Search results for "Amorphous solid"
showing 10 items of 622 documents
<title>Holographic properties of dielectric crystals and amorphous semiconductor films</title>
2001
Holographic recording properties and mechanisms are analyzed and compared in dielectric electrooptic crystals (EOC), dielectric colored alkali halide crystals (AHC) and amorphous semiconductor films (ASF) basing on author's investigations as well as on the literature data. Holographic photosensitivity parameters are introduced enabling the characterization of the recording mechanism efficiency independently of the particular optical and geometrical sample parameters, and allowing also for recording optimization. Ultimate specific recording energies for EOC, AHC and ASF are theoretically estimated. It is concluded that the ultimate recording energy for both crystalline and amorphous material…
Plasmonic effects of ultra-thin Mo films on hydrogenated amorphous Si photovoltaic cells
2012
We report on the improvement of short circuit current (JSC), fill factor (FF), and open circuit resistance (ROC) in hydrogenated amorphous silicon (a-Si:H) photovoltaic cells with a p-type/intrinsic/n-type structure, achieved by the addition of an ultra-thin molybdenum film between the p-type film and the transparent conductive oxide/glass substrate. For suitable conditions, improvements of ≈10% in average internal quantum efficiency and up to 5%–10% under standard illumination in JSC, FF, and ROC are observed. These are attributed to the excitation of surface plasmon polariton modes of the a-Si:H/Mo interface.
Crystallization kinetics of amorphous SiC films: Influence of substrate
2005
Abstract The crystallization kinetics of amorphous silicon carbide films was studied by means of X-ray diffractometry (XRD) and transmission electron microscopy (TEM). The films were deposited by radio frequency (r.f.) magnetron sputtering on glassy carbon and single crystalline silicon substrates, respectively. TEM micrographs and XRD patterns show the formation of nano-crystalline β-SiC with crystallite sizes in the order of 50 nm during annealing at temperatures between 1200 and 1600 °C. A modified Johnson–Mehl–Avrami–Kolmogorov (JMAK) formalism was used to describe the isothermal transformation of amorphous SiC into β-SiC as an interface controlled, three-dimensional growth processes fr…
Processing of amorphous Si by pulsed laser irradiation at different wavelengths
2012
Amorphous Si thin films deposited on thermally oxidized Si wafers have been processed by the 2 nd and 3 rd harmonics of Nd:YAG laser. Surface modification of amorphous silicon layers have been investigated by scanning electron microscopy before and after chemical etching of processed silicon films. The super-lateral crystal growth regime was achieved with laser fluence of 280 mJ/cm 2 for the 2 nd harmonics and 155 mJ/cm 2 for the 3 rd harmonics. The grain size in polycrystalline Si samples prepared by successive crystallization in the lateral growth regime is about 0.5 - 1 μm.
Amorphous Silicon Nanotubes via Galvanic Displacement Deposition
2013
Amorphous silicon nanotubes were grown in a single step into a polycarbonate membrane by a galvanic displacement reaction conducted in aqueous solution. In order to optimize the process, a specifically designed galvanic cell was used. SEM images, after polycarbonate dissolution, showed interconnected nanotube bundles with an average length of 18 μm and wall thickness of 38 nm.The deposited silicon was revealed by EDS analysis, whilst X-ray diffraction and Raman spectroscopy showed that nanotubes have an amorphous structure. Silicon nanotubes were also characterized by photo-electrochemical measurements that showed n-type conductivity and optical gap of ~1.6 eV. Keywords: Silicon nanotubes, …
Electroluminescence and transport properties in amorphous silicon nanostructures
2006
We report the results of a detailed study on the structural, electrical and optical properties of light emitting devices based on amorphous Si nanostructures. Amorphous nanostructures may constitute an interesting system for the monolithic integration of optical and electrical functions in Si ULSI technology. In fact, they exhibit an intense room temperature electroluminescence (EL), with the advantage of being formed at a temperature of 900 °C, while at least 1100 °C is needed for the formation of Si nanocrystals. Optical and electrical properties of amorphous Si nanocluster devices have been studied in the temperature range between 30 and 300 K. The EL is seen to have a bell-shaped trend …
Immobilization of functionalized lipids in a random poly(methacrylate) copolymer monolayer
1995
It is shown that a monolayer of random poly(methacrylate) copolymer with a hydrophobic and a hydrophilic substituent exhibits a transition from the fluid to amorphous state. Above this transition any amphiphilic molecules mixed with the monolayer are immobile. Furthermore, such functionalized lipids are immobilized in the monolayer during the Langmuir-Blodgett transfer. The hydrophilic head-groups of the biotin-lipids remain on the formerly water-adjacent side of the monolayer, even if this side is exposed to air
Glass-forming derivatives of 2-cyano-2-(4H-pyran-4-ylidene) acetate for light-amplification systems
2019
Abstract A series of 2-cyano-2-(4H-pyran-4-ylidene) acetate derivatives with triphenyl and 9H-carbazole moieties were synthesized and investigated, mostly for potential applications in organic solid state lasers. Synthesized compounds show remarkable amorphous film formation ability, tunable thermal properties (thermal stability varies from 190 °C to 387 °C and glass transition temperature from 94 °C up to 141 °C) with light absorption from 400 nm to 600 nm and photoluminescence from 600 nm up to 800 nm. Dyes with incorporated mono-styryl- electron donating fragment (KTB, KTBC and KTB3K) showed higher photoluminescence quantum yield (PLQY) (from 16% up to 23%), significantly lower amplified…
Amorphous TiO2 in LP-OMCVD TiNxOy thin films revealed by XPS
2001
Abstract TiN(O)–TiO 2 thin films were prepared on Si(1 0 0) by the low pressure organo metallic chemical vapor deposition (LP-OMCVD) method, using ammonia and titanium isopropoxide as precursors. In order to complete previous characterizations, an Ar + bombardment/XPS coupled study was carried out. This method is based on the fact that the behavior of a compound towards an ion bombardment is a function of its composition. In particular, Ar + bombardment of TiO 2 (whatever its form) leads to a preferential sputtering of oxygen atoms with subsequent reduction of titanium and formation of Ti 3+ and Ti 2+ easily detectable by XPS from a significant broadening of the Ti 2p lines. In the opposite…
Amorphous, nanocrystalline and crystalline calcium carbonates in biological materials
2010
Raman spectroscopy is a powerful tool in identifying different calcium carbonate polymorphs. Here, the method is applied to cultured pearls from freshwater (genus Hyriopsis) and marine bivalve species (Pinctada maxima) as well as to shells of Diplodon chilensis patagonicus bivalves. Raman spectra for vaterite, detected for the first time in an adult shell, and amorphous calcium carbonate (ACC) are discussed. Results for ACC are compared with those of synthetically produced ACC and with the Raman spectroscopic features of stable biogenic ACC from the crustacean Porcellio scaber. Decomposition of the most intense signal of all calcium carbonate polymorphs—the ν1 symmetric stretching mode of t…