Search results for " implantation."
showing 10 items of 677 documents
Light absorption and electrical transport in Si:O alloys for photovoltaics
2010
Thin films (100-500 nm) of the Si:O alloy have been systematically characterized in the optical absorption and electrical transport behavior, by varying the Si content from 43 up to 100 at. %. Magnetron sputtering or plasma enhanced chemical vapor deposition have been used for the Si:O alloy deposition, followed by annealing up to 1250 °C. Boron implantation (30 keV, 3-30× 1014 B/cm2) on selected samples was performed to vary the electrical sheet resistance measured by the four-point collinear probe method. Transmittance and reflectance spectra have been extracted and combined to estimate the absorption spectra and the optical band gap, by means of the Tauc analysis. Raman spectroscopy was …
Osseointegration of one-piece zirconia implants compared with a titanium implant of identical design: a histomorphometric study in the dog
2010
Objective: The aim of this study was to evaluate osseointegration of one-piece zirconia vs. titanium implants depending on their insertion depth by histomorphometry. Material and methods: Four one-piece implants of identical geometry were inserted on each side of six mongrel dogs: (1) an uncoated zirconia implant, (2) a zirconia implant coated with a calcium-liberating titanium oxide coating, (3) a titanium implant and (4) an experimental implant made of a synthetic material (polyetheretherketone). In a split-mouth manner they were inserted in submerged and non-submerged gingival healing modes. After 4 months, dissected blocks were stained with toluidine blue in order to histologically asse…
Histological and histomorphometrical analysis of a silica matrix embedded nanocrystalline hydroxyapatite bone substitute using the subcutaneous impla…
2010
The clinical suitability of a bone substitute material is determined by the ability to induce a tissue reaction specific to its composition. The aim of this in vivo study was to analyze the tissue reaction to a silica matrix-embedded, nanocrystalline hydroxyapatite bone substitute. The subcutaneous implantation model in Wistar rats was chosen to assess the effect of silica degradation on the vascularization of the biomaterial and its biodegradation within a time period of 6 months. Already at day 10 after implantation, histomorphometrical analysis showed that the vascularization of the implantation bed reached its peak value compared to all other time points. Both vessel density and vascula…
Double implantation in silica glass for metal cluster composite formation: a study by synchrotron radiation techniques
2001
Silica glass containing metal clusters is studied for both basic and applied aspects, related to the physics of cluster formation and to the optical properties of these materials. To obtain such composite structure, Cu+ Ni, Au+ Cu, Au+ Ag, Cu+ Co, and Cu+ Ag sequential implantations in fused silica were realized. The resulting systems, after possible annealing in various atmospheres, were studied by synchrotron radiation-based techniques, namely, extended X-ray absorption fine structure (EXAFS) spectroscopy, grazing incidence X-ray diffraction (GIXRD), and grazing incidence small angle X-ray scattering (GISAXS). The unique potential of these techniques is the capability to investigate dilut…
Planar Technology for NDT-Ge X-Ray Microcalorimeters: Absorber Fabrication
2009
We have investigated the electroplating process to deposit thick uniform films of tin on a Ge wafer coated with Spin‐On Glass, in order to fabricate the absorbers for Ge microcalorimeter arrays. Here we discuss some technological details and propose two alternative metal bilayer to be used as seed for the electroplating.
Energy leaks through the optical barrier created by H+ implantation in BaTiO3 and LiNbO3 planar waveguides
1998
Abstract The energy leaks through the index barrier created by the proton implantation process are put in evidence in planar optical waveguides made in BaTiO 3 and LiNbO 3 substrates. The selective detection of the light emerging from the guiding region permits to measure the optical attenuation of the guided wave. The results obtained on mono or twice implanted LiNbO 3 and BaTiO 3 waveguides are presented and discussed. It is shown that the light confinement is better in BaTiO 3 than in LiNbO 3 .
Repeatability of the resonance frequency analysis values in implants with a new technology
2019
Background Assess the reliability (by means of reproducibility and repeatability) of the PenguinRFA system, analyse the ISQ values of different implant types and correlate the ISQ with the insertion torque during the placement of the implant. Material and Methods 120 rough surface implants were placed in bovine bone (type II and III). The implants were divided into groups, according to its design. Once the implants were in place, the exact insertion torque was registered. Then, primary stability was measured by means of the resonance frequency analysis with the PenguinRFA and the Osstell ISQ devices. In each implant two transducers of each device were used. Three measurements were obtained …
Hydrogen- and helium-implanted silicon: Low-temperature positron-lifetime studies
1991
High-purity single-crystal samples of float-zoned Si have been implanted with 6.95-MeV protons and with 25-MeV {sup 3}He{sup 2} ions at 15 K, and the positron-lifetime technique has been used to identify the defects created in the samples, and to study the effects of H and He on the annealing of point defects in Si. The results have been compared with those of proton-irradiated Si. A 100--300-K annealing stage was clearly observed in hydrogen (H{sup +}) -implanted Si, and this stage was almost identical to that in the {ital p}-irradiated Si. The final annealing state of the H{sup +}-implanted Si started at about 400 K, and it is connected to annealing out of negatively charged divacancy-oxy…
The “accumulation effect” of positrons in the stack of foils, detected by measurements of the positron implantation profile
2013
The profiles of positrons implanted from the radioactive source 22Na into a stack of foils and plates are the subject of our experimental and theoretical studies. The measurements were performed using the depth scanning of positron implantation profile method, and the theoretical calculations using the phenomenological multi-scattering model (MSM). Several stacks consisting of silver, gold and aluminum foils, and titanium and germanium plates were investigated. We notice that the MSM describes well the experimental profiles; however when the stack consisting of silver and gold foils, the backscattering and linear absorption coefficients differ significantly from those reported in the litera…
Proton implanted waveguides in LiNbO3, KNbO3and BaTiO3
1992
Abstract By using a Van De Graaf accelerator, planar waveguides in LiNbO3, KNbO3, and BaTiO3 are fabricated (at 300 K) by thermally controlled proton implantation. The waveguide properties are investigated by dark line mode spectroscopy. The reconstructed profiles closely follow the ion concentration profiles as determined by simulation (TRIM).