Search results for " interfaces"
showing 10 items of 1158 documents
Structure and composition of sputter-deposited nickel-tungsten oxide films
2011
Films of mixed nickel-tungsten oxide, denoted NixW1-x oxide, were prepared by reactive DC magnetron co-sputtering from metallic targets and were characterized by Rutherford backscattering spectrometry. X-ray photoelectron spectroscopy, X-ray diffractometry and Raman spectroscopy. A consistent picture of the structure and composition emerged, and at x<0.50 the films comprised a mixture of amorphous WO3 and nanosized NiWO4, at x = 0.50 the nanosized NiWO4 phase was dominating, and at x>0.50 the films contained nanosized NiO and NiWO4.
EBIT diagnostics using X-ray spectra of highly ionized Ne
2003
We have carried out a detailed analysis of highly ionized neon spectra collected at the NIST EBIT using an NTD germanium X-ray microcalorimeter developed at the Harvard-Smithsonian Center for Astrophysics [Nucl. Instr. and Meth. A 444 (2000) 156]. Our attention was focused especially on the Ne IX He-like triplet to check electron density diagnostics through the intercombination/forbidden line ratio. We have investigated possible effects of the ion dynamics on the plasma emission line intensities, looking at the dependence of the count-rate and the charge state distribution on the electron beam energy and current. The temperature and spatial distribution of the neon ions, and hence the overl…
Using photoelectron emission microscopy with hard-X-rays
2001
We present several successful test cases of using photoelectron emission microscopy (PEEM) for photon energy up to 25 keV. First, the full extended X-ray absorption fine structure analysis was implemented in areas as small as 100 mum(2) for transition-metal K edge absorption spectra and, therefore, demonstrated the feasibility of combining structural and chemical analysis with hard-X-ray absorption spectroscopy with high lateral resolution. We also show that PEEM can be used in a transmission (radiography) mode as an imaging detector for hard-X-ray, This approach again leads to the unprecedented 0.3 mum lateral resolution, particularly critical for the use of coherence-based phase contrast …
Urea Glass Route as a Way to Optimize YAGG:Ce3+,Cr3+,Pr3+ Nanocrystals for Persistent Luminescence Applications
2022
A new approach for the synthesis of Y3Al2Ga3O12 (YAGG) nanophosphors allowing the preparation of crystallites with sizes starting from 45 nm is presented. The controllability of the energy and trap density of the resulting material samples by annealing temperature was confirmed by thermoluminescence (TL) measurements. It has been shown that the annealing of samples at temperatures up to 1300 degrees C does not cause any substantial growth of crystallites, still remaining below 100 nm, but leads to changes in the activation energy of the persistent luminescence (PersL) process. On the other hand, annealing above 1400 degrees C results in grain growth on the submicron scale, which was confirm…
Acoustic vibrations of metal nanoparticles: high order radial mode detection
2004
The vibrational radial modes of silver nanospheres embedded in a glass matrix are investigated using a high sensitivity femtosecond pump-probe technique. The results yield evidence for coherent launching of the fundamental and higher order radial modes in agreement with a sphere dilation mediated excitation model. The results are consistent with low-frequency Raman scattering experiments.
Relations between cavitation erosion resistance of materials and their fatigue strength under random loading
1999
Abstract The paper contains results of tests on fatigue strength under uniaxial random loading and cavitation erosion resistance for three steels: 10HNAP, 18G2A and 15G2ANb. The obtained fatigue and cavitation characteristics were used for determination of relations between these two phenomena. From the analysis it appears that there is correlation between fatigue strength of the material under random loading and its cavitation erosion resistance. It has been shown that fatigue tests under random loading and tests on cavitation erosion of 10HNAP, 18G2A and 15G2ANb steels may be described with a mathematical model of the same type. It has been also found that there is a linear relation, in t…
Probing the Conformational States of a pH-Sensitive DNA Origami Zipper via Label-Free Electrochemical Methods
2021
Funding Information: Financial support from EPSRC DTP (grant EP/R513349/1), the Emil Aaltonen Foundation, the Sigrid Jusélius Foundation, the Jane and Aatos Erkko Foundation, and the Vilho, Yrjö and Kalle Väisälä Foundation of the Finnish Academy of Science and Letters is gratefully acknowledged. This work was carried out under the Academy of Finland Centers of Excellence Programme (2014–2019). We acknowledge the provision of facilities and technical support by Aalto University Bioeconomy Facilities and OtaNano—Nanomicroscopy Center (Aalto-NMC) and Micronova Nanofabrication Center. Publisher Copyright: © 2021 The Authors. Published by American Chemical Society DNA origami structures represe…
MOCVD deposition of YSZ on stainless steels
2003
Abstract Yttria stabilized zirconia was deposited on stainless steel using the metal–organic chemical vapor deposition (MOCVD) technique, from β-diketonate precursors. The variation of the evaporation temperatures of yttrium and zirconium precursor allowed to control the level of Y within the film. Over the temperature range 125–150 °C, the Y content increased from 2.5 to 17.6 at.%. X-ray diffraction (XRD) analyses evidenced tetragonal phase of zirconia when the Y content was below 8 at.%, and cubic phase for higher concentration. Sputtered neutral mass spectrometry (SNMS) profiles confirmed that the control and stability of Y precursor temperature were of major importance to guarantee the …
Mechanical properties of aluminum, zirconium, hafnium and tantalum oxides and their nanolaminates grown by atomic layer deposition
2015
ABSTRACT The mechanical properties of two different metal oxide nanolaminates comprised of Ta 2 O 5 and Al 2 O 3 , HfO 2 or ZrO 2 , grown on soda–lime glass substrate by atomic layer deposition, were investigated. Ta 2 O 5 and Al 2 O 3 layers were amorphous, whereas ZrO 2 and HfO 2 possessed crystalline structure. Thickness of single oxide layers was varied between 2.5 and 15 nm. The total thickness of the laminate structures was in the range of 160–170 nm. The hardness values of single layer oxides on glass ranged from 6.7 GPa (Ta 2 O 5 ) to 9.5 GPa (Al 2 O 3 ). Corresponding elastic moduli were 96 GPa and 101 GPa. The hardnesses of laminates were in the range of 6.8–7.8 GPa and elastic mo…
Influence of grass cover on the leaching of herbicides in Burgundy vineyards.
2008
International audience