Search results for "Acrylonitrile"
showing 10 items of 67 documents
Chemical Modification of Nitrile to Oxazoline Functionality on a Styrene-Acrylonitrile Copolymer in the Melt
1998
Oxazoline is a very interesting functionality for reactive extrusion and other applications. In this paper, we report the possibility of chemically transforming nitrile group attached to a copolymer of styrene and acrylonitrile (SAN) to oxazoline group using 2-amino-ethanol (AE). The chemical modification of SAN with AE was done in the molten state. Among various catalysts tested, zinc acetate turned out to be the most efficient. The effects of the catalyst concentration, temperature and mixing on the overall kinetics were studied. The formation of the expected oxazoline functionality was confirmed by infrared spectroscopy and by reacting with 1-naphthylacetic acid. The reaction between the…
3-Aryl-2-[1H-benzotriazol-1-yl]acrylonitriles: a novel class of potent tubulin inhibitors.
2011
During a screening for compounds that could act against Mycobacterium tuberculosis, a series of new cellular antiproliferative agents was identified. The most cytotoxic molecules were evaluated against a panel of human cell lines derived from hematological and solid human tumors. In particular, (E)-2-(1H-benzo[d] [1,2,3]triazol-1-yl)-3-(4-methoxyphenyl)acrylonitrile (1) was found to be of a potency comparable to etoposide and greater than 6-mercaptopurine in all cell lines tested. Accordingly, a synthesis of a new series of (E)-2-(5,6-dichloro-1H-benzo[d] [1,2,3]triazol-1-yl)-3-(4-R-phenyl)acrylonitriles was conducted in order to extend the studies of structure-activity relationship (SAR) f…
Tailoring of the electronic properties of ZnO-polyacrylonitrile nanofibers: Experiment and theory
2017
Abstract We report the study of ZnO-polyacrylonitrile (ZnO-PAN) nanofibers fabricated by the combination of electrospinning and atomic layer deposition. The latter technique enables us to control the size of the surface of ZnO 1D nanostructures and hence its effectiveness for energy and biosensor applications. We observe the tendency of ZnO to form nanograins with increase of the layer thickness, and investigate the influence of the grain size on the electronic properties of the nanofibers. It is demonstrated that the ZnO work function (Φ) is strongly affected by surface band bending in the ZnO layer. The observed change of Φ in ZnO layers results from the curvature of the grain surface as …
Resource or waste? A perspective of plastics degradation in soil with a focus on end-of-life options.
2018
‘Capable-of-being-shaped’ synthetic compounds are prevailing today over horn, bone, leather, wood, stone, metal, glass, or ceramic in products that were previously left to natural materials. Plastic is, in fact, economical, simple, adaptable, and waterproof. Also, it is durable and resilient to natural degradation (although microbial species capable of degrading plastics do exist). In becoming a waste, plastic accumulation adversely affects ecosystems. The majority of plastic debris pollutes waters, accumulating in oceans. And, the behaviour and the quantity of plastic, which has become waste, are rather well documented in the water, in fact. This review collects existing information on pla…
Oxazoline-containing compatibilizers for polyamide/SAN and polyamide/ABS blends
2002
Polyamide (PA) and acrylonitrile/butadiene/styrene copolymer (ABS) may appear as a mixture in the recycled plastic stream. The incompatibility of these blends results in a blend with poor mechanical properties. The aim of this work is to partially convert the nitrile groups of the acrylonitrile/styrene copolymer (SAN) into oxazoline groups by reaction with aminoethanol (AE). Such modified SAN (SAN-m) can react with the amine or carboxylic acid end groups of PA, and therefore used as compatibilizers for blends of PA with ABS. SAN-m was found to reduce the SAN-domain size in the PA/SAN-blends. The initial acrylonitrile content of SAN-m had a strong influence on the degree of conversion into o…
Tuning of ZnO 1D nanostructures by atomic layer deposition and electrospinning for optical gas sensor applications
2015
We explored for the first time the ability of a three-dimensional polyacrylonitrile/ZnO material—prepared by a combination of electrospinning and atomic layer deposition (ALD) as a new material with a large surface area—to enhance the performance of optical sensors for volatile organic compound (VOC) detection. The photoluminescence (PL) peak intensity of these one-dimensional nanostructures has been enhanced by a factor of 2000 compared to a flat Si substrate. In addition, a phase transition of the ZnO ALD coating from amorphous to crystalline has been observed due to the properties of a polyacrylonitrile nanofiber template: surface strain, roughness, and an increased number of nucleation …
Novel poly (ionic liquid)-based anion exchange membranes for efficient and rapid acid recovery from industrial waste
2020
Abstract Owing to the less energy consumption, positive impact on the environment, and prospect of providing clean water resources, anion exchange membranes (AEMs) are promising materials for acid recovery from various industrial wastewater/effluent. Based on the diffusion dialysis process, AEMs selectively allow rapid proton permeation while efficiently retaining metal ions. To enhance the efficiency of the acid recovery process, precise control of macromolecular architecture and chemical composition that enables high hydrophilicity, proton conductivity through the membrane, and ion exchange capacity is required. In this direction, we report on the one-step fabrication of novel poly (ionic…
A study of spalling behaviour of PAN fibre-reinforced concrete by thermal analysis
1993
Comparisons are made between polypropylene (PP) fibres and polyacrylonitrile (PAN) fibres in order to relate the thermal properties of fibres with the respective fibre mortar behaviour under thermal exposure. Thermogravimetry (TG), differential scanning calorimetry (DSC) and thermochromatography (ThGC) are utilized. When a cementitious fibre mortar is being heated, several physical phenomena occur in the temperature range between 100°C and 200°C. There is a significant difference in the thermal behaviour between PP and PAN fibres. PP fibres melt at 160–170°C. The non‐melting behaviour of PAN fibre together with its rapid exothermic degradation reactions at around 300°C may add risk to the s…
CCDC 897060: Experimental Crystal Structure Determination
2015
Related Article: Thomas H. Schneider, Max Rieger, Kay Ansorg, Alexandre N. Sobolev, Tanja Schirmeister, Bernd Engels, Simon Grabowsky|2015|New J.Chem.|39|5841|doi:10.1039/C5NJ00368G
CCDC 897063: Experimental Crystal Structure Determination
2015
Related Article: Thomas H. Schneider, Max Rieger, Kay Ansorg, Alexandre N. Sobolev, Tanja Schirmeister, Bernd Engels, Simon Grabowsky|2015|New J.Chem.|39|5841|doi:10.1039/C5NJ00368G