embedded in heat-sink for CPV cells characterization
2014
The efficiency of a photovoltaic cell is dependent on its temperature, for this reason an accurate measurement of this parameter is important to fully characterize the device and to optimize its performance. For CPV applications a significant heat flux is needed to remove excess heat from the cell towards a heat sink, making it difficult to derive the cell temperature. In fact, measurements performed directly between the cell and the heat-sink, by use of commercial bulk sensors, would produce a significant disturbance in the heat flow; on the other hand, a measurement performed out of the cell / heat sink axis would be subject to large uncertainties, due to the high radial temperature gradi…
Temperature Dependence of Irradiation-Induced Magnetic Flux Loss in Nd 2 Fe 14 B Permanent Magnets
1990
Nd2Fe14B permanent magnets were irradiated with 20 MeV protons at 300 K and at 15 K, and the flux loss was measured as a function of the irradiation dose. The results show that at 15 K the Nd2Fe14B magnets can withstand particle radiation at least 1000 times more than at room temperature.
Behaviour of tritium in breeding materials
2005
Abstract The tritium release from ceramic materials of the HCPB under real DEMO operating conditions will depend not only on temperature and neutron flux but also on an intense magnetic field (MF) of 7–9 T. The delay in the tritium release induced by the MF is proportional to the grain size of the ceramics, the squared MF intensity and the abundance ratio of charged tritium forms (T + , T − ) in the grain volume of the ceramics. The effect of MFs of different intensity on the tritium release from the Li 4 SiO 4 pebbles irradiated in the EXOTIC-8 experiment (neutron fluence 2.4 × 10 25 n m −2 , irradiation temperature up to 700 K) was investigated in this study. As a result of the irradiati…
FINITE DIFFERENCE METHOD-BASED SIMULATION OF TEMPERATURE FIELDS FOR APPLICATION TO ORTHOGONAL CUTTING WITH COATED TOOLS
2005
ABSTRACT A finite difference method was proposed to model the effect of a variety of tool coatings on the magnitude and distribution of temperatures through the tool-chip contact region and the coating/substrate boundaries. For each workpiece-tool pair tested the intensity of uniformly distributed heat flux and relevant analytically obtained values of the heat partition coefficient were assumed to change with variations of cutting speed and the corresponding friction. In this case the simulation of an orthogonal machining of AISI 1045 steel was performed using special computing algorithm with elementary balances of induced energies (MBE). It is concluded that the temperature contours obtain…